linuxppc-2.5 / Sandpoint X2

[John Traill]

The existing switch configuration works for a 2.4 kernel. Changing S5 makes no difference.

Michael Habermann wrote:
>
> John Traill wrote:
>
>> However I'm not sure if this is indicative of an error in the changes
>> above or just the fact that the kernel isn't doing
>> anything else but service irq's.
>
>
> Check the switch S5, which changes the IRQ polarity. Maybe the interrupt
> line is always asserted.
> On a 8240 CPU, it needs reversed polarity.
>

--

Regards, John
___________________________________________________________________________


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/