tftp on ppcboot 1.1.5

[Arun Dharankar]

Following is different in my case (8260ADS board):
- Load address is 0x500000 (this may not be a problem)
- ethaddr is 00:11:22:33:44:55 (this prevented tftp in my case
   with similar symptoms as you describe if I used
   a1:b2:c3:d4:e5:c6, and I dont know why, and could
   be the problem in your case)
- tftp server has full path in inetd.conf; i.e. in.tftpd -s /tftpboot
  and then use tftp 0x500000 /tftpboot/testfile (this may not
  be a problem)
- Another possibility (as in my case of another similar board),
  the board was not setup properly in start.S.




On Wednesday 15 May 2002 04:46 am, gao xiaoguo wrote:
> I want to use tftp to download file into target machine,but always failed.
> The tftp server on linux has already been setup and tested, I tftp a file
> successfully by using other tftp client on windows.
>
> Following is my environment and operation log, and I found the ip/udp
> datagram on network really is 0.0.0.69->192.168.1.105,so nobody will answer
> to the tftp request. Why the ip address of server is changed from
> 192.168.1.105 to 0.0.0.69 ? Are there something I leave.
>
> CPU:   XPC860xxZPnnD3 at 48 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
> Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev ENG or PILOT
> DRAM:  (4 MB SDRAM)  8 MB
> FLASH:  2 MB
>
> =>printenv
>
> bootargs=
> bootcmd=bootm 2800100
> baudrate=115200
> loads_echo=1
> clocks_in_mhz=1
> ethaddr=00:00:00:01:02:03
> serverip=192.168.1.105
> ipaddr=192.168.1.99
> netmask=255.255.255.0
>
> =>tftpt boot 100000 testfile
>
> ARP broadcast 1
>
> Retry count exceeded; starting again
> ARP broadcast 1
> TFTP from server 192.168.1.105; our IP address is 192.168.1.99
> Filename 'testfile'.
> Load address: 0x100000
> Loading: *T T T T
> Retry count exceeded; starting again
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/