enet rx doesn't work

Walser, Martin mwalser at harris.com
Wed Mar 13 02:42:22 EST 2002


I've tried to use the enet over the LXT905. Tx seems to work, but I'm not able
to receive data from it.
I've measured the rxd, rclk and rena pins (the RENA signal is aktive high), but
they seems to be ok too.

But I get no rx interrupt, the scc_enet_interrupt is never called when receiving

I'm using kernel 2.4.4 from denx.

Any ideas?


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

More information about the Linuxppc-embedded mailing list