mvme5100 one more time...

[Xavier Grave]

Le sam, 01 sep 2001 01:29:04, Tom Rini a écrit :

> And if this fails, I just thought of one more thing (I need some hw I can
> test this on locally...).
> Look for:
> 	bl	flush_instruction_cache
> And add #if 0/#endif around that and try again...

I have done a pull this morning and applied your patchs. I have the same
results even
after the bl	flush_instruction_cache suppression.

Here is the result :
Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&701661, Bytes Loaded =&701661
Bytes/Second   =&701661, Elapsed Time =1 Second(s)

Exception: Program (Illegal Instruction)
SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700
IP     =001F0000 MSR    =00003040 CR     =00000000 FPSCR  =00000000
R0     =00000000 R1     =03F00000 R2     =00000000 R3     =00000000
R4     =00000000 R5     =49504C01 R6     =00007000 R7     =001F0000
R8     =03F0CF54 R9     =03F0CD54 R10    =03F0CD60 R11    =03F0CE54
R12    =03F0CE54 R13    =00000000 R14    =00000000 R15    =00000000
R16    =00000000 R17    =00000000 R18    =00000000 R19    =00000000
R20    =00000000 R21    =00000000 R22    =00000000 R23    =00000000
R24    =00000000 R25    =00000000 R26    =00000000 R27    =00000000
R28    =00000000 R29    =00000000 R30    =00000000 R31    =00000000
SPR0   =00000000 SPR1   =00000000 SPR8   =00000000 SPR9   =00000000
001F0000 00040000  WORD        $00040000

The board don't have any disk or system for the moment, perhaps this is the
problem ?
I just want to try to boot now... Because I have also a mvme2303 with a
whole debian
system on it. So if I have a kernel for the mvme5100 I will only need to
put my
SCSI PMC to have a complete system.

O+ xavier

--
33 (0) 1 69 15 79 59
De chacun selon ses forces, a chacun selon ses besoins

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/