Is CONFIG_8xx the right setting for MPC8240

[Dan Malek]

mschmid at ascona.de wrote:

> Is it wrong to select CONFIG_8xx for a MPC8240 CPU ?

Yes, it is.....

> I know that the sandpoint board or one of them also uses a MPC8240 but i
> don't know if CONFIG_8xx is used for that sandpoint board.

The 8240 is a CHRP/60x configuration.  Just select a 60x processor,
configure PCI, and your board peripherals.  Use the Sandpoint setup
as an example for your board configuration.  Any 8240 board should
be running Linux in just a couple of hours.........


	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/