Uncompress Ok, but cannot run linux kernel...

[zjuzhou at 163.net]

> Tom:

> I stumbled into the same problem a while ago.
>
> While I did not use a hardware debugger I used the sample demonstrating
> serial output to find that the Montavista kernel stops at the rfi
> instruction which is used to simultanoeusly turn on instruction and data
> address translation and to set the instruction pointer to the (remapped)
> start_here label. Unfortunately I lost my PPC hardware (405GP Walnut
> board) before I could find any solution.
>

	I meet same problem now.When I add CONFIG_MODULES into config file
HHL 2.2.14 works well(my borad is mpc850),but after add it ,I meet same
situation :after uncompressing kernel ,it do noting.It shoud display
LINUX_BANNER.
	If you find the solution,tell me.Thanks.

Dross


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/