Sandpoint 3 + MPC7450 + HHL2

Neil Wilson NWILSON at Airspan.com
Fri Jun 29 06:06:25 EST 2001


Yours !
It is the JourneyMan 2 ppc_82xx build.

-----Original Message-----
From: Mark A. Greer
To: Neil Wilson; 'linuxppc-embedded at lists.linuxppc.org'
Sent: 28/06/01 18:13
Subject: Re: Sandpoint 3 + MPC7450 + HHL2

BTW, what tree are you basing your code off of?
--

"Mark A. Greer" wrote:

> Neil Wilson wrote:
>
> > Got it working now....
> >
> > Not sure if these fixes are just Sandpoint3 or MPC7450 or the
combination,
> > but...
> >
> > 1) The openpic_init call in sandpoint_init_IRQ needs the offset
argument to
> > get the SIO int setup.
>
> Are you sure you want to do this???  The intsenses stuff in
sandpoint_setup.c
> is the way it is for a very good reason.  Can you send me your patch
so I can
> take a look?  Also, can you send the switch settings that you are
using.
>
> > 2) I also needed to add a enable of the TBEN in HID0 (bit
0x04000000) just
> > to get the kernel to think about booting at all - I put this in the
> > decompress_kernel function.
>
> I think that your sandpoint-specific boot head.S or somewhere else
like that
> would be a much better choice than the ppc-generic decompress_kernel
routine.
>
> > Do these sort of changes need pushing into the source tree ?, and if
so
> > would anyone care to explain how a newcommer does this, thanks.
>
> Let's hold off on this until people who have sandpoints can take a
look.
>
> Mark
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-embedded mailing list