microcode patch for smc1, scc3?

SangTae Ha stha at postech.edu
Fri Jul 6 15:53:39 EST 2001

You had better use smc2 instead. I had a exact same problem with you on my early work with 850DE. Finally  I used smc2 instead in order to bring up all interfaces. It works well.


SangTae Ha

----- Original Message -----
From: "Yoo. Jonghoon" <yooth at ipone.co.kr>
To: "linuxppc-embedded" <linuxppc-embedded at lists.linuxppc.org>
Sent: Friday, July 06, 2001 11:20 AM
Subject: microcode patch for smc1, scc3?

> Hi.
> my custom board(850DE) uses smc1 for console and
> scc2, scc3 for ethernet. I found that scc3 does not work
> because of conflicting dpram area.
> Does anybody know microcode patch relocates smc1
> to some other place? I've searched motorola site but
> couldn't find that.
> is there exists such microcode patch? or must I change
> console to smc2?
> thanks in advance.
> ===============================================
> Yoo. Jonghoon,        IPone inc.
> ===============================================
> e-mail : yooth at ipone.co.kr
> tel : 82-2-02-2222-4631
> ===============================================

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

More information about the Linuxppc-embedded mailing list