frequency in sandpoint_calibrate_decr
Mark A. Greer
mgreer at mvista.com
Thu Apr 12 04:39:18 EST 2001
Yep, I highly recommend upgrading to the latest fsmlabs version.
Mark
--
Dan Malek wrote:
> Sébastien Côté wrote:
>
> > In MontaVista's kernel 2.4.0-test2, the frequency in
> > sandpoint_calibrate_decr() is set to 66 Mhz. What frequency is this?
> > The processor, the bus ???
>
> That's the speed of the processor bus, usually from which all
> other core clocks are derived. You should be using a newer version
> of the kernel, at least from FSM Labs BitKeeper. In the source
> code pipeline is a change of the clock value from MHz to Hz.
>
> > Increasing this speed seems to get rid of my stability problems (at
> > last!), so I'd like to know the real value I should put there.
>
> Eh? On most systems it won't do anything but affect the ability
> of the kernel to keep time correctly.
>
> -- Dan
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list