Porting problems

[Cal Erickson]

Dag,
Looking at your panic it appears you are
accessing a memory location that is not valid.
Have you set up your board memory map
to include the addresses referenced? Try looking
at this first.
Cal

Dag Nygren wrote:

> Sorry, forgot something:
>
> The kernel is compiled from the generic linux-2.4.0-test6
> sources. Have tested with generic 2.2.14  and linux-2.4.0-test5
> as well and is doesn't seem to matter.
>
> --
> Dag Nygren                               email: dag at newtech.fi
> Oy NewTech Ab                            phone: +358 9 8024910
> Trasktorpet 3                              fax: +358 9 8024916
> 02360 ESBO                                 GSM: 0400-426312
> FINLAND
>

--
===========================================================================
Cal Erickson                 MontaVista Software Inc.
Customer Support Engineer    490 Potrero Avenue
Phone (408) 328-0304         Sunnyvale CA 94085
Fax   (408) 328-9204         e-mail cal_erickson at mvista.com
Pager 877-566-2012           support 1-800-759-8888 pin 202-7489
web http://www.mvista.com    support e-mail: support at mvista.com
eCode: http://cal@work.com.ecode.com
===========================================================================


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/