root filesystem over nfs

Hai-Pao Fan haipao at mvista.com
Tue Oct 24 07:50:57 EST 2000


This is one of the changes I made in eepro100.c for the ppc 4xx system. I think
the maintainer should know this also.


"ZHANG,HAI-TAO (Non-A-China,ex1)" wrote:

> Hi,
>
> I tried to change one line in eepro100.c and now the 2.4.0-test9 boot is ok.
>
> $ diff eepro100.c eepro100.c.orig
> 1098c1098
> <       outl(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE),
> ---
> >       outl(cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE)),
>
> It seems like the endianess is changed twice so the kernel hangs up. Maybe
> we should define some macros like outl for CONFIG_SANDPOINT.
>
> Thanks,
> Haitao Zhang
>
> > -----Original Message-----
> > From: ZHANG,HAI-TAO (Non-A-China,ex1)
> > [mailto:hai-tao_zhang at non.agilent.com]
> > Sent: Friday, September 29, 2000 10:15 PM
> > To: Rainer Kloud; linuxppc-embedded
> > Subject: RE: root filesystem over nfs
> >
> >
> >
> > Hi,
> >
> > I met the same problem with 2.4.0-test2 or test9 kernel on
> > the sandpoint
> > 603e/MPC107. The problem happened on executing /sbin/init
> > both on nfsroot or
> > root fs on IDE. The backtrace and printk messages show that
> > exeception(or
> > hang-up) is in pad_zero() from load_elf_binary (fs/binfmt_elf.c).
> >
> > Thanks,
> > Haitao Zhang
> >
> >
> >
> > > -----Original Message-----
> > > From: Rainer Kloud [mailto:rainer.kloud at siemens.at]
> > > Sent: Friday, September 29, 2000 6:58 PM
> > > To: linuxppc-embedded
> > > Subject: root filesystem over nfs
> > >
> > >
> > >
> > > Dear All,
> > >
> > > I'm porting the 2.4.0-test4 kernel to my Scout Board
> > > (MPC750/MPC8260) and I have finished everything until
> > > executeing the init process (shell) on the remote
> > > filesystem (mounted over nfs).
> > >
> > > When the kernel executes the init process (in my case
> > > a programm which calls only a printf and then sleeps
> > > forever) I get a Machine check exception (the backtrace
> > > tells me in set_brk called from load_elf_binary).
> > >
> > > Does anybody know whats going wrong? Whow has my remote
> > > root filesystem look like (I have compiled my own glibc,
> > > modprobe, sh and ls)? Is there any information on the web
> > > available?
> > >
> > > My remote filesystem looks like the following:
> > >
> > > PCC141:/tftpboot/LinuxPQ2 # ls -lR
> > > total 5
> > > drwxr-xr-x   5 root     root         1024 Sep 29 09:56 .
> > > drwxrwxrwx   5 root     root         1024 Sep 25 10:08 ..
> > > drwxr-xr-x   2 root     root         1024 Sep 29 13:06 bin
> > > drwxr-xr-x   2 root     root         1024 Sep  8  1998 dev
> > > drwxr-xr-x   2 root     root         1024 Sep 29 13:03 lib
> > > lrwxrwxrwx   1 root     root            3 Sep 29 09:56 sbin -> bin
> > >
> > > bin:
> > > total 849
> > > drwxr-xr-x   2 root     root         1024 Sep 29 13:06 .
> > > drwxr-xr-x   5 root     root         1024 Sep 29 09:56 ..
> > > -rwxr-xr-x   1 root     root        67907 Sep 29 10:56 depmod
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 10:56 insmod
> > > -rwxr-xr-x   1 root     root          359 Sep 29 10:56
> > > insmod_ksymoops_clean
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 10:56 kallsyms
> > > -rwxr-xr-x   1 root     root          451 Sep 29 10:56 kernelversion
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 10:56 ksyms
> > > -rwxr-xr-x   1 root     root        54584 Sep  8  1998 ls
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 10:56 lsmod
> > > -rwxr-xr-x   1 root     root        57876 Sep 29 10:56 modinfo
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 11:31 modprobe
> > > -rwxr-xr-x   1 root     root       106133 Sep 29 10:56 rmmod
> > > -rwxr-xr-x   1 root     root        33073 Sep 29 10:56 sh
> > >
> > > dev:
> > > total 2
> > > drwxr-xr-x   2 root     root         1024 Sep  8  1998 .
> > > drwxr-xr-x   5 root     root         1024 Sep 29 09:56 ..
> > > lrwxrwxrwx   1 root     root            5 Sep 29 09:51
> > > console -> ttyS0
> > > crw-r--r--   1 root     root       5,   0 Sep  8  1998 tty
> > > crw-r--r--   1 root     root       4,  64 Sep  8  1998 ttyS0
> > >
> > > lib:
> > > total 4456
> > > drwxr-xr-x   2 root     root         1024 Sep 29 13:03 .
> > > drwxr-xr-x   5 root     root         1024 Sep 29 09:56 ..
> > > -rwxr-xr-x   1 root     root       379736 Sep 29 11:07 ld-2.1.3.so
> > > lrwxrwxrwx   1 root     root           11 Sep 29 11:08 ld.so.1 ->
> > > ld-2.1.3.so
> > > -rwxr-xr-x   1 root     root      4160040 Sep 29 11:08 libc-2.1.3.so
> > > lrwxrwxrwx   1 root     root           13 Sep 29 11:09 libc.so.6 ->
> > > libc-2.1.3.so
> > >
> > > Does anybody know whats going wrong, and what should
> > > I try to get the init programm running?
> > >
> > > Thank you,
> > > Rainer
> > >
> > >
> > >
> > > scout> go 600000
> > > Disable Cash !!!
> > > Jump to Addr: 0x600000 ...
> > > loaded at:     00600000 0060B274
> > > relocated to:  00400000 0040B274
> > > board data at: 0000002E 0000005A
> > > relocated to:  00200100 0020012C
> > > zimage at:     00606000 00680A51
> > > avail ram:     00681000 02000000
> > >
> > > Linux/PPC load:
> > > Uncompressing Linux...done.
> > > Now booting the kernel
> > > Total memory = 32MB; using 128kB for hash table (at c0160000)
> > > Linux version 2.4.0-test4 (kloud at PCC141) (gcc version
> > 2.95.2 19991024
> > > (release)) #74 Fri Sep 29 12:40:20 CEST 2000
> > > Boot arguments: root=/dev/nfs rw
> > > On node 0 totalpages: 8192
> > > zone(0): 8192 pages.
> > > zone(1): 0 pages.
> > > zone(2): 0 pages.
> > > Kernel command line: root=/dev/nfs rw
> > > Calibrating delay loop... 3434.09 BogoMIPS
> > > Memory: 30720k available (912k kernel code, 388k data, 52k init)
> > > [c0000000,c2000000]
> > > Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
> > > Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
> > > Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
> > > Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
> > > POSIX conformance testing by UNIFIX
> > > Linux NET4.0 for Linux 2.3
> > > Based upon Swansea University Computer Society NET3.039
> > > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > > NET4: Linux TCP/IP 1.0 for NET4.0
> > > IP Protocols: ICMP, UDP, TCP, IGMP
> > > IP: routing cache hash table of 512 buckets, 4Kbytes
> > > TCP: Hash tables configured (established 2048 bind 2048)
> > > Starting kswapd v1.6
> > > CPM UART driver version 0.01
> > > ttyS00 at 0x8000 is a SCC
> > > pty: 256 Unix98 ptys configured
> > > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024
> > blocksize
> > > loop: registered device at major 7
> > > loop: enabling 8 loop devices
> > > fcc_startup: gfmr: 0x2000003c, fccm: 0x1a0000, mask: 0x1a,
> > fcce: 0x0,
> > > fpsmr: 0x80, fdsr: 0xd555
> > > eth0: FCC ENET Version 0.2, 08:00:06:08:e6:16
> > > Serial driver version 5.01 (2000-05-29) with no serial
> > options enabled
> > > PPP generic driver version 2.4.1
> > > IP-Config: Entered.
> > > IP-Config: Opened eth0 (able=1)
> > > BOOTP: XID=72eef6f4
> > > Sending BOOTP requests....ic_bootp_recv
> > > BOOTP: Got extension 01 ff ff ff 00
> > > BOOTP: Got extension 11 2f 74 66 74 70 62 6f 6f 74 2f 4c 69
> > > 6e 75 78 50
> > > 51 32
> > > ic_bootp_recv
> > >  OK
> > > IP-Config: Got BOOTP answer from 195.9.17.222, my address is
> > > 195.9.17.216
> > > IP-Config: device=eth0, local=c30911d8, server=c30911de,
> > > boot=c30911de,
> > > gw=ffffffff, mask=ffffff00
> > > IP-Config: host=195.9.17.216, domain=(none),
> > path=`/tftpboot/LinuxPQ2'
> > > kmem_create: Forcing size word alignment - nfs_fh
> > > Looking up port of RPC 100003/2 on 195.9.17.222
> > > Looking up port of RPC 100005/2 on 195.9.17.222
> > > VFS: Mounted root (nfs filesystem).
> > > Freeing unused kernel memory: 52k init
> > > init: execute /bin/sh
> > > Machine check in kernel mode.
> > > Caused by (from SRR1=49030): Transfer error ack signal
> > > NIP: C000D5E4 XER: 20000000 LR: C004B830 REGS: c0129a30 TRAP: 0200
> > > MSR: 00049030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> > > TASK = c0128000[6] 'modprobe' Last syscall: 11
> > > last math 00000000 last altivec 00000000
> > > GPR00: 000001E1 C0129AE0 C0128000 00000000 00000784
> > 00000000 10023890
> > > 00000000
> > > GPR08: 30000000 00000000 C01271E0 C02491E0 0000000C
> > D4B1D575 1002387C
> > > 100234C8
> > > GPR16: 10000000 1002387C 1002387C 00000002 100242F6
> > 30010654 C0215620
> > > 00000006
> > > GPR24: C01271E0 100234C8 00001812 00000000 1002387C
> > 1002387C C0129C78
> > > C0232720
> > > Call backtrace:
> > > C004B7E0 C004C850 C003D44C C003D808 C0006B70 C00048AC C00201CC
> > > C00202A8 C00095B0
> > > Kernel panic: machine check
> > > Rebooting in 180 seconds..
> > >
> > >
> >
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-embedded mailing list