Linux boot failed on Sandpoint under baudrate 38400

[Zhaobin Zhu]

"Mark A. Greer" wrote:

> What do you mean by garbled?  Do you mean the characters look okay but some
> seem to be missing or just a bunch of strange characters?
>

 a bunch of strange characters.

>
> The kernel, the bootloader, and DINK all need to be set up for the same baud
> rate.  It sounds like you have dink and the bootloader setup for one baud rate
> and the kernel is probably still at 9600.  Could that be the case?
>
> Mark
>

Yes, I set bootloader(arch/ppc/boot/ns16550.c)  and DINK (sb -k 38400) to 38400.
So where do I change the baud rate for kernel ?

Thanks,
--
 Zhaobin Zhu
 zzhu at emc.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/