help -- PCMCIA for MPC860

Mark S. Mathews mark at absoval.com
Tue May 9 14:03:47 EST 2000


Here at AVS, Jo-Ellen has been through all the fun of setting up PCMCIA.
She's prepared some fairly detailed notes.  They can be found at:

ftp://ftp.absoval.com/pub/rpxlite/

Best of luck,
-Mark

On Tue, 9 May 2000, Shuangjun Zhu wrote:

>
> Dan,
>
> When will you release the patch: PCMCIA for mpc8xx-linux 2.2.13?
> It seems that you have completed the work.
>
> The David Hinds's pcmcia-cs and Magnus's patch even
> could not pass the compiling.
> =============================================================
> make[1]: Entering directory `/home/sjzhu/tmp/pcmcia-cs-3.1.10/modules'
> powerpc-linux-gcc -fno-builtin -msoft-float -ffixed-r2  -MD -O2 -Wall -Wstri
> ct-p
> rototypes -pipe -I../include -I/home/sjzhu/linux-2.2.13-embedded/include  -D
> __KE
> RNEL__ -DMODULE -c cs.c
> In file included from ../include/pcmcia/k_compat.h:105,
>                  from cs.c:35:
> /home/sjzhu/linux-2.2.13-embedded/include/linux/module.h:19:
> linux/modversions.h
> : No such file or directory
> ==============================================================
>
> For the kernel, Magnus said that I must modify the kernel, following is the
> error:
> ----------------------------------------------------------------------------
> ----
> make[1]: Entering directory
> `/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
> powerpc-linux-gcc -D__KERNEL__ -I/home/sjzhu/linux-2.2.13-embedded/include -
> Wall
>  -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -D__power
> pc__
>  -fsigned-char -msoft-float -pipe -fno-builtin -ffixed-r2 -Wno-uninitialized
>  -mm
> ultiple -mstring -mcpu=860 -I../8xx_io   -c -o m8xx_setup.o m8xx_setup.c
> m8xx_setup.c: In function `m8xx_init':
> m8xx_setup.c:536: structure has no member named `ide_request_irq'
> make[1]: *** [m8xx_setup.o] Error 1
> make[1]: Leaving directory
> `/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
> make: *** [_dir_arch/ppc/kernel] Error 2
> ----------------------------------------------------------------------------
> ---------
>
> Thanks,
> Shuangjun
>
>
>
> -----Original Message-----
> From: Dan Malek <dan at netx4.com>
> To: Shuangjun Zhu (r44089) <r44089 at email.sps.mot.com>
> Cc: linuxppc-embedded at lists.linuxppc.org
> <linuxppc-embedded at lists.linuxppc.org>;
> damm at kieraypc01.p.y.ki.era.ericsson.se
> <damm at kieraypc01.p.y.ki.era.ericsson.se>
> Date: Monday, May 08, 2000 10:53 PM
> Subject: Re: help -- PCMCIA for MPC860
>
>
> >
> >Shuangjun Zhu wrote:
> >
> >> where can I get the code of PCMCIA-IDE for MPC8xx-linux-2.2.13?
> >
> >Pieces of it are already in the kernel.  Scan the mailing list
> >archives to get Mangus' real PCMCIA patches.
> >
> >In addition to this software, you will need to make (potentially lots of)
> >modifications to support powering the cards, unless your hardware folks
> >did this for you.
> >
> >
> > -- Dan
> >
> >
>
>
>


Mark S. Mathews

AbsoluteValue Systems      Web:    http://www.absoval.com
P.O. Box 941149            e-mail: mark at absoval.com
Maitland, FL 32794-1149    Phone:  407.644.8582
USA                        Fax:    407.539.1294


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-embedded mailing list