Compile gdbserver for powerpc

[Graham Stoney]

On Tue, 20 Jun 2000 10:35:21 -0500, Lucinda Schafer <lucsch at adaptivemicro.com>
writes:
>>From Graham Stoney's "Linux for PowerPC Embedded Systems HOWTO/FAQ", Section
...
>18.3 Kernel
>It is not currently possible to use gdb for kenel debugging.

Murray Jensen writes:
> Whoops. This should probably change.

It already had. Lucinda must be looking at an old copy of the HOWTO.

Regards,
Graham
--
Graham Stoney
Principal Hardware/Software Engineer
Canon Information Systems Research Australia
Ph: +61 2 9805 2909  Fax: +61 2 9805 2929

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/