Problem compiling arch/ppc/kernel/setup.c, Linux 2.4.0-test1-ac18
diekema_jon
diekema at bucks.si.com
Sat Jun 17 02:00:44 EST 2000
To: linuxppc-embedded at lists.linuxppc.org,dan_malek at mvista.com
Problem compiling arch/ppc/kernel/setup.c:
Linux: 2.4.0-test1-ac18
gmake -C arch/ppc/kernel
gmake[1]: Entering directory `/usr/people/diekema/bk/linux-2.3/arch/ppc/kernel'
/opt/hardhat/devkit/ppc/8xx/bin/powerpc-linux-gcc -D__KERNEL__
-I/usr/people/diekema/bk/linux-2.3/include -Wall -Wstrict-prototypes
-O2 -fomit-frame-pointer -fno-strict-aliasing -D__powerpc__
-fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized
-mmultiple -mstring -DEXPORT_SYMTAB -c setup.c
setup.c: In function `identify_machine':
setup.c:573: warning: implicit declaration of function `m8260_init'
setup.c: In function `setup_arch':
setup.c:715: `dcache_bsize' undeclared (first use in this function)
setup.c:715: (Each undeclared identifier is reported only once
setup.c:715: for each function it appears in.)
setup.c:715: `icache_bsize' undeclared (first use in this function)
setup.c:718: `ucache_bsize' undeclared (first use in this function)
gmake[1]: *** [setup.o] Error 1
gmake[1]: Leaving directory `/usr/people/diekema/bk/linux-2.3/arch/ppc/kernel'
gmake: *** [_dir_arch/ppc/kernel] Error 2
Patches to eliminate compile problems:
===== arch/ppc/kernel/ppc_ksyms.c 1.36 vs 1.37 =====
--- 1.36/arch/ppc/kernel/ppc_ksyms.c Fri Jun 16 10:23:38 2000
+++ 1.37/arch/ppc/kernel/ppc_ksyms.c Fri Jun 16 10:54:43 2000
@@ -82,7 +82,7 @@
EXPORT_SYMBOL(kernel_flag);
#endif /* CONFIG_SMP */
-#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) && !defined(CONFIG_8260)
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
===== arch/ppc/kernel/setup.c 1.36 vs 1.37 =====
--- 1.36/arch/ppc/kernel/setup.c Fri Jun 16 02:39:12 2000
+++ 1.37/arch/ppc/kernel/setup.c Fri Jun 16 11:13:44 2000
@@ -131,14 +131,6 @@
};
/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-/*
* I really need to add multiple-console support... -- Cort
*/
int __init pmac_display_supported(char *name)
@@ -166,6 +158,14 @@
16 /* orig-video-points */
};
#endif /* !CONFIG_4xx && !CONFIG_8xx */
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
void machine_restart(char *cmd)
{
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list