WARNING OFF TOPIC SLIGHTLY: 8xx MMU w/8MB pages
Christer Weinigel
wingel at cendio.se
Wed Jan 19 05:28:19 EST 2000
alan.corp.packetengines.com wrote:
>I tried using the MD_CAM and MD_RAMn registers to debug this. These seem to
>read back the values I have stored via the MD_RPN, MD_TWC and MD_RPN register
>EXCEPT that when I read back I get a value for the MD_CAM.PS field of 110
>rather than the 111 which is the documented 8MB page size value. The doc even
>says that values other than those listed (000, 001, 011, 111) are "reserved".
>The value I am setting in the MD_TWC.PS field (which is oddly a two bit
>encoding for page size) is 11, which is documented as the 8MB page
>size value.
This is simple :-) Or rather, I was tearing my hair out last week
trying to figure out exactly the same thing. Set the 4/16k bit in
MD_RPN to 1 and it'll work. Apparently, the two page size bits in
MD_TWC and the bit från MD_RPN together form the real page size. The
documentation is a bit misleading here.
Now I'd just like to know why I can't get 8 MB pages working with the
Linux page tables. The performance boost from putting the Linux
kernel in an 8 MB page on a MPC850 is rather impressive, most lmbench
system call benchmarks went twice as fast.
/Christer
--
Christer Weinigel Cendio Systems AB
Email: wingel at cendio.se Teknikringen 8
Phone: +46-13-21 46 00 583 30 Linköping
Fax: +46-13-21 47 00 Sweden
[please note that Signum Support has changed its name to Cendio Systems]
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list