MVME 5100

[Matt Porter]

On Mon, Dec 18, 2000 at 04:34:57PM +0100, Gabriel Paubert wrote:
>
>
> On Fri, 15 Dec 2000, Matt Porter wrote:
>
> >
> > On Thu, Dec 14, 2000 at 04:25:55PM +0100, Torsten Rissel wrote:
> > > Thanks, but I have already set up a BAT to cover the area from 0xf0000000 - 0xffffffff
> > > because everything is there on the MVME5100 - the serial ports (via the Hawk external
> > > registers) [fef88000+], the MPIC [f3f80000+] and the PHC PCI registers [fe000000+].
> >
> > Right, I have one as well as a similar Hawk-based board that has Linux
> > on it.
> >
> > > The CONFIG_ADDRESS and CONFIG_DATA registers are on fe000cf8 and fe00cfc,
> > > and still writing to the CONFIG_ADDRESS and then reading the CONFIG_DATA sometime
> > > works and sometimes not !!!??
> >
> > I can consistently read from and write to config space on my 5100 board
> > via PPCBUG.  The only thing I can think of is that you have somehow
> > locked up the Hawk bridge.  I've managaged this on other host bridges
> > only by getting a PIB locked up and squatting on the bus.
>
> On the MVME2400 (and older Raven/Falcon based boards) the config space by
> default is at 0x80000cf8 and 0x8000cfc. Does it mean that on the MVME5100,
> the Hawk is reprogrammed by PPCBUG to look like a CHRP system ?

Yes...and Yes. :)  The only thing the newer MCG boards really do
(correctly) that looks like a PReP system is the disk booting
mechanism.

BTW, the MVME2100 (8240/Universe II board) is put in map B for a CHRP
map as well.

--
Matt Porter
MontaVista Software, Inc.
mporter at mvista.com

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/