2.4.0-test11 - MPC860T FEC question.
Wolfgang Denk
wd at denx.de
Thu Dec 7 10:47:56 EST 2000
Hi Dan,
in message <3A2EB9A5.65311F2E at mvista.com> you wrote:
>
> I don't like the queue_task stuff (this wasn't my doing). The MII/link
> interrupt should be handled as part of the interrupt handler like it
> used to be (until the late 2.3.99 code when this was changed).
Well, I just spent more than an hour to back-port the FEC stuff to
the 2.2.14 kernel because I needed a working FEC driver there, and
fast.
> The 8260 is very incomplete. The problem is the MII control/status
> is disconnected from the ethernet controller. The 860T FEC would
> generate an interrupt when the bit shifting was done, but the 8260
> requires software to do this. The 8260 is going to get one of two
> equally ugly solutions, either a tasklet that runs for the purpose of
> managing the MII, or to simply to software shift and poll the MII in
> line with other functions. I stared with the FEC driver on the 8260,
I don't like the idea of having completely different code in several
places for dealing with essentially the same thing.
Now we have the FEC code for the 8xx in 2.2.14, for the 8xx in 2.4.x,
and for the 82xx in 2.4.x - and it's difficult to recognize common
parts.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
"Wagner's music is better than it sounds." - Mark Twain
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list