Fw: How to caculate the MIPS of my MVME2600?

[Gong Zhuo]

----- Original Message -----
From: Gong Zhuo <gongzhuo at 163.net>
To: Gong Zhuo <gongzhuo at 163.net>
Sent: Tuesday, August 22, 2000 11:10 AM
Subject: Fw: How to caculate the MIPS of my MVME2600?


>
> ----- Original Message -----
> From: Gong Zhuo <gongzhuo at 163.net>
> To: linuxppc dev <linuxppc-dev at lists.linuxppc.org>
> Sent: Monday, August 21, 2000 4:20 PM
> Subject: How to caculate the MIPS of my MVME2600?
>
>
> > Hi:
> >    I am developing program under MVME2600. But I found the program is
not
> as
> > fast as I think. So I tested my computer board using the mothed like
this
> > and get some impossible results:
> >
> >   * fill the mem from 0x4000 to 0x8000 with instruction 'or r0,r0,r0'
> >   * DEC ==> r3, us counter value ==> r13 at 0x4000
> >   * DEC ==> r4, us counter value ==> r14 at 0x8000
> >   * breakpoint at 0x8008
> >   * go from 0x4000
> >
> > The display of PPCbug like this:
> >
> > Copyright Motorola Inc. 1988 - 1997, All Rights Reserved
> >
> > PPC1 Debugger/Diagnostics Release Version 3.5 - 01/30/98 RM01
> > COLD Start
> >
> > Local Memory Found =04000000 (&67108864)
> >
> > MPU Clock Speed =200Mhz
> >
> > BUS Clock Speed =67Mhz
> >
> > WARNING: Keyboard Not Connected
> >
> > Reset Vector Location  : ROM Bank A
> > Mezzanine Configuration: Single-MPU
> > Current 60X-Bus Master : MPUIdle MPU(s)            : NONE
> >
> > System Memory: 64MB, ECC Enabled (ECC-Memory Detected)
> > L2Cache:       256KB
> >
> > PPC1-Bug>
> >
> > PPC1-Bug>bf 4000:4000 7c000378 ;w
> > Effective address: 00004000
> > Effective count  : &65536
> > PPC1-Bug>as 4000
> > 00004000 3D80FEF8  ADDIS       R12,R0,$FEF8?
> > 00004004 81AC0100  LWZ         R13,$100(R12) ($00000100)
> > 00004008 7C7602A6  MFSPR       R3,22
> > 0000400C 7C000378  OR          R0,R0,R0? .
> > PPC1-Bug>as 8000
> > 00008000 7C9602A6  MFSPR       R4,22
> > 00008004 81CC0100  LWZ         R14,$100(R12) ($00000100)
> > 00008008 7C000378  OR          R0,R0,R0? .
> > PPC1-Bug>br 8008
> > BREAKPOINTS
> > 00008008
> > PPC1-Bug>g 4000
> > Effective address: 00004000
> > At Breakpoint
> > IP     =00008008 MSR    =00003040 CR     =00000000 FPSCR  =00000000
> > R0     =00000000 R1     =03F78000 R2     =00000000 R3     =3F0A7D37
> > R4     =3F0A64CE R5     =00000000 R6     =00000000 R7     =00000000
> > R8     =00000000 R9     =00000000 R10    =00000000 R11    =00000000
> > R12    =FEF80000 R13    =0BF88E8D R14    =0BF89008 R15    =00000000
> > R16    =00000000 R17    =00000000 R18    =00000000 R19    =00000000
> > R20    =00000000 R21    =00000000 R22    =00000000 R23    =00000000
> > R24    =00000000 R25    =00000000 R26    =00000000 R27    =00000000
> > R28    =00000000 R29    =00000000 R30    =00000000 R31    =00000000
> > SPR0   =00000000 SPR1   =00000000 SPR8   =00000000 SPR9   =00000000
> > 00008008 7C000378  OR          R0,R0,R0
> > PPC1-Bug>
> >
> >
> > The result:
> > r4 -r3 = 0x1869 , r14 - r13 = 0x17B (379us) . There are 0x1000 asm
> > instruction from 0x4000 to 0x8000 (4096), than the MIPS = 4096/379 =
> 10MIPS
> > . It's impossilbe because the MPU is 200Mhz and bus is 67Mhz. The MIPS
> > should be higher than 200MIPS.
> >
> >   I have made some mistakes? What are they?
> >
> >
> >
> >
> >
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/