Frank Przybylski Frank.Przybylski at vas-gmbh.de
Wed Aug 9 18:40:29 EST 2000

Thank you for your answers. As this is going to be a new hardware I wanted to be
on the secure side. So I'm going to try the patch with the software option on
the very same pins as a fall back option.


Dan Malek wrote:
> Matthew Locke wrote:
> > I have successfully used SPI with ethernet on SCC2 with the microcode
> > patch.
> Better than me :-)!  I left my attempt at microcode patches around
> someplace, but was never able to make them work very well.
> Depending upon your SPI or I2C requirements, you may just be able to
> toggle the pins in software.  This is all I did.
>         -- Dan

Frank Przybylski,VAS GmbH,Gotenstr.6,20097 Hamburg,GERMANY,TEL:+49-40-238568-14
   mailto:Frank.Przybylski at vas-gmbh.de , visit us at http://www.vas-gmbh.de

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

More information about the Linuxppc-embedded mailing list