PPC Cache Flush and Invalidate Routines

Daniel L. Taylor dtaylor at atlp.com
Thu Dec 9 10:58:06 EST 1999


Although we're investigating linuxPPC by working on an MTX
(not quite all ready, yet) which can have either '603s or
'604s, our ultimate target devices are still being selected.
In the interest of longterm embedded solutions, I like
Mr. Thomas' idea of the common entry with "TRT" determined
at system setup, rather than runtime.

Gary Thomas wrote:
> 
> On 08-Dec-99 Grant Erickson wrote:
> >
> > In trying to accomodate the 4xx-based code into the Linux kernel, I've
> > encountered an issue which relates to the cache flushing and invalidation
> > routines in misc.S.
> >
> > Among the 4xx-based processors, the 403s have 16 byte cache lines and the
> > 405s have 32 byte cache lines. Among the 8xx processors, all appear to
> > have 16 byte cache lines. All the rest seem to have 32 byte cache lines.
> >
> > There are several solutions here:
> >
> >  - Use ifdef's as is done at present.
> >
> >  - Check the PVR on entry to each of these routines and "do the right
> >    thing".
> >
> >  - Set global variables ppc_cache_linesize and ppc_cache_lineshift
> >    somewhere in MMU_init or setup_arch which then get loaded in the cache
> >    routines.
> >
> > The first option keeps the code small and fast, but doesn't easily cover
> > the dichotomy between the line sizes in 403 and 405 with a simple
> > CONFIG_4xx.
> >
> > The second option incurs a lot of unnecessary overhead per invocation of
> > the routines and adds a lot of special-case code to each routine.
> >
> > The final option seems the best compromise, increasing kernel memory usage
> > by 8 bytes and adding a little code to load the values of
> > ppc_cache_line{size,shift}. All the overhead is then left to a one time
> > invocation in MMU_init or setup_arch.
> >
> > Thoughts, opinions?
> >
> 
> Perhaps calling these routines via a vector whose value is computed at
> boot/setup time that DTRT (does the right thing).  This would keep the
> overhead down to a single load and still provide the desired functionality.

-- 
Dan Taylor
dtaylor at atlp.com

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-embedded mailing list