[PATCH v2 5/6] keys/trusted_keys: establish PKWM as a trusted source
Srish Srinivasan
ssrish at linux.ibm.com
Tue Jan 6 16:09:42 AEDT 2026
Hi Mimi,
thanks for taking a look.
On 1/2/26 11:14 PM, Mimi Zohar wrote:
> On Wed, 2025-12-17 at 22:55 +0530, Srish Srinivasan wrote:
>> The wrapping key does not exist by default and is generated by the
>> hypervisor as a part of PKWM initialization. This key is then persisted by
>> the hypervisor and is used to wrap trusted keys. These are variable length
>> symmetric keys, which in the case of PowerVM Key Wrapping Module (PKWM) are
>> generated using the kernel RNG. PKWM can be used as a trust source through
>> the following example keyctl command
> -> commands:
Yes, I will fix this.
>
>> keyctl add trusted my_trusted_key "new 32" @u
>>
>> Use the wrap_flags command option to set the secure boot requirement for
>> the wrapping request through the following keyctl commands
>>
>> case1: no secure boot requirement. (default)
>> keyctl usage: keyctl add trusted my_trusted_key "new 32" @u
>> OR
>> keyctl add trusted my_trusted_key "new 32 wrap_flags=0x00" @u
>>
>> case2: secure boot required to in either audit or enforce mode. set bit 0
>> keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x01" @u
>>
>> case3: secure boot required to be in enforce mode. set bit 1
>> keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x02" @u
>>
>> NOTE:
>> -> Setting the secure boot requirement is NOT a must.
>> -> Only either of the secure boot requirement options should be set. Not
>> both.
>> -> All the other bits are requied to be not set.
> -> required
Noted.
Will fix this.
>
>> -> Set the kernel parameter trusted.source=pkwm to choose PKWM as the
>> backend for trusted keys implementation.
>> -> CONFIG_PSERIES_PLPKS must be enabled to build PKWM.
>>
>> Add PKWM, which is a combination of IBM PowerVM and Power LPAR Platform
>> KeyStore, as a new trust source for trusted keys.
>>
>> Signed-off-by: Srish Srinivasan <ssrish at linux.ibm.com>
> Thanks, Srish. Other than fixing the typo and other suggestion above,
> Reviewed-by: Mimi Zohar <zohar at linux.ibm.com>
Thanks for the review Mimi.
Will fix these typos and send out v3.
thanks,
Srish.
More information about the Linuxppc-dev
mailing list