[PATCH] PCI/ASPM: Enable only L0s and L1 for devicetree platforms

[Bjorn Helgaas]

On Wed, Oct 29, 2025 at 06:47:19AM +0100, Christian Zigotzky wrote:
> > On 29 October 2025 at 00:33 am, Bjorn Helgaas <helgaas at kernel.org> wrote:
> > On Mon, Oct 27, 2025 at 06:12:24PM +0100, Christian Zigotzky wrote:
> >> Hi All,
> >> 
> >> I activated CONFIG_PCIEASPM and CONFIG_PCIEASPM_DEFAULT again for the RC3 of
> >> kernel 6.18. Unfortunately my AMD Radeon HD6870 doesn't work with the latest
> >> patches.
> >> 
> >> But that doesn't matter because we disable the above kernel options by
> >> default. We don't need power management for PCI Express because of boot
> >> issues and performance issues.
>  
> > If you have a chance, could you try the patch below on top of
> > v6.18-rc3 with CONFIG_PCIEASPM=y?
> > 
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index 214ed060ca1b..2b6d4e0958aa 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -2524,6 +2524,7 @@ static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
> >  * disable both L0s and L1 for now to be safe.
> >  */
> > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);
> > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, 0x0451, quirk_disable_aspm_l0s_l1);
> > 
> > /*
> >  * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
> 
> Thanks for the patch. 
> 
> I will test it on my FSL Cyrus+ board over the weekend.
> BTW, I also tested my PASemi Nemo board with the RC3 of kernel 6.18
> and with power management for PCI Express enabled. Unfortunately,
> the installed AMD Radeon HD5870 does not work with power management
> for PCI Express enabled either.

Can you share the output of "sudo lspci -vv" and the dmesg log for
this Nemo board that doesn't work with v6.18-rc3?  I would still guess
that Nemo root port has an issue rather than the HD5870.

Hypexed reported that "pasemi,nemo PA6T 0x900102 A-EON Amigaone X1000"
worked fine on 0739473694c4, which was just before v6.18-rc1.  That
system has:

  pci 0000:00:10.0: [1959:a002] type 01 class 0x060400 PCIe Root Port
  pci 0000:00:10.0: PCI bridge to [bus 01]
  pci 0000:01:00.0: [1002:6610] type 00 class 0x030000 PCIe Legacy Endpoint
  pci 0000:01:00.0: ASPM: DT platform, enabling L0s-up L0s-dw L1 ASPM-L1.1 ASPM-L1.2 PCI-PM-L1.1 PCI-PM-L1.2

which is a [1959:a002] PA Semi PWRficient PCI-Express Root Port
leading to [1002:6610] AMD Oland XT [Radeon HD 8670 / R5 340X OEM / R7
250/350/350X OEM], and we tried to enable all ASPM states.

Bjorn