[PATCH v6 4/5] PCI/ERR: Use pcie_aer_is_native() to check for native AER control

[Shuai Xue]

在 2025/10/24 12:03, Lukas Wunner 写道:
> On Fri, Oct 24, 2025 at 11:38:10AM +0800, Shuai Xue wrote:
>> The remaining question is whether it would make more sense to rename
>> pcie_clear_device_status() to pci_clear_device_error_status() and refine
>> its behavior by adding a mask specifically for bits 0 to 3. Here's an
>> example of the proposed change:
> 
> I don't see much value in renaming the function.
> 
> However clearing only bits 0-3 makes sense.  PCIe r5.0 defined bit 6
> as Emergency Power Reduction Detected with type RW1C in 2019.  The
> last time we touched pcie_clear_device_status() was in 2018 with
> ec752f5d54d7 and we've been clearing all bits since forever,
> not foreseeing that new ones with type RW1C might be added later.

Thank you for the detailed explanation and pointing out the history
behind bit 6 and the evolution since PCIe r5.0.

> 
> I suggest defining a new macro in include/uapi/linux/pci_regs.h
> instead of using 0xf, say PCI_EXP_DEVSTA_ERR.  Then you don't
> need the code comment because the code is self-explanatory.
> 

I’ll prepare a patch to implement this fix and submit it shortly.
Thanks again for the guidance!

Thanks.
Shuai