[PATCH v6 5/5] PCI/AER: Clear both AER fatal and non-fatal status

[Shuai Xue]

The DPC driver clears AER fatal status for the port that reported the
error, but not for the downstream device that deteced the error.  The
current recovery code only clears non-fatal AER status, leaving fatal
status bits set in the error device.

Use pci_aer_raw_clear_status() to clear both fatal and non-fatal error
status in the error device, ensuring all AER status bits are properly
cleared after recovery.

Signed-off-by: Shuai Xue <xueshuai at linux.alibaba.com>
---
 drivers/pci/pcie/err.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 097990094b71..28c5ca7d86ce 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -290,7 +290,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	 */
 	if (pcie_aer_is_native(dev)) {
 		pcie_clear_device_status(dev);
-		pci_aer_clear_nonfatal_status(dev);
+		pci_aer_raw_clear_status(dev);
 	}
 
 	pci_walk_bridge(bridge, pci_pm_runtime_put, NULL);
-- 
2.39.3