[PATCH v7 08/17] PCI/AER: Initialize aer_err_info before using it

Bjorn Helgaas helgaas at kernel.org
Wed May 21 07:50:25 AEST 2025


From: Bjorn Helgaas <bhelgaas at google.com>

Previously the struct aer_err_info "e_info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.

Initialize "e_info" at declaration with a designated initializer list,
which initializes the other members to zero.

Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski at kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy at linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/pci/pcie/aer.c | 39 +++++++++++++++++----------------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 520c21ed4ba9..e6693f910a23 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1289,9 +1289,9 @@ static void aer_isr_one_error_type(struct pci_dev *root,
  * @e_src: pointer to an error source
  */
 static void aer_isr_one_error(struct pci_dev *root,
-		struct aer_err_source *e_src)
+			      struct aer_err_source *e_src)
 {
-	struct aer_err_info e_info;
+	u32 status = e_src->status;
 
 	pci_rootport_aer_stats_incr(root, e_src);
 
@@ -1299,30 +1299,25 @@ static void aer_isr_one_error(struct pci_dev *root,
 	 * There is a possibility that both correctable error and
 	 * uncorrectable error being logged. Report correctable error first.
 	 */
-	if (e_src->status & PCI_ERR_ROOT_COR_RCV) {
-		e_info.id = ERR_COR_ID(e_src->id);
-		e_info.severity = AER_CORRECTABLE;
-
-		if (e_src->status & PCI_ERR_ROOT_MULTI_COR_RCV)
-			e_info.multi_error_valid = 1;
-		else
-			e_info.multi_error_valid = 0;
+	if (status & PCI_ERR_ROOT_COR_RCV) {
+		int multi = status & PCI_ERR_ROOT_MULTI_COR_RCV;
+		struct aer_err_info e_info = {
+			.id = ERR_COR_ID(e_src->id),
+			.severity = AER_CORRECTABLE,
+			.multi_error_valid = multi ? 1 : 0,
+		};
 
 		aer_isr_one_error_type(root, &e_info);
 	}
 
-	if (e_src->status & PCI_ERR_ROOT_UNCOR_RCV) {
-		e_info.id = ERR_UNCOR_ID(e_src->id);
-
-		if (e_src->status & PCI_ERR_ROOT_FATAL_RCV)
-			e_info.severity = AER_FATAL;
-		else
-			e_info.severity = AER_NONFATAL;
-
-		if (e_src->status & PCI_ERR_ROOT_MULTI_UNCOR_RCV)
-			e_info.multi_error_valid = 1;
-		else
-			e_info.multi_error_valid = 0;
+	if (status & PCI_ERR_ROOT_UNCOR_RCV) {
+		int fatal = status & PCI_ERR_ROOT_FATAL_RCV;
+		int multi = status & PCI_ERR_ROOT_MULTI_UNCOR_RCV;
+		struct aer_err_info e_info = {
+			.id = ERR_UNCOR_ID(e_src->id),
+			.severity = fatal ? AER_FATAL : AER_NONFATAL,
+			.multi_error_valid = multi ? 1 : 0,
+		};
 
 		aer_isr_one_error_type(root, &e_info);
 	}
-- 
2.43.0



More information about the Linuxppc-dev mailing list