[PATCH v2 10/13] arch, mm: set high_memory in free_area_init()
Alexandre Ghiti
alex at ghiti.fr
Tue May 20 01:54:23 AEST 2025
Hi Mike,
On 5/16/25 19:01, Mike Rapoport wrote:
> Hi Pratyush,
>
> On Fri, May 16, 2025 at 05:28:17PM +0200, Pratyush Yadav wrote:
>> Hi Mike, Andrew,
>>
>> On Thu, Mar 13 2025, Mike Rapoport wrote:
>>
>>> From: "Mike Rapoport (Microsoft)" <rppt at kernel.org>
>>>
>>> high_memory defines upper bound on the directly mapped memory.
>>> This bound is defined by the beginning of ZONE_HIGHMEM when a system has
>>> high memory and by the end of memory otherwise.
>>>
>>> All this is known to generic memory management initialization code that
>>> can set high_memory while initializing core mm structures.
>>>
>>> Add a generic calculation of high_memory to free_area_init() and remove
>>> per-architecture calculation except for the architectures that set and
>>> use high_memory earlier than that.
>>>
>>> Acked-by: Dave Hansen <dave.hansen at linux.intel.com> # x86
>>> Signed-off-by: Mike Rapoport (Microsoft) <rppt at kernel.org>
>>> ---
>>> arch/alpha/mm/init.c | 1 -
>>> arch/arc/mm/init.c | 2 --
>>> arch/arm64/mm/init.c | 2 --
>>> arch/csky/mm/init.c | 1 -
>>> arch/hexagon/mm/init.c | 6 ------
>>> arch/loongarch/kernel/numa.c | 1 -
>>> arch/loongarch/mm/init.c | 2 --
>>> arch/microblaze/mm/init.c | 2 --
>>> arch/mips/mm/init.c | 2 --
>>> arch/nios2/mm/init.c | 6 ------
>>> arch/openrisc/mm/init.c | 2 --
>>> arch/parisc/mm/init.c | 1 -
>>> arch/riscv/mm/init.c | 1 -
>>> arch/s390/mm/init.c | 2 --
>>> arch/sh/mm/init.c | 7 -------
>>> arch/sparc/mm/init_32.c | 1 -
>>> arch/sparc/mm/init_64.c | 2 --
>>> arch/um/kernel/um_arch.c | 1 -
>>> arch/x86/kernel/setup.c | 2 --
>>> arch/x86/mm/init_32.c | 3 ---
>>> arch/x86/mm/numa_32.c | 3 ---
>>> arch/xtensa/mm/init.c | 2 --
>>> mm/memory.c | 8 --------
>>> mm/mm_init.c | 30 ++++++++++++++++++++++++++++++
>>> mm/nommu.c | 2 --
>>> 25 files changed, 30 insertions(+), 62 deletions(-)
>> This patch causes a BUG() when built with CONFIG_DEBUG_VIRTUAL and
>> passing in the cma= commandline parameter:
>>
>> ------------[ cut here ]------------
>> kernel BUG at arch/x86/mm/physaddr.c:23!
>> ception 0x06 IP 10:ffffffff812ebbf8 error 0 cr2 0xffff88903ffff000
>> CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc6+ #231 PREEMPT(undef)
>> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
>> RIP: 0010:__phys_addr+0x58/0x60
>> Code: 01 48 89 c2 48 d3 ea 48 85 d2 75 05 e9 91 52 cf 00 0f 0b 48 3d ff ff ff 1f 77 0f 48 8b 05 20 54 55 01 48 01 d0 e9 78 52 cf 00 <0f> 0b 90 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
>> RSP: 0000:ffffffff82803dd8 EFLAGS: 00010006 ORIG_RAX: 0000000000000000
>> RAX: 000000007fffffff RBX: 00000000ffffffff RCX: 0000000000000000
>> RDX: 000000007fffffff RSI: 0000000280000000 RDI: ffffffffffffffff
>> RBP: ffffffff82803e68 R08: 0000000000000000 R09: 0000000000000000
>> R10: ffffffff83153180 R11: ffffffff82803e48 R12: ffffffff83c9aed0
>> R13: 0000000000000000 R14: 0000001040000000 R15: 0000000000000000
>> FS: 0000000000000000(0000) GS:0000000000000000(0000) knlGS:0000000000000000
>> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> CR2: ffff88903ffff000 CR3: 0000000002838000 CR4: 00000000000000b0
>> Call Trace:
>> <TASK>
>> ? __cma_declare_contiguous_nid+0x6e/0x340
>> ? cma_declare_contiguous_nid+0x33/0x70
>> ? dma_contiguous_reserve_area+0x2f/0x70
>> ? setup_arch+0x6f1/0x870
>> ? start_kernel+0x52/0x4b0
>> ? x86_64_start_reservations+0x29/0x30
>> ? x86_64_start_kernel+0x7c/0x80
>> ? common_startup_64+0x13e/0x141
>>
>> The reason is that __cma_declare_contiguous_nid() does:
>>
>> highmem_start = __pa(high_memory - 1) + 1;
>>
>> If dma_contiguous_reserve_area() (or any other CMA declaration) is
>> called before free_area_init(), high_memory is uninitialized. Without
>> CONFIG_DEBUG_VIRTUAL, it will likely work but use the wrong value for
>> highmem_start.
>>
>> Among the architectures this patch touches, the below call
>> dma_contiguous_reserve_area() _before_ free_area_init():
>>
>> - x86
>> - s390
>> - mips
>> - riscv
>> - xtensa
>> - loongarch
>> - csky
> For most of those this patch didn't really change anything because they
> initialized high_memory in mem_init() which is a part of free_area_init().
> In those cases cma just did
>
> highmem_start = __pa(-1) + 1;
>
> and everyone was happy :)
>
>> The below call it _after_ free_area_init():
>> - arm64
>>
>> And the below don't call it at all:
>> - sparc
>> - nios2
>> - openrisc
>> - hexagon
>> - sh
>> - um
>> - alpha
>>
>> One possible fix would be to move the calls to
>> dma_contiguous_reserve_area() after free_area_init(). On x86, it would
>> look like the diff below. The obvious downside is that moving the call
>> later increases the chances of allocation failure. I'm not sure how much
>> that actually matters, but at least on x86, that means crash kernel and
>> hugetlb reservations go before DMA reservation. Also, adding a patch
>> like that at rc7 is a bit risky.
> I don't think there's a risk of allocation failure, but moving things
> around in setup_arch() is always risky :)
>
>> The other option would be to revert this. I tried a revert, but it isn't
>> trivial. It runs into merge conflicts in pretty much all of the arch
>> files. Maybe reverting patches 11, 12, and 13 as well would make it
>> easier but I didn't try that.
> What I think we can do is to add this to mm/cma.c (not even compile tested)
>
> diff --git a/mm/cma.c b/mm/cma.c
> index 15632939f20a..c04be488b099 100644
> --- a/mm/cma.c
> +++ b/mm/cma.c
> @@ -608,7 +608,10 @@ static int __init __cma_declare_contiguous_nid(phys_addr_t *basep,
> * complain. Find the boundary by adding one to the last valid
> * address.
> */
> - highmem_start = __pa(high_memory - 1) + 1;
> + if (IS_ENABLED(CONFIG_HIGHMEM))
> + highmem_start = __pa(high_memory - 1) + 1;
> + else
> + highmem_start = memblock_end_of_DRAM();
> pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
> __func__, &size, &base, &limit, &alignment);
I encountered the same error as Pratyush and the above diff fixes it: do
you plan on sending this fix for 6.15?
If so, you can add:
Tested-by: Alexandre Ghiti <alexghiti at rivosinc.com>
If not, let me know how you want to proceed :)
Thanks,
Alex
>
> so that highmem_start in __cma_declare_contiguous_nid() will be always
> correct for !HIGHMEM configs and then restore setting of highmem_start in
> mips::paging_init() as mips is the only architecture that actually set
> high_memory before free_area_init() before this patch.
>
> (for 32 bit configs of x86 there alrady a fixup d893aca973c3 ("x86/mm: restore
> early initialization of high_memory for 32-bits"))
>
More information about the Linuxppc-dev
mailing list