[PATCH v2 6/6] powerpc/pseries: Add papr-platform-dump character driver for dump retrieval
Haren Myneni
haren at linux.ibm.com
Fri Feb 7 05:34:42 AEDT 2025
On Thu, 2025-02-06 at 16:32 +0100, Michal Suchánek wrote:
> On Thu, Feb 06, 2025 at 07:28:14AM -0800, Haren Myneni wrote:
> > On Thu, 2025-02-06 at 10:18 +0100, Michal Suchánek wrote:
> > > On Wed, Feb 05, 2025 at 11:51:19PM -0800, Haren Myneni wrote:
> > > > On Wed, 2025-02-05 at 15:28 +0100, Michal Suchánek wrote:
> > > > > Hello,
> > > > >
> > > > > thanks for working on this!
> > > > >
> > > > > I see in thes version you ended up reusing the existing RTAS
> > > > > call
> > > > > code
> > > > > which looks better.
> > > > >
> > > > > From the past discussion it sounds like the get-indices call
> > > > > can
> > > > > list
> > > > > the available dumps, and I do not see this connection
> > > > > documented.
> > > > >
> > > > > Also the part about it not being used in practice by the
> > > > > service
> > > > > that
> > > > > retrieves the dumps because it gets a message from the
> > > > > hypervisor
> > > > > with
> > > > > the dump id when a dump is available.
> > > >
> > > > ibm,get-indices is used to obtain data based on indicator and
> > > > sensor,
> > > > not related to platform dump. ibm,platform-dump is used only on
> > > > non-HMC
> > > > based systems and BMC interface initiates manually to save the
> > > > dump
> > > > on
> > > > tne partition. Sorry in case caused confusion in the previous
> > > > discussion.
> > > >
> > > > > On Fri, Jan 10, 2025 at 04:30:08PM -0800, Haren Myneni wrote:
> > > > > > ibm,platform-dump RTAS call in combination with writable
> > > > > > mapping
> > > > > > /dev/mem is issued to collect platform dump from the
> > > > > > hypervisor
> > > > > > and may need multiple calls to get the complete dump. The
> > > > > > current
> > > > > > implementation uses rtas_platform_dump() API provided by
> > > > > > librtas
> > > > > > library to issue these RTAS calls. But /dev/mem access by
> > > > > > the
> > > > > > user space is prohibited under system lockdown.
> > > > > >
> > > > > > The solution should be to restrict access to RTAS function
> > > > > > in
> > > > > > user
> > > > > > space and provide kernel interfaces to collect dump. This
> > > > > > patch
> > > > > > adds papr-platform-dump character driver and expose
> > > > > > standard
> > > > > > interfaces such as open / ioctl/ read to user space in ways
> > > > > > that
> > > > > > are compatible with lockdown.
> > > > > >
> > > > > > PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to
> > > > > > obtain
> > > > > > the complete dump:
> > > > > > - Each dump will be identified by ID called dump tag.
> > > > > > - A sequence of RTAS calls have to be issued until retrieve
> > > > > > the
> > > > > > complete dump. The hypervisor expects the first RTAS call
> > > > > > with
> > > > > > the sequence 0 and the subsequent calls with the sequence
> > > > > > number returned from the previous calls.
> > > > > > - The hypervisor returns "dump complete" status once the
> > > > > > complete
> > > > > > dump is retrieved. But expects one more RTAS call from
> > > > > > the
> > > > > > partition with the NULL buffer to invalidate dump which
> > > > > > means
> > > > > > the dump will be removed in the hypervisor.
> > > > > > - Sequence of calls are allowed with different dump IDs at
> > > > > > the
> > > > > > same time but not with the same dump ID.
> > > > > >
> > > > > > Expose these interfaces to user space with a /dev/papr-
> > > > > > platform-
> > > > > > dump
> > > > > > character device using the following programming model:
> > > > > >
> > > > > > int devfd = open("/dev/papr-platform-dump", O_RDONLY);
> > > > > > int fd =
> > > > > > ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE,
> > > > > > &dump_id)
> > > > > > - Restrict user space to access with the same dump ID.
> > > > > > Typically we do not expect user space requests
> > > > > > the
> > > > > > dump
> > > > > > again for the same dump ID.
> > > > > > char *buf = malloc(size);
> > > > > > length = read(fd, buf, size);
> > > > > > - size should be minimum 1K based on PAPR and <=
> > > > > > 4K
> > > > > > based
> > > > > > on RTAS work area size. It will be restrict to
> > > > > > RTAS
> > > > > > work
> > > > > > area size. Using 4K work area based on the
> > > > > > current
> > > > > > implementation in librtas library
> > > > > > - Each read call issue RTAS call to get the data
> > > > > > based
> > > > > > on
> > > > > > the size requirement and returns bytes returned
> > > > > > from
> > > > > > the
> > > > > > hypervisor
> > > > > > - If the previous call returns dump complete
> > > > > > status,
> > > > > > the
> > > > > > next read returns 0 like EOF.
> > > > > > ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
> > > > > > - RTAS call with NULL buffer to invalidates the dump.
> > > > > >
> > > > > > The read API should use the file descriptor obtained from
> > > > > > ioctl
> > > > > > based on dump ID so that gets dump contents for the
> > > > > > corresponding
> > > > > > dump ID. Implemented support in librtas
> > > > > > (rtas_platform_dump())
> > > > > > for
> > > > > > this new ABI to support system lockdown.
> > > > > >
> > > > > > Signed-off-by: Haren Myneni <haren at linux.ibm.com>
> > > > > > ---
> > > > > > .../include/uapi/asm/papr-platform-dump.h | 15 +
> > > > > > arch/powerpc/platforms/pseries/Makefile | 1 +
> > > > > > .../platforms/pseries/papr-platform-dump.c | 408
> > > > > > ++++++++++++++++++
> > > > > > 3 files changed, 424 insertions(+)
> > > > > > create mode 100644 arch/powerpc/include/uapi/asm/papr-
> > > > > > platform-
> > > > > > dump.h
> > > > > > create mode 100644 arch/powerpc/platforms/pseries/papr-
> > > > > > platform-
> > > > > > dump.c
> > > > > >
> > > > > > diff --git a/arch/powerpc/include/uapi/asm/papr-platform-
> > > > > > dump.h
> > > > > > b/arch/powerpc/include/uapi/asm/papr-platform-dump.h
> > > > > > new file mode 100644
> > > > > > index 000000000000..3a0f152e3ce8
> > > > > > --- /dev/null
> > > > > > +++ b/arch/powerpc/include/uapi/asm/papr-platform-dump.h
> > > > > > @@ -0,0 +1,15 @@
> > > > > > +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-
> > > > > > note */
> > > > > > +#ifndef _UAPI_PAPR_PLATFORM_DUMP_H_
> > > > > > +#define _UAPI_PAPR_PLATFORM_DUMP_H_
> > > > > > +
> > > > > > +#include <asm/ioctl.h>
> > > > > > +#include <asm/papr-miscdev.h>
> > > > > > +
> > > > > > +/*
> > > > > > + * ioctl for /dev/papr-platform-dump. Returns a VPD handle
> > > > > > fd
> > > > > > corresponding to
> > > > > > + * the location code.
> > > > > > + */
> > > > > > +#define PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE
> > > > > > _IOW(PAPR_MISCDEV_IOC_ID, 6, __u64)
> > > > > > +#define
> > > > > > PAPR_PLATFORM_DUMP_IOC_INVALIDATE _IOW(PAPR_MISCDEV_IOC_
> > > > > > ID,
> > > > > > 7,
> > > > > > __u64)
> > > > > > +
> > > > > > +#endif /* _UAPI_PAPR_PLATFORM_DUMP_H_ */
> > > > > > diff --git a/arch/powerpc/platforms/pseries/Makefile
> > > > > > b/arch/powerpc/platforms/pseries/Makefile
> > > > > > index e1db61877bb9..c82c94e0a73c 100644
> > > > > > --- a/arch/powerpc/platforms/pseries/Makefile
> > > > > > +++ b/arch/powerpc/platforms/pseries/Makefile
> > > > > > @@ -4,6 +4,7 @@ ccflags-$(CONFIG_PPC_PSERIES_DEBUG) +=
> > > > > > -DDEBUG
> > > > > > obj-y := lpar.o hvCall.o nvram.o
> > > > > > reconfig.o \
> > > > > > of_helpers.o rtas-work-area.o papr-
> > > > > > sysparm.o
> > > > > > \
> > > > > > papr-rtas-common.o papr-vpd.o papr-
> > > > > > indices.o
> > > > > > \
> > > > > > + papr-platform-dump.o \
> > > > > > setup.o iommu.o event_sources.o
> > > > > > ras.o \
> > > > > > firmware.o power.o dlpar.o
> > > > > > mobility.o rng.o
> > > > > > \
> > > > > > pci.o pci_dlpar.o eeh_pseries.o
> > > > > > msi.o \
> > > > > > diff --git a/arch/powerpc/platforms/pseries/papr-platform-
> > > > > > dump.c
> > > > > > b/arch/powerpc/platforms/pseries/papr-platform-dump.c
> > > > > > new file mode 100644
> > > > > > index 000000000000..13a418d7c37e
> > > > > > --- /dev/null
> > > > > > +++ b/arch/powerpc/platforms/pseries/papr-platform-dump.c
> > > > > > @@ -0,0 +1,408 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > > > +
> > > > > > +#define pr_fmt(fmt) "papr-platform-dump: " fmt
> > > > > > +
> > > > > > +#include <linux/anon_inodes.h>
> > > > > > +#include <linux/file.h>
> > > > > > +#include <linux/fs.h>
> > > > > > +#include <linux/init.h>
> > > > > > +#include <linux/kernel.h>
> > > > > > +#include <linux/miscdevice.h>
> > > > > > +#include <asm/machdep.h>
> > > > > > +#include <asm/rtas-work-area.h>
> > > > > > +#include <asm/rtas.h>
> > > > > > +#include <uapi/asm/papr-platform-dump.h>
> > > > > > +
> > > > > > +/*
> > > > > > + * Function-specific return values for ibm,platform-dump,
> > > > > > derived
> > > > > > from
> > > > > > + * PAPR+ v2.13 7.3.3.4.1 "ibm,platform-dump RTAS Call".
> > > > > > + */
> > > > > > +#define RTAS_IBM_PLATFORM_DUMP_COMPLETE 0 /*
> > > > > > Complete
> > > > > > dump retrieved. */
> > > > > > +#define RTAS_IBM_PLATFORM_DUMP_CONTINUE 1 /*
> > > > > > Continue
> > > > > > dump */
> > > > > > +#define RTAS_NOT_AUTHORIZED -9002 /* Not
> > > > > > Authorized
> > > > > > */
> > > > > > +
> > > > > > +#define RTAS_IBM_PLATFORM_DUMP_START 2 /* Linux
> > > > > > status
> > > > > > to start dump */
> > > > > > +
> > > > > > +/**
> > > > > > + * struct ibm_platform_dump_params - Parameters (in and
> > > > > > out)
> > > > > > for
> > > > > > +
> > > > > > * ibm,platform
> > > > > > -
> > > > > > dump
> > > > > > + * @work_area: In: work area buffer for
> > > > > > results.
> > > > > > + * @buf_length: In: work area buffer length in
> > > > > > bytes
> > > > > > + * @dump_tag_hi: In: Most-significant 32 bits of a
> > > > > > Dump_Tag
> > > > > > representing
> > > > > > + * an id of the dump being processed.
> > > > > > + * @dump_tag_lo: In: Least-significant 32 bits of a
> > > > > > Dump_Tag
> > > > > > representing
> > > > > > + * an id of the dump being processed.
> > > > > > + * @sequence_hi: In: Sequence number in most-
> > > > > > significant
> > > > > > 32
> > > > > > bits.
> > > > > > + * Out: Next sequence number in most-
> > > > > > significant 32 bits.
> > > > > > + * @sequence_lo: In: Sequence number in Least-
> > > > > > significant 32
> > > > > > bits
> > > > > > + * Out: Next sequence number in
> > > > > > Least-
> > > > > > significant 32 bits.
> > > > > > + * @bytes_ret_hi: Out: Bytes written in most-significant
> > > > > > 32 bits.
> > > > > > + * @bytes_ret_lo: Out: Bytes written in Least-
> > > > > > significant
> > > > > > 32
> > > > > > bits.
> > > > > > + * @status: Out: RTAS call status.
> > > > > > + * @list: Maintain the list of dumps are in
> > > > > > progress. Can
> > > > > > + * retrieve multiple dumps with
> > > > > > different
> > > > > > dump IDs at
> > > > > > + * the same time but not with the
> > > > > > same
> > > > > > dump
> > > > > > ID. This list
> > > > > > + * is used to determine whether the
> > > > > > dump
> > > > > > for
> > > > > > the same ID
> > > > > > + * is in progress.
> > > > > > + */
> > > > > > +struct ibm_platform_dump_params {
> > > > > > + struct rtas_work_area *work_area;
> > > > > > + u32 buf_length;
> > > > > > + u32 dump_tag_hi;
> > > > > > + u32 dump_tag_lo;
> > > > > > + u32 sequence_hi;
> > > > > > + u32 sequence_lo;
> > > > > > + u32 bytes_ret_hi;
> > > > > > + u32 bytes_ret_lo;
> > > > > > + s32 status;
> > > > > > + struct list_head list;
> > > > > > +};
> > > > > > +
> > > > > > +/*
> > > > > > + * Multiple dumps with different dump IDs can be retrieved
> > > > > > at
> > > > > > the
> > > > > > same
> > > > > > + * time, but not with dame dump ID.
> > > > > > platform_dump_list_mutex
> > > > > > and
> > > > > > + * platform_dump_list are used to prevent this behavior.
> > > > > > + */
> > > > > > +static DEFINE_MUTEX(platform_dump_list_mutex);
> > > > > > +static LIST_HEAD(platform_dump_list);
> > > > > > +
> > > > > > +/**
> > > > > > + * rtas_ibm_platform_dump() - Call ibm,platform-dump to
> > > > > > fill a
> > > > > > work area
> > > > > > + * buffer.
> > > > > > + * @params: See &struct ibm_platform_dump_params.
> > > > > > + * @buf_addr: Address of dump buffer (work_area)
> > > > > > + * @buf_length: Length of the buffer in bytes (min. 1024)
> > > > > > + *
> > > > > > + * Calls ibm,platform-dump until it errors or successfully
> > > > > > deposits data
> > > > > > + * into the supplied work area. Handles RTAS retry
> > > > > > statuses.
> > > > > > Maps
> > > > > > RTAS
> > > > > > + * error statuses to reasonable errno values.
> > > > > > + *
> > > > > > + * Can request multiple dumps with different dump IDs at
> > > > > > the
> > > > > > same
> > > > > > time,
> > > > > > + * but not with the same dump ID which is prevented with
> > > > > > the
> > > > > > check
> > > > > > in
> > > > > > + * the ioctl code (papr_platform_dump_create_handle()).
> > > > > > + *
> > > > > > + * The caller should inspect @params.status to determine
> > > > > > whether
> > > > > > more
> > > > > > + * calls are needed to complete the sequence.
> > > > > > + *
> > > > > > + * Context: May sleep.
> > > > > > + * Return: -ve on error, 0 for dump complete and 1 for
> > > > > > continue
> > > > > > dump
> > > > > > + */
> > > > > > +static int rtas_ibm_platform_dump(struct
> > > > > > ibm_platform_dump_params
> > > > > > *params,
> > > > > > + phys_addr_t buf_addr, u32
> > > > > > buf_length)
> > > > > > +{
> > > > > > + u32 rets[4];
> > > > > > + s32 fwrc;
> > > > > > + int ret = 0;
> > > > > > +
> > > > > > + do {
> > > > > > + fwrc =
> > > > > > rtas_call(rtas_function_token(RTAS_FN_IBM_PLATFORM_DUMP),
> > > > > > + 6, 5,
> > > > > > + rets,
> > > > > > + params->dump_tag_hi,
> > > > > > + params->dump_tag_lo,
> > > > > > + params->sequence_hi,
> > > > > > + params->sequence_lo,
> > > > > > + buf_addr,
> > > > > > + buf_length);
> > > > > > + } while (rtas_busy_delay(fwrc));
> > > > > > +
> > > > > > + switch (fwrc) {
> > > > > > + case RTAS_HARDWARE_ERROR:
> > > > > > + ret = -EIO;
> > > > > > + break;
> > > > > > + case RTAS_NOT_AUTHORIZED:
> > > > > > + ret = -EPERM;
> > > > > > + break;
> > > > > > + case RTAS_IBM_PLATFORM_DUMP_CONTINUE:
> > > > > > + case RTAS_IBM_PLATFORM_DUMP_COMPLETE:
> > > > > > + params->sequence_hi = rets[0];
> > > > > > + params->sequence_lo = rets[1];
> > > > > > + params->bytes_ret_hi = rets[2];
> > > > > > + params->bytes_ret_lo = rets[3];
> > > > > > + break;
> > > > > > + default:
> > > > > > + ret = -EIO;
> > > > > > + pr_err_ratelimited("unexpected ibm,platform-
> > > > > > dump status
> > > > > > %d\n",
> > > > > > + fwrc);
> > > > > > + break;
> > > > > > + }
> > > > > > +
> > > > > > + params->status = fwrc;
> > > > > > + return ret;
> > > > > > +}
> > > > > > +
> > > > > > +/*
> > > > > > + * Platform dump is used with multiple RTAS calls to
> > > > > > retrieve
> > > > > > the
> > > > > > + * complete dump for the provided dump ID. Once the
> > > > > > complete
> > > > > > dump
> > > > > > is
> > > > > > + * retrieved, the hypervisor returns dump complete status
> > > > > > (0)
> > > > > > for
> > > > > > the
> > > > > > + * last RTAS call and expects the caller issues one more
> > > > > > call
> > > > > > with
> > > > > > + * NULL buffer to invalidate the dump so that the
> > > > > > hypervisor
> > > > > > can
> > > > > > remove
> > > > > > + * the dump.
> > > > > > + *
> > > > > > + * After the specific dump is invalidated in the
> > > > > > hypervisor,
> > > > > > expect the
> > > > > > + * dump complete status for the new sequence - the user
> > > > > > space
> > > > > > initiates
> > > > > > + * new request for the same dump ID.
> > > > > > + */
> > > > > > +static ssize_t papr_platform_dump_handle_read(struct file
> > > > > > *file,
> > > > > > + char __user *buf, size_t size, loff_t *off)
> > > > > > +{
> > > > > > + struct ibm_platform_dump_params *params = file-
> > > > > > > private_data;
> > > > > > + u64 total_bytes;
> > > > > > + s32 fwrc;
> > > > > > +
> > > > > > + /*
> > > > > > + * Dump already completed with the previous read calls.
> > > > > > + * In case if the user space issues further reads,
> > > > > > returns
> > > > > > + * -EINVAL.
> > > > > > + */
> > > > > > + if (!params->buf_length) {
> > > > > > + pr_warn_once("Platform dump completed for dump
> > > > > > ID
> > > > > > %llu\n",
> > > > > > + (u64) (((u64)params->dump_tag_hi << 32)
> > > > > > + params->dump_tag_lo));
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > +
> > > > > > + /*
> > > > > > + * The hypervisor returns status 0 if no more data
> > > > > > available to
> > > > > > + * download. The dump will be invalidated with ioctl
> > > > > > (see
> > > > > > below).
> > > > > > + */
> > > > > > + if (params->status == RTAS_IBM_PLATFORM_DUMP_COMPLETE)
> > > > > > {
> > > > > > + params->buf_length = 0;
> > > > > > + /*
> > > > > > + * Returns 0 to the user space so that user
> > > > > > + * space read stops.
> > > > > > + */
> > > > > > + return 0;
> > > > > > + }
> > > > > > +
> > > > > > + if (size < SZ_1K) {
> > > > > > + pr_err_once("Buffer length should be minimum
> > > > > > 1024
> > > > > > bytes\n");
> > > > > > + return -EINVAL;
> > > > > > + } else if (size > params->buf_length) {
> > > > > > + /*
> > > > > > + * Allocate 4K work area. So if the user
> > > > > > requests > 4K,
> > > > > > + * resize the buffer length.
> > > > > > + */
> > > > > > + size = params->buf_length;
> > > > > > + }
> > > > > > +
> > > > > > + fwrc = rtas_ibm_platform_dump(params,
> > > > > > + rtas_work_area_phys(params->work_area),
> > > > > > + size);
> > > > > > + if (fwrc < 0)
> > > > > > + return fwrc;
> > > > > > +
> > > > > > + total_bytes = (u64) (((u64)params->bytes_ret_hi << 32)
> > > > > > + params->bytes_ret_lo);
> > > > > > +
> > > > > > + /*
> > > > > > + * Kernel or firmware bug, do not continue.
> > > > > > + */
> > > > > > + if (WARN(total_bytes > size, "possible write beyond end
> > > > > > of work
> > > > > > area"))
> > > > > > + return -EFAULT;
> > > > > > +
> > > > > > + if (copy_to_user(buf, rtas_work_area_raw_buf(params-
> > > > > > > work_area),
> > > > > > + total_bytes))
> > > > > > + return -EFAULT;
> > > > > > +
> > > > > > + return total_bytes;
> > > > > > +}
> > > > > > +
> > > > > > +static int papr_platform_dump_handle_release(struct inode
> > > > > > *inode,
> > > > > > + struct file *file)
> > > > > > +{
> > > > > > + struct ibm_platform_dump_params *params = file-
> > > > > > > private_data;
> > > > > > +
> > > > > > + if (params->work_area)
> > > > > > + rtas_work_area_free(params->work_area);
> > > > > > +
> > > > > > + mutex_lock(&platform_dump_list_mutex);
> > > > > > + list_del(¶ms->list);
> > > > > > + mutex_unlock(&platform_dump_list_mutex);
> > > > > > +
> > > > > > + kfree(params);
> > > > > > + file->private_data = NULL;
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +/*
> > > > > > + * This ioctl is used to invalidate the dump assuming the
> > > > > > user
> > > > > > space
> > > > > > + * issue this ioctl after obtain the complete dump.
> > > > > > + * Issue the last RTAS call with NULL buffer to invalidate
> > > > > > the
> > > > > > dump
> > > > > > + * which means dump will be freed in the hypervisor.
> > > > > > + */
> > > > > > +static long papr_platform_dump_invalidate_ioctl(struct
> > > > > > file
> > > > > > *file,
> > > > > > + unsigned int ioctl, unsigned
> > > > > > long arg)
> > > > > > +{
> > > > > > + struct ibm_platform_dump_params *params;
> > > > > > + u64 __user *argp = (void __user *)arg;
> > > > > > + u64 param_dump_tag, dump_tag;
> > > > > > +
> > > > > > + if (ioctl != PAPR_PLATFORM_DUMP_IOC_INVALIDATE)
> > > > > > + return -ENOIOCTLCMD;
> > > > > > +
> > > > > > + if (get_user(dump_tag, argp))
> > > > > > + return -EFAULT;
> > > > > > +
> > > > > > + /*
> > > > > > + * private_data is freeded during release(), so should
> > > > > > not
> > > > > freed?
> > > > > > + * happen.
> > > > > > + */
> > > > > > + if (!file->private_data) {
> > > > > > + pr_err("No valid FD to invalidate dump for the
> > > > > > ID(%llu)\n",
> > > > > > + dump_tag);
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > +
> > > > > > + params = file->private_data;
> > > > > > + param_dump_tag = (u64) (((u64)params->dump_tag_hi <<
> > > > > > 32) |
> > > > > > + params->dump_tag_lo);
> > > > > > + if (dump_tag != param_dump_tag) {
> > > > > > + pr_err("Invalid dump ID(%llu) to invalidate
> > > > > > dump\n",
> > > > > > + dump_tag);
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > +
> > > > > > + if (params->status != RTAS_IBM_PLATFORM_DUMP_COMPLETE)
> > > > > > + pr_warn("Platform dump is not complete, but
> > > > > > requested "
> > > > > > + "to invalidate dump for ID(%llu)\n",
> > > > > > + dump_tag);
> > > > >
> > > > > Not sure if something should be done here or if relying on
> > > > > translation
> > > > > of the error from the RTAS call is advisable.
> > > >
> > > > This check just diplays message in case if the user initiated
> > > > to
> > > > invalidate the dump without saving it completely. Then
> > > > invalidates
> > > > the
> > > > dump with RTAS call and retuns the RTAS return value.
> > > >
> > > > As mentioned above, platform-dump is available only on non-HMC
> > > > based
> > > > systems. So invoke the collection of dump by BMC based
> > > > interface,
> > > > not
> > > > widely used. I can remove this check if preferred.
> > >
> > > From the previous discussion it sounds like trying to invalidate
> > > the
> > > dump without first reading it in full is an error.
> >
> > Thanks for your suggestions.
> >
> > Yes, it was doing as part of read() calls. But explicit ioctl to
> > invalidate here. I was thinking like user space removing FD without
> > reading or writing operation.
>
> And is it possible to invalidate the dump without reading it fully
> first?
>
> If not then there is no point trying to do the call that is known to
> fail anyway.
Generally not possible if uses librtas API rtas_platform_dump() which
reads the dump completely and then the application calls this API
explicitly to invalidate the dump (with buffer NULL - as doing in the
current implementation). The current use case is extract_platdump
command (ppc64-diag package)
extract_platdump() { /* we are not chamging this implementation */
status = rtas_platform_dump() - initial call
while !dump_complete {
status = rtas_platform_dump()
if (status < 0) failure
if (status == 0) dump_complete = 1
}
status = rtas_platform_dump() - to invalidate dump by passing buffer =
NULL
We should not expect using any command other than extract_platdump
since the use case of collecting platform dump is narrow and is only on
non-hmc based systems.
Hence added warning message if the dump is not completely read and
invalidate the dump like removing file by mistake.
But I like your suggestion of returning an error (-EPERM) if not saved
the dump completely.
Thanks
Haren
>
> Thanks
>
> Michal
>
> > > The state to detect this error is tracked which makes it possible
> > > to
> > > produce this warning.
> > >
> > > Then it's also possible to handle the error without roundtrip to
> > > the
> > > hypervisor.
> >
> > Do you prefer return en error without invalidating if the dump is
> > not
> > read completely? Sure we can.
> >
> > if (params->status != RTAS_IBM_PLATFORM_DUMP_COMPLETE) {
> > pr_err("Platform dump is not complete, but requested "
> > "to invalidate dump for ID(%llu)\n",
> > dump_tag);
> > return -EPERM;
> > }
> >
> > Thanks
> > Haren
> >
> > > Thanks
> > >
> > > Michal
> > >
> > > > Thanks
> > > > Haren
> > > >
> > > > > Thanks
> > > > >
> > > > > Michal
More information about the Linuxppc-dev
mailing list