[PATCH] powerpc/powermac: replace KERN_INFO calls with pr_info
Denis Kirjanov
kirjanov at gmail.com
Sun Feb 2 23:28:03 AEDT 2025
pr_info makes code cleaner and simplifies syntax
Signed-off-by: Denis Kirjanov <kirjanov at gmail.com>
---
arch/powerpc/platforms/powermac/feature.c | 8 ++++----
arch/powerpc/platforms/powermac/low_i2c.c | 12 ++++++------
arch/powerpc/platforms/powermac/pci.c | 12 ++++++------
arch/powerpc/platforms/powermac/pic.c | 6 +++---
arch/powerpc/platforms/powermac/setup.c | 2 +-
arch/powerpc/platforms/powermac/smp.c | 12 ++++++------
6 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 6365cea27abc..d3bcfe590384 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2527,7 +2527,7 @@ static int __init probe_motherboard(void)
pmac_mb.board_flags |= PMAC_MB_MOBILE;
- printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+ pr_info("PowerMac motherboard: %s\n", pmac_mb.model_name);
done:
of_node_put(dt);
return ret;
@@ -2574,11 +2574,11 @@ static void __init probe_uninorth(void)
}
}
- printk(KERN_INFO "Found %s memory controller & host bridge"
+ pr_info("Found %s memory controller & host bridge"
" @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
uninorth_maj == 4 ? "U4" : "UniNorth",
(unsigned int)res.start, uninorth_rev);
- printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
+ pr_info("Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
*/
@@ -2664,7 +2664,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
revp = of_get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
- printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+ pr_info("Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
macio_names[type], macio_chips[i].rev, macio_chips[i].base);
return;
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index c097d591670e..fe38e6e0f8db 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -554,7 +554,7 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
"keywest i2c", host))
host->irq = 0;
- printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %pOF\n",
+ pr_info("KeyWest i2c @0x%08x irq %d %pOF\n",
*addrp, host->irq, np);
return host;
@@ -588,7 +588,7 @@ static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
bus->flags = pmac_i2c_multibus;
list_add(&bus->link, &pmac_i2c_busses);
- printk(KERN_INFO " channel %d bus %s\n", channel,
+ pr_info(" channel %d bus %s\n", channel,
(controller == busnode) ? "<multibus>" : busnode->full_name);
}
@@ -793,7 +793,7 @@ static void __init pmu_i2c_probe(void)
if (busnode == NULL)
return;
- printk(KERN_INFO "PMU i2c %pOF\n", busnode);
+ pr_info("PMU i2c %pOF\n", busnode);
/*
* We add bus 1 and 2 only for now, bus 0 is "special"
@@ -817,7 +817,7 @@ static void __init pmu_i2c_probe(void)
bus->flags = pmac_i2c_multibus;
list_add(&bus->link, &pmac_i2c_busses);
- printk(KERN_INFO " channel %d bus <multibus>\n", channel);
+ pr_info(" channel %d bus <multibus>\n", channel);
}
}
@@ -909,7 +909,7 @@ static void __init smu_i2c_probe(void)
if (controller == NULL)
return;
- printk(KERN_INFO "SMU i2c %pOF\n", controller);
+ pr_info("SMU i2c %pOF\n", controller);
/* Look for childs, note that they might not be of the right
* type as older device trees mix i2c busses and other things
@@ -943,7 +943,7 @@ static void __init smu_i2c_probe(void)
bus->flags = 0;
list_add(&bus->link, &pmac_i2c_busses);
- printk(KERN_INFO " channel %x bus %pOF\n",
+ pr_info(" channel %x bus %pOF\n",
bus->channel, busnode);
}
}
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d71359b5331c..5404189866af 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -482,7 +482,7 @@ static void __init init_bandit(struct pci_controller *bp)
magic |= BANDIT_COHERENT;
udelay(2);
out_le32(bp->cfg_data, magic);
- printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+ pr_info("Cache coherency enabled for bandit/PSX\n");
}
/*
@@ -814,7 +814,7 @@ static int __init pmac_add_bridge(struct device_node *dev)
disp_name = "U4-PCIE";
primary = 0;
}
- printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:"
+ pr_info("Found %s PCI host bridge. Firmware bus number:"
" %d->%d\n", disp_name, hose->first_busno, hose->last_busno);
#endif /* CONFIG_PPC64 */
@@ -835,7 +835,7 @@ static int __init pmac_add_bridge(struct device_node *dev)
disp_name = "Chaos";
primary = 0;
}
- printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. "
+ pr_info("Found %s PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
disp_name, (unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
@@ -966,7 +966,7 @@ static bool pmac_pci_enable_device_hook(struct pci_dev *dev)
if (dev->vendor == PCI_VENDOR_ID_APPLE
&& dev->class == PCI_CLASS_SERIAL_USB_OHCI
&& !node) {
- printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+ pr_info("Apple USB OHCI %s disabled by firmware\n",
pci_name(dev));
return false;
}
@@ -1122,7 +1122,7 @@ static void pmac_pci_fixup_pciata(struct pci_dev *dev)
good:
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 5) != 5) {
- printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n",
+ pr_info("PCI: %s Forcing PCI IDE into native mode\n",
pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
@@ -1220,7 +1220,7 @@ static void fixup_u4_pcie(struct pci_dev* dev)
return;
/* Print things out */
- printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
+ pr_info("PCI: Fixup U4 PCIe bridge range: %pR\n", region);
/* Fixup bridge config space. We know it's a Mac, resource aren't
* offset so let's just blast them as-is. We also know that they
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 2202bf77c7a3..c9a5326aae41 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -345,7 +345,7 @@ static void __init pmac_pic_probe_oldstyle(void)
(addr + 0x10);
of_node_put(master);
- printk(KERN_INFO "irq: Found primary Apple PIC %pOF for %d irqs\n",
+ pr_info("irq: Found primary Apple PIC %pOF for %d irqs\n",
master, max_real_irqs);
/* Map interrupts of cascaded controller */
@@ -359,7 +359,7 @@ static void __init pmac_pic_probe_oldstyle(void)
(addr + 0x10);
pmac_irq_cascade = irq_of_parse_and_map(slave, 0);
- printk(KERN_INFO "irq: Found slave Apple PIC %pOF for %d irqs"
+ pr_info("irq: Found slave Apple PIC %pOF for %d irqs"
" cascade: %d\n", slave,
max_irqs - max_real_irqs, pmac_irq_cascade);
}
@@ -376,7 +376,7 @@ static void __init pmac_pic_probe_oldstyle(void)
pr_err("Failed to register cascade interrupt\n");
}
- printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
+ pr_info("irq: System has %d possible interrupts\n", max_irqs);
#ifdef CONFIG_XMON
i = irq_create_mapping(NULL, 20);
if (request_irq(i, xmon_irq, IRQF_NO_THREAD, "NMI - XMON", NULL))
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 6de1cd5d8a58..cb7d9f1db7fe 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -220,7 +220,7 @@ static void __init ohare_init(void)
else
sysctrl_regs[4] |= 0x04000000;
if(has_l2cache)
- printk(KERN_INFO "Level 2 cache enabled\n");
+ pr_info("Level 2 cache enabled\n");
}
}
}
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index ffd5bc96b92c..49843b6e88b3 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -602,7 +602,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
" sync, fallback to software sync !\n");
goto no_i2c_sync;
}
- printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
+ pr_info("Processor timebase sync using %s i2c clock\n",
name);
return;
}
@@ -702,7 +702,7 @@ static void __init smp_core99_setup(int ncpus)
if (cpus &&
of_property_read_bool(cpus, "platform-cpu-timebase")) {
pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
- printk(KERN_INFO "Processor timebase sync using"
+ pr_info("Processor timebase sync using"
" platform function\n");
}
of_node_put(cpus);
@@ -724,7 +724,7 @@ static void __init smp_core99_setup(int ncpus)
of_node_put(cpu);
}
pmac_tb_freeze = smp_core99_gpio_tb_freeze;
- printk(KERN_INFO "Processor timebase sync using"
+ pr_info("Processor timebase sync using"
" GPIO 0x%02x\n", core99_tb_gpio);
}
@@ -734,7 +734,7 @@ static void __init smp_core99_setup(int ncpus)
if (pmac_tb_freeze == NULL) {
smp_ops->give_timebase = smp_generic_give_timebase;
smp_ops->take_timebase = smp_generic_take_timebase;
- printk(KERN_INFO "Processor timebase sync using software\n");
+ pr_info("Processor timebase sync using software\n");
}
#ifndef CONFIG_PPC64
@@ -763,7 +763,7 @@ static void __init smp_core99_probe(void)
for_each_node_by_type(cpus, "cpu")
++ncpus;
- printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
+ pr_info("PowerMac SMP probe found %d cpus\n", ncpus);
/* Nothing more to do if less than 2 of them */
if (ncpus <= 1)
@@ -940,7 +940,7 @@ static void pmac_cpu_offline_self(void)
* on core99 platforms for now ...
*/
- printk(KERN_INFO "CPU#%d offline\n", cpu);
+ pr_info("CPU#%d offline\n", cpu);
generic_set_cpu_dead(cpu);
smp_wmb();
--
2.47.2
More information about the Linuxppc-dev
mailing list