[PATCH 05/12] i2c: ali1535: use i2c_adapter-specific printk helpers

[Bartosz Golaszewski]

Convert all instances of using device printk helpers with struct device
embedded in struct i2c_adapter to the new i2c-specific macros that hide
that dereference.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
---
 drivers/i2c/busses/i2c-ali1535.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 1eac358380405838d15551e353605cab0a7e5e65..bf0f36450c5930f86b122618d17eecf1782dd776 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -215,7 +215,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, TYP=%02x, "
+	i2c_dbg(adap, "Transaction (pre): STS=%02x, TYP=%02x, "
 		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
 		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
 		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
@@ -245,7 +245,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 		 * BUSY bit may come back on when you try and use the chip
 		 * again.  If that's the case you are stuck.
 		 */
-		dev_info(&adap->dev,
+		i2c_info(adap,
 			"Resetting entire SMB Bus to clear busy condition (%02x)\n",
 			temp);
 		outb_p(ALI1535_T_OUT, SMBHSTTYP);
@@ -262,7 +262,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 			 * power reset as one of the bits now appears to be
 			 * stuck */
 			/* This may be a bus or device with electrical problems. */
-			dev_err(&adap->dev,
+			i2c_err(adap,
 				"SMBus reset failed! (0x%02x) - controller or "
 				"device on bus is probably hung\n", temp);
 			return -EBUSY;
@@ -290,7 +290,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 
 	if (temp & ALI1535_STS_FAIL) {
 		result = -EIO;
-		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+		i2c_dbg(adap, "Error: Failed bus transaction\n");
 	}
 
 	/* Unfortunately the ALI SMB controller maps "no response" and "bus
@@ -299,7 +299,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	 */
 	if (temp & ALI1535_STS_BUSERR) {
 		result = -ENXIO;
-		dev_dbg(&adap->dev,
+		i2c_dbg(adap,
 			"Error: no response or bus collision ADD=%02x\n",
 			inb_p(SMBHSTADD));
 	}
@@ -307,14 +307,14 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	/* haven't ever seen this */
 	if (temp & ALI1535_STS_DEV) {
 		result = -EIO;
-		dev_err(&adap->dev, "Error: device error\n");
+		i2c_err(adap, "Error: device error\n");
 	}
 
 	/* check to see if the "command complete" indication is set */
 	if (!(temp & ALI1535_STS_DONE))
 		result = -ETIMEDOUT;
 
-	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, "
+	i2c_dbg(adap, "Transaction (post): STS=%02x, TYP=%02x, "
 		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
 		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
 		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
@@ -352,7 +352,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 		temp = inb_p(SMBHSTSTS);
 	}
 	if (timeout >= MAX_TIMEOUT)
-		dev_warn(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);
+		i2c_warn(adap, "Idle wait Timeout! STS=0x%02x\n", temp);
 
 	/* clear status register (clear-on-write) */
 	outb_p(0xFF, SMBHSTSTS);
@@ -416,7 +416,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 		}
 		break;
 	default:
-		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		i2c_warn(adap, "Unsupported transaction %d\n", size);
 		result = -EOPNOTSUPP;
 		goto EXIT;
 	}
@@ -449,7 +449,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 		outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
 		for (i = 1; i <= data->block[0]; i++) {
 			data->block[i] = inb_p(SMBBLKDAT);
-			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
+			i2c_dbg(adap, "Blk: len=%d, i=%d, data=%02x\n",
 				len, i, data->block[i]);
 		}
 		break;

-- 
2.47.3