[PATCH v3 5/6] dt-bindings: soc: fsl: qe: Add support of IRQ in QE GPIO

[Christophe Leroy]

Le 28/08/2025 à 15:28, Rob Herring a écrit :
> On Mon, Aug 25, 2025 at 2:20 AM Christophe Leroy
> <christophe.leroy at csgroup.eu> wrote:
>>
>> In the QE, a few GPIOs are IRQ capable. Similarly to
>> commit 726bd223105c ("powerpc/8xx: Adding support of IRQ in MPC8xx
>> GPIO"), add IRQ support to QE GPIO.
>>
>> Add property 'fsl,qe-gpio-irq-mask' similar to
>> 'fsl,cpm1-gpio-irq-mask' that define which of the GPIOs have IRQs.
> 
> Why do you need to know this? The ones that have interrupts will be
> referenced by an 'interrupts' property somewhere.

I don't follow you. The ones that have interrupts need to be reported by 
gc->qe_gpio_to_irq[] so that gpiod_to_irq() return the IRQ number, for 
instance to gpio_sysfs_request_irq() so that it can install an irq 
handler. I can't see where they would be referenced by an "interrupts" 
property.

> 
>> Here is an exemple for port B of mpc8323 which has IRQs for
> 
> typo
> 
>> GPIOs PB7, PB9, PB25 and PB27.
>>
>>          qe_pio_b: gpio-controller at 1418 {
>>                  compatible = "fsl,mpc8323-qe-pario-bank";
>>                  reg = <0x1418 0x18>;
>>                  interrupts = <4 5 6 7>;
>>                  interrupt-parent = <&qepic>;
>>                  gpio-controller;
>>                  #gpio-cells = <2>;
>>                  fsl,qe-gpio-irq-mask = <0x01400050>;
>>          };
> 
> You are missing #interrupt-cells and interrupt-controller properties.

The gpio controller is not an interrupt controller. The GPIO controller 
is brought by patch 1/6 and documented in patch 6/6.

> 
> With multiple new properties, this should be converted to schema first.

Ah. I didn't know, and checkpatch.pl doesn't know either it seems.

Christophe