[PATCH v2 2/5] soc: fsl: qe: Change GPIO driver to a proper platform driver

[Christophe Leroy]

In order to be able to add interrupts to the GPIOs, first change the
QE GPIO driver to the proper platform driver in order to allow
initialisation to be done in the right order, otherwise the GPIOs
get added before the interrupts are registered.

Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
v2: Use devm_kzalloc() instead of kzalloc()
---
 drivers/soc/fsl/qe/gpio.c | 86 +++++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 39 deletions(-)

diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 8df1e8fa86a5..93fcc6d85ac7 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <linux/property.h>
+#include <linux/platform_device.h>
 
 #include <soc/fsl/qe/qe.h>
 
@@ -295,45 +296,52 @@ void qe_pin_set_gpio(struct qe_pin *qe_pin)
 }
 EXPORT_SYMBOL(qe_pin_set_gpio);
 
-static int __init qe_add_gpiochips(void)
+static int qe_gpio_probe(struct platform_device *ofdev)
 {
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
-		int ret;
-		struct qe_gpio_chip *qe_gc;
-		struct of_mm_gpio_chip *mm_gc;
-		struct gpio_chip *gc;
-
-		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
-		if (!qe_gc) {
-			ret = -ENOMEM;
-			goto err;
-		}
+	struct device *dev = &ofdev->dev;
+	struct device_node *np = dev->of_node;
+	struct qe_gpio_chip *qe_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
 
-		spin_lock_init(&qe_gc->lock);
-
-		mm_gc = &qe_gc->mm_gc;
-		gc = &mm_gc->gc;
-
-		mm_gc->save_regs = qe_gpio_save_regs;
-		gc->ngpio = QE_PIO_PINS;
-		gc->direction_input = qe_gpio_dir_in;
-		gc->direction_output = qe_gpio_dir_out;
-		gc->get = qe_gpio_get;
-		gc->set = qe_gpio_set;
-		gc->set_multiple = qe_gpio_set_multiple;
-
-		ret = of_mm_gpiochip_add_data(np, mm_gc, qe_gc);
-		if (ret)
-			goto err;
-		continue;
-err:
-		pr_err("%pOF: registration failed with status %d\n",
-		       np, ret);
-		kfree(qe_gc);
-		/* try others anyway */
-	}
-	return 0;
+	qe_gc = devm_kzalloc(dev, sizeof(*qe_gc), GFP_KERNEL);
+	if (!qe_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&qe_gc->lock);
+
+	mm_gc = &qe_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = qe_gpio_save_regs;
+	gc->ngpio = QE_PIO_PINS;
+	gc->direction_input = qe_gpio_dir_in;
+	gc->direction_output = qe_gpio_dir_out;
+	gc->get = qe_gpio_get;
+	gc->set = qe_gpio_set;
+	gc->set_multiple = qe_gpio_set_multiple;
+
+	return of_mm_gpiochip_add_data(np, mm_gc, qe_gc);
+}
+
+static const struct of_device_id qe_gpio_match[] = {
+	{
+		.compatible = "fsl,mpc8323-qe-pario-bank",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, qe_gpio_match);
+
+static struct platform_driver qe_gpio_driver = {
+	.probe		= qe_gpio_probe,
+	.driver		= {
+		.name	= "qe-gpio",
+		.of_match_table	= qe_gpio_match,
+	},
+};
+
+static int __init qe_gpio_init(void)
+{
+	return platform_driver_register(&qe_gpio_driver);
 }
-arch_initcall(qe_add_gpiochips);
+arch_initcall(qe_gpio_init);
-- 
2.49.0