[PATCH v2 1/2] powerpc/fadump: allocate memory for additional parameters early

[Ritesh Harjani (IBM)]

Sourabh Jain <sourabhjain at linux.ibm.com> writes:

> From: Hari Bathini <hbathini at linux.ibm.com>
>
> Memory for passing additional parameters to fadump capture kernel
> is allocated during subsys_initcall level, using memblock. But
> as slab is already available by this time, allocation happens via
> the buddy allocator. This may work for radix MMU but is likely to
> fail in most cases for hash MMU as hash MMU needs this memory in
> the first memory block for it to be accessible in real mode in the
> capture kernel (second boot). So, allocate memory for additional
> parameters area as soon as MMU mode is obvious.

But looks like this was only caught due to the WARN_ON_ONCE emitted from
mm/memblock.c which detected accidental use of memblock APIs when slab is
available. That begs a question on why didn't we see the issue on Hash? 
Are we not using the "param_area_supported" feature that often is it?

>
> Fixes: 683eab94da75 ("powerpc/fadump: setup additional parameters for dump capture kernel")
> Reported-by: Venkat Rao Bagalkote <venkat88 at linux.vnet.ibm.com>
> Closes: https://lore.kernel.org/lkml/a70e4064-a040-447b-8556-1fd02f19383d@linux.vnet.ibm.com/T/#u
> Cc: Mahesh Salgaonkar <mahesh at linux.ibm.com>
> Cc: Michael Ellerman <mpe at ellerman.id.au>
> Signed-off-by: Hari Bathini <hbathini at linux.ibm.com>
> Signed-off-by: Sourabh Jain <sourabhjain at linux.ibm.com>
> ---
>
> Changelog:
>
> Since v1: https://lore.kernel.org/all/20241104083528.99520-1-sourabhjain@linux.ibm.com/
>   - Drop extern keyword from fadump_setup_param_area function declaration
>   - Don't use __va() while resetting param memory area
>
> ---
>  arch/powerpc/include/asm/fadump.h |  2 ++
>  arch/powerpc/kernel/fadump.c      | 15 ++++++++++-----
>  arch/powerpc/kernel/prom.c        |  3 +++
>  3 files changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
> index ef40c9b6972a..7b3473e05273 100644
> --- a/arch/powerpc/include/asm/fadump.h
> +++ b/arch/powerpc/include/asm/fadump.h
> @@ -19,6 +19,7 @@ extern int is_fadump_active(void);
>  extern int should_fadump_crash(void);
>  extern void crash_fadump(struct pt_regs *, const char *);
>  extern void fadump_cleanup(void);
> +void fadump_setup_param_area(void);
>  extern void fadump_append_bootargs(void);
>  
>  #else	/* CONFIG_FA_DUMP */
> @@ -26,6 +27,7 @@ static inline int is_fadump_active(void) { return 0; }
>  static inline int should_fadump_crash(void) { return 0; }
>  static inline void crash_fadump(struct pt_regs *regs, const char *str) { }
>  static inline void fadump_cleanup(void) { }
> +static inline void fadump_setup_param_area(void) { }
>  static inline void fadump_append_bootargs(void) { }
>  #endif /* !CONFIG_FA_DUMP */
>  
> diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
> index a612e7513a4f..3a2863307863 100644
> --- a/arch/powerpc/kernel/fadump.c
> +++ b/arch/powerpc/kernel/fadump.c
> @@ -1586,6 +1586,12 @@ static void __init fadump_init_files(void)
>  		return;
>  	}
>  
> +	if (fw_dump.param_area) {
> +		rc = sysfs_create_file(fadump_kobj, &bootargs_append_attr.attr);
> +		if (rc)
> +			pr_err("unable to create bootargs_append sysfs file (%d)\n", rc);
> +	}
> +
>  	debugfs_create_file("fadump_region", 0444, arch_debugfs_dir, NULL,
>  			    &fadump_region_fops);
>  
> @@ -1740,7 +1746,7 @@ static void __init fadump_process(void)
>   * Reserve memory to store additional parameters to be passed
>   * for fadump/capture kernel.
>   */
> -static void __init fadump_setup_param_area(void)
> +void __init fadump_setup_param_area(void)
>  {
>  	phys_addr_t range_start, range_end;
>  
> @@ -1748,7 +1754,7 @@ static void __init fadump_setup_param_area(void)
>  		return;
>  
>  	/* This memory can't be used by PFW or bootloader as it is shared across kernels */
> -	if (radix_enabled()) {
> +	if (early_radix_enabled()) {
>  		/*
>  		 * Anywhere in the upper half should be good enough as all memory
>  		 * is accessible in real mode.
> @@ -1776,12 +1782,12 @@ static void __init fadump_setup_param_area(void)
>  						       COMMAND_LINE_SIZE,
>  						       range_start,
>  						       range_end);
> -	if (!fw_dump.param_area || sysfs_create_file(fadump_kobj, &bootargs_append_attr.attr)) {
> +	if (!fw_dump.param_area) {
>  		pr_warn("WARNING: Could not setup area to pass additional parameters!\n");
>  		return;
>  	}
>  
> -	memset(phys_to_virt(fw_dump.param_area), 0, COMMAND_LINE_SIZE);
> +	memset((void *)fw_dump.param_area, 0, COMMAND_LINE_SIZE);
>  }
>  
>  /*
> @@ -1807,7 +1813,6 @@ int __init setup_fadump(void)
>  	}
>  	/* Initialize the kernel dump memory structure and register with f/w */
>  	else if (fw_dump.reserve_dump_area_size) {
> -		fadump_setup_param_area();
>  		fw_dump.ops->fadump_init_mem_struct(&fw_dump);
>  		register_fadump();
>  	}
> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index 0be07ed407c7..47db1b1aef25 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -908,6 +908,9 @@ void __init early_init_devtree(void *params)
>  
>  	mmu_early_init_devtree();
>  
> +	/* Setup param area for passing additional parameters to fadump capture kernel. */
> +	fadump_setup_param_area();
> +

Maybe we should add a comment here saying this needs to be done after
mmu_early_init_devtree() because for pseries LPARs we need to be able to
reliably use early_radix_enabled() helper within fadump_setup_param_area().

Either ways the patch looks good to me. So please feel free to add - 
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list at gmail.com>

>  #ifdef CONFIG_PPC_POWERNV
>  	/* Scan and build the list of machine check recoverable ranges */
>  	of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
> -- 
> 2.46.2