[PATCH] tpm: atmel: Drop PPC64 specific MMIO setup
Rob Herring
robh at kernel.org
Thu Nov 7 01:50:07 AEDT 2024
On Thu, Jul 18, 2024 at 11:01 AM Jarkko Sakkinen <jarkko.sakkinen at iki.fi> wrote:
>
> On Thu Jul 18, 2024 at 5:57 PM EEST, Rob Herring wrote:
> > On Wed, Jul 17, 2024 at 6:14 AM Jarkko Sakkinen <jarkko.sakkinen at iki.fi> wrote:
> > >
> > > On Wed Jul 17, 2024 at 3:08 PM EEST, Jarkko Sakkinen wrote:
> > > > On Tue Jul 2, 2024 at 7:10 PM EEST, Rob Herring (Arm) wrote:
> > > > > The PPC64 specific MMIO setup open codes DT address functions rather
> > > > > than using standard address parsing functions. The open-coded version
> > > > > fails to handle any address translation and is not endian safe.
> > > > >
> > > > > I haven't found any evidence of what platform used this. The only thing
> > > > > that turned up was a PPC405 platform, but that is 32-bit and PPC405
> > > > > support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
> > > > > any powerpc config and never was. The support was added in 2005 and
> > > > > hasn't been touched since.
> > > > >
> > > > > Rather than try to modernize and fix this code, just remove it.
> > > > >
> > > > > Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> > > > > ---
> > > > > drivers/char/tpm/Kconfig | 2 +-
> > > > > drivers/char/tpm/tpm_atmel.c | 64 +++++++++++++++-
> > > > > drivers/char/tpm/tpm_atmel.h | 140 -----------------------------------
> > > > > 3 files changed, 62 insertions(+), 144 deletions(-)
> > > > > delete mode 100644 drivers/char/tpm/tpm_atmel.h
> > > > >
> > > > > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> > > > > index e63a6a17793c..9b655e9fc7ab 100644
> > > > > --- a/drivers/char/tpm/Kconfig
> > > > > +++ b/drivers/char/tpm/Kconfig
> > > > > @@ -162,7 +162,7 @@ config TCG_NSC
> > > > >
> > > > > config TCG_ATMEL
> > > > > tristate "Atmel TPM Interface"
> > > > > - depends on PPC64 || HAS_IOPORT_MAP
> > > > > + depends on HAS_IOPORT_MAP
> > > > > depends on HAS_IOPORT
> > > > > help
> > > > > If you have a TPM security chip from Atmel say Yes and it
> > > > > diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
> > > > > index 9fb2defa9dc4..622c4abe8cb3 100644
> > > > > --- a/drivers/char/tpm/tpm_atmel.c
> > > > > +++ b/drivers/char/tpm/tpm_atmel.c
> > > > > @@ -15,7 +15,67 @@
> > > > > */
> > > > >
> > > > > #include "tpm.h"
> > > > > -#include "tpm_atmel.h"
> > > > > +
> > > > > +struct tpm_atmel_priv {
> > > > > + int region_size;
> > > > > + int have_region;
> > > > > + unsigned long base;
> > > > > + void __iomem *iobase;
> > > > > +};
> > > > > +
> > > > > +#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
> > > > > +#define atmel_putb(val, chip, offset) \
> > > > > + outb(val, atmel_get_priv(chip)->base + offset)
> > > > > +#define atmel_request_region request_region
> > > > > +#define atmel_release_region release_region
> > > > > +/* Atmel definitions */
> > > > > +enum tpm_atmel_addr {
> > > > > + TPM_ATMEL_BASE_ADDR_LO = 0x08,
> > > > > + TPM_ATMEL_BASE_ADDR_HI = 0x09
> > > > > +};
> > > > > +
> > > > > +static inline int tpm_read_index(int base, int index)
> > > > > +{
> > > > > + outb(index, base);
> > > > > + return inb(base+1) & 0xFF;
> > > > > +}
> > > > > +
> > > > > +/* Verify this is a 1.1 Atmel TPM */
> > > > > +static int atmel_verify_tpm11(void)
> > > > > +{
> > > > > +
> > > > > + /* verify that it is an Atmel part */
> > > > > + if (tpm_read_index(TPM_ADDR, 4) != 'A' ||
> > > > > + tpm_read_index(TPM_ADDR, 5) != 'T' ||
> > > > > + tpm_read_index(TPM_ADDR, 6) != 'M' ||
> > > > > + tpm_read_index(TPM_ADDR, 7) != 'L')
> > > > > + return 1;
> > > > > +
> > > > > + /* query chip for its version number */
> > > > > + if (tpm_read_index(TPM_ADDR, 0x00) != 1 ||
> > > > > + tpm_read_index(TPM_ADDR, 0x01) != 1)
> > > > > + return 1;
> > > > > +
> > > > > + /* This is an atmel supported part */
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +/* Determine where to talk to device */
> > > > > +static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > > > +{
> > > > > + int lo, hi;
> > > > > +
> > > > > + if (atmel_verify_tpm11() != 0)
> > > > > + return NULL;
> > > > > +
> > > > > + lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
> > > > > + hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
> > > > > +
> > > > > + *base = (hi << 8) | lo;
> > > > > + *region_size = 2;
> > > > > +
> > > > > + return ioport_map(*base, *region_size);
> > > > > +}
> > > > >
> > > > > /* write status bits */
> > > > > enum tpm_atmel_write_status {
> > > > > @@ -142,7 +202,6 @@ static void atml_plat_remove(void)
> > > > > tpm_chip_unregister(chip);
> > > > > if (priv->have_region)
> > > > > atmel_release_region(priv->base, priv->region_size);
> > > > > - atmel_put_base_addr(priv->iobase);
> > > > > platform_device_unregister(pdev);
> > > > > }
> > > > >
> > > > > @@ -211,7 +270,6 @@ static int __init init_atmel(void)
> > > > > err_unreg_dev:
> > > > > platform_device_unregister(pdev);
> > > > > err_rel_reg:
> > > > > - atmel_put_base_addr(iobase);
> > > > > if (have_region)
> > > > > atmel_release_region(base,
> > > > > region_size);
> > > > > diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
> > > > > deleted file mode 100644
> > > > > index 7ac3f69dcf0f..000000000000
> > > > > --- a/drivers/char/tpm/tpm_atmel.h
> > > > > +++ /dev/null
> > > > > @@ -1,140 +0,0 @@
> > > > > -/* SPDX-License-Identifier: GPL-2.0-only */
> > > > > -/*
> > > > > - * Copyright (C) 2005 IBM Corporation
> > > > > - *
> > > > > - * Authors:
> > > > > - * Kylene Hall <kjhall at us.ibm.com>
> > > > > - *
> > > > > - * Maintained by: <tpmdd-devel at lists.sourceforge.net>
> > > > > - *
> > > > > - * Device driver for TCG/TCPA TPM (trusted platform module).
> > > > > - * Specifications at www.trustedcomputinggroup.org
> > > > > - *
> > > > > - * These difference are required on power because the device must be
> > > > > - * discovered through the device tree and iomap must be used to get
> > > > > - * around the need for holes in the io_page_mask. This does not happen
> > > > > - * automatically because the tpm is not a normal pci device and lives
> > > > > - * under the root node.
> > > > > - */
> > > > > -
> > > > > -struct tpm_atmel_priv {
> > > > > - int region_size;
> > > > > - int have_region;
> > > > > - unsigned long base;
> > > > > - void __iomem *iobase;
> > > > > -};
> > > > > -
> > > > > -#ifdef CONFIG_PPC64
> > > > > -
> > > > > -#include <linux/of.h>
> > > > > -
> > > > > -#define atmel_getb(priv, offset) readb(priv->iobase + offset)
> > > > > -#define atmel_putb(val, priv, offset) writeb(val, priv->iobase + offset)
> > > > > -#define atmel_request_region request_mem_region
> > > > > -#define atmel_release_region release_mem_region
> > > > > -
> > > > > -static inline void atmel_put_base_addr(void __iomem *iobase)
> > > > > -{
> > > > > - iounmap(iobase);
> > > > > -}
> > > > > -
> > > > > -static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > > > -{
> > > > > - struct device_node *dn;
> > > > > - unsigned long address, size;
> > > > > - const unsigned int *reg;
> > > > > - int reglen;
> > > > > - int naddrc;
> > > > > - int nsizec;
> > > > > -
> > > > > - dn = of_find_node_by_name(NULL, "tpm");
> > > > > -
> > > > > - if (!dn)
> > > > > - return NULL;
> > > > > -
> > > > > - if (!of_device_is_compatible(dn, "AT97SC3201")) {
> > > > > - of_node_put(dn);
> > > > > - return NULL;
> > > > > - }
> > > > > -
> > > > > - reg = of_get_property(dn, "reg", ®len);
> > > > > - naddrc = of_n_addr_cells(dn);
> > > > > - nsizec = of_n_size_cells(dn);
> > > > > -
> > > > > - of_node_put(dn);
> > > > > -
> > > > > -
> > > > > - if (naddrc == 2)
> > > > > - address = ((unsigned long) reg[0] << 32) | reg[1];
> > > > > - else
> > > > > - address = reg[0];
> > > > > -
> > > > > - if (nsizec == 2)
> > > > > - size =
> > > > > - ((unsigned long) reg[naddrc] << 32) | reg[naddrc + 1];
> > > > > - else
> > > > > - size = reg[naddrc];
> > > > > -
> > > > > - *base = address;
> > > > > - *region_size = size;
> > > > > - return ioremap(*base, *region_size);
> > > > > -}
> > > > > -#else
> > > > > -#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
> > > > > -#define atmel_putb(val, chip, offset) \
> > > > > - outb(val, atmel_get_priv(chip)->base + offset)
> > > > > -#define atmel_request_region request_region
> > > > > -#define atmel_release_region release_region
> > > > > -/* Atmel definitions */
> > > > > -enum tpm_atmel_addr {
> > > > > - TPM_ATMEL_BASE_ADDR_LO = 0x08,
> > > > > - TPM_ATMEL_BASE_ADDR_HI = 0x09
> > > > > -};
> > > > > -
> > > > > -static inline int tpm_read_index(int base, int index)
> > > > > -{
> > > > > - outb(index, base);
> > > > > - return inb(base+1) & 0xFF;
> > > > > -}
> > > > > -
> > > > > -/* Verify this is a 1.1 Atmel TPM */
> > > > > -static int atmel_verify_tpm11(void)
> > > > > -{
> > > > > -
> > > > > - /* verify that it is an Atmel part */
> > > > > - if (tpm_read_index(TPM_ADDR, 4) != 'A' ||
> > > > > - tpm_read_index(TPM_ADDR, 5) != 'T' ||
> > > > > - tpm_read_index(TPM_ADDR, 6) != 'M' ||
> > > > > - tpm_read_index(TPM_ADDR, 7) != 'L')
> > > > > - return 1;
> > > > > -
> > > > > - /* query chip for its version number */
> > > > > - if (tpm_read_index(TPM_ADDR, 0x00) != 1 ||
> > > > > - tpm_read_index(TPM_ADDR, 0x01) != 1)
> > > > > - return 1;
> > > > > -
> > > > > - /* This is an atmel supported part */
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > -static inline void atmel_put_base_addr(void __iomem *iobase)
> > > > > -{
> > > > > -}
> > > > > -
> > > > > -/* Determine where to talk to device */
> > > > > -static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > > > -{
> > > > > - int lo, hi;
> > > > > -
> > > > > - if (atmel_verify_tpm11() != 0)
> > > > > - return NULL;
> > > > > -
> > > > > - lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
> > > > > - hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
> > > > > -
> > > > > - *base = (hi << 8) | lo;
> > > > > - *region_size = 2;
> > > > > -
> > > > > - return ioport_map(*base, *region_size);
> > > > > -}
> > > > > -#endif
> > > >
> > > > Responding from holidays but:
> > > >
> > > > Reviewed-by: Jarkko Sakkinen <jarkko at kernel.org>
> > > >
> > > > [still away for couple of weeks]
> > >
> > > I got these in with checkpatch.pl --strict:
> > >
> > > CHECK: Macro argument 'offset' may be better as '(offset)' to avoid precedence issues
> > > #59: FILE: drivers/char/tpm/tpm_atmel.c:26:
> > > +#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
> > >
> > > CHECK: Macro argument 'offset' may be better as '(offset)' to avoid precedence issues
> > > #60: FILE: drivers/char/tpm/tpm_atmel.c:27:
> > > +#define atmel_putb(val, chip, offset) \
> > > + outb(val, atmel_get_priv(chip)->base + offset)
> > >
> > > CHECK: spaces preferred around that '+' (ctx:VxV)
> > > #73: FILE: drivers/char/tpm/tpm_atmel.c:40:
> > > + return inb(base+1) & 0xFF;
> > > ^
> > >
> > > CHECK: Blank lines aren't necessary after an open brace '{'
> > > #79: FILE: drivers/char/tpm/tpm_atmel.c:46:
> > > +{
> > > +
> > >
> > > Can you address them and I'll tag the next version, once I've
> > > revisited checkpatch. Otherwise, nothing against the code change.
> >
> > Those all existed before because I just moved what was left of the
> > header contents into the .c file. Fixing them seems like a separate
> > change to me. I can just leave the header in place and avoid the
> > warnings if you prefer. Otherwise, those warnings are the least of the
> > clean-up this driver needs. For starters, I would make those defines
> > static inlines instead.
>
> Ah, ok sorry. It was fairly mechanical check as I'm just quickly
> going critical stuff from holidays.
>
> I'm back after next week, so I'd really like to hold with this
> up until that and prepare when I'm back a patch set, which includes
> a supplemental patch fixing those issues (if you don't mind).
Whatever happened to this? Can you please apply my patch if you don't
have the time for further rework.
Rob
More information about the Linuxppc-dev
mailing list