[PATCH 3/5] powerpc64/bpf: jit support for sign extended load
Artem Savkov
asavkov at redhat.com
Fri May 17 17:56:48 AEST 2024
Add jit support for sign extended load. Tested using test_bpf module.
Signed-off-by: Artem Savkov <asavkov at redhat.com>
---
arch/powerpc/include/asm/ppc-opcode.h | 1 +
arch/powerpc/net/bpf_jit_comp64.c | 61 ++++++++++++++++++---------
2 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 076ae60b4a55d..76cc9a2d82065 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -471,6 +471,7 @@
#define PPC_RAW_VCMPEQUB_RC(vrt, vra, vrb) \
(0x10000006 | ___PPC_RT(vrt) | ___PPC_RA(vra) | ___PPC_RB(vrb) | __PPC_RC21)
#define PPC_RAW_LD(r, base, i) (0xe8000000 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_DS(i))
+#define PPC_RAW_LWA(r, base, i) (0xe8000002 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_DS(i))
#define PPC_RAW_LWZ(r, base, i) (0x80000000 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_L(i))
#define PPC_RAW_LWZX(t, a, b) (0x7c00002e | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b))
#define PPC_RAW_STD(r, base, i) (0xf8000000 | ___PPC_RS(r) | ___PPC_RA(base) | IMM_DS(i))
diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 97191cf091bbf..b9f47398b311d 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -925,13 +925,19 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
*/
/* dst = *(u8 *)(ul) (src + off) */
case BPF_LDX | BPF_MEM | BPF_B:
+ case BPF_LDX | BPF_MEMSX | BPF_B:
case BPF_LDX | BPF_PROBE_MEM | BPF_B:
+ case BPF_LDX | BPF_PROBE_MEMSX | BPF_B:
/* dst = *(u16 *)(ul) (src + off) */
case BPF_LDX | BPF_MEM | BPF_H:
+ case BPF_LDX | BPF_MEMSX | BPF_H:
case BPF_LDX | BPF_PROBE_MEM | BPF_H:
+ case BPF_LDX | BPF_PROBE_MEMSX | BPF_H:
/* dst = *(u32 *)(ul) (src + off) */
case BPF_LDX | BPF_MEM | BPF_W:
+ case BPF_LDX | BPF_MEMSX | BPF_W:
case BPF_LDX | BPF_PROBE_MEM | BPF_W:
+ case BPF_LDX | BPF_PROBE_MEMSX | BPF_W:
/* dst = *(u64 *)(ul) (src + off) */
case BPF_LDX | BPF_MEM | BPF_DW:
case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
@@ -941,7 +947,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
* load only if addr is kernel address (see is_kernel_addr()), otherwise
* set dst_reg=0 and move on.
*/
- if (BPF_MODE(code) == BPF_PROBE_MEM) {
+ if (BPF_MODE(code) == BPF_PROBE_MEM || BPF_MODE(code) == BPF_PROBE_MEMSX) {
EMIT(PPC_RAW_ADDI(tmp1_reg, src_reg, off));
if (IS_ENABLED(CONFIG_PPC_BOOK3E_64))
PPC_LI64(tmp2_reg, 0x8000000000000000ul);
@@ -954,30 +960,47 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
* Check if 'off' is word aligned for BPF_DW, because
* we might generate two instructions.
*/
- if (BPF_SIZE(code) == BPF_DW && (off & 3))
+ if ((BPF_SIZE(code) == BPF_DW ||
+ (BPF_SIZE(code) == BPF_B && BPF_MODE(code) == BPF_PROBE_MEMSX)) &&
+ (off & 3))
PPC_JMP((ctx->idx + 3) * 4);
else
PPC_JMP((ctx->idx + 2) * 4);
}
- switch (size) {
- case BPF_B:
- EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
- break;
- case BPF_H:
- EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
- break;
- case BPF_W:
- EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
- break;
- case BPF_DW:
- if (off % 4) {
- EMIT(PPC_RAW_LI(tmp1_reg, off));
- EMIT(PPC_RAW_LDX(dst_reg, src_reg, tmp1_reg));
- } else {
- EMIT(PPC_RAW_LD(dst_reg, src_reg, off));
+ if (BPF_MODE(code) == BPF_MEMSX || BPF_MODE(code) == BPF_PROBE_MEMSX) {
+ switch (size) {
+ case BPF_B:
+ EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
+ EMIT(PPC_RAW_EXTSB(dst_reg, dst_reg));
+ break;
+ case BPF_H:
+ EMIT(PPC_RAW_LHA(dst_reg, src_reg, off));
+ break;
+ case BPF_W:
+ EMIT(PPC_RAW_LWA(dst_reg, src_reg, off));
+ break;
+ }
+ } else {
+ switch (size) {
+ case BPF_B:
+ EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
+ break;
+ case BPF_H:
+ EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
+ break;
+ case BPF_W:
+ EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
+ break;
+ case BPF_DW:
+ if (off % 4) {
+ EMIT(PPC_RAW_LI(tmp1_reg, off));
+ EMIT(PPC_RAW_LDX(dst_reg, src_reg, tmp1_reg));
+ } else {
+ EMIT(PPC_RAW_LD(dst_reg, src_reg, off));
+ }
+ break;
}
- break;
}
if (size != BPF_DW && insn_is_zext(&insn[i + 1]))
--
2.45.0
More information about the Linuxppc-dev
mailing list