[PATCH v4 5/7] PCI: Store # of supported End-End TLP Prefixes

[Ilpo Järvinen]

eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes
are supported by the path or not, the value is only calculated if
CONFIG_PCI_PASID is set.

The Max End-End TLP Prefixes field in the Device Capabilities Register
2 also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6
sec 7.5.3.15). The number of supported End-End Prefixes is useful for
reading correct number of DWORDs from TLP Prefix Log register in AER
capability (PCIe r6 sec 7.8.4.12).

Replace eetlp_prefix_path with eetlp_prefix_max and determine the
number of supported End-End Prefixes regardless of CONFIG_PCI_PASID so
that an upcoming commit generalizing TLP Prefix Log register reading
does not have to read extra DWORDs for End-End Prefixes that never will
be there.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/pci/ats.c             |  2 +-
 drivers/pci/probe.c           | 14 +++++++++-----
 include/linux/pci.h           |  2 +-
 include/uapi/linux/pci_regs.h |  1 +
 4 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index c570892b2090..e13433dcfc82 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -377,7 +377,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
 	if (WARN_ON(pdev->pasid_enabled))
 		return -EBUSY;
 
-	if (!pdev->eetlp_prefix_path && !pdev->pasid_no_tlp)
+	if (!pdev->eetlp_prefix_max && !pdev->pasid_no_tlp)
 		return -EINVAL;
 
 	if (!pasid)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 1325fbae2f28..02035b005a53 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2211,8 +2211,8 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev)
 
 static void pci_configure_eetlp_prefix(struct pci_dev *dev)
 {
-#ifdef CONFIG_PCI_PASID
 	struct pci_dev *bridge;
+	unsigned int eetlp_max;
 	int pcie_type;
 	u32 cap;
 
@@ -2224,15 +2224,19 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev)
 		return;
 
 	pcie_type = pci_pcie_type(dev);
+
+	eetlp_max = FIELD_GET(PCI_EXP_DEVCAP2_EE_PREFIX_MAX, cap);
+	/* 00b means 4 */
+	eetlp_max = eetlp_max ?: 4;
+
 	if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
 	    pcie_type == PCI_EXP_TYPE_RC_END)
-		dev->eetlp_prefix_path = 1;
+		dev->eetlp_prefix_max = eetlp_max;
 	else {
 		bridge = pci_upstream_bridge(dev);
-		if (bridge && bridge->eetlp_prefix_path)
-			dev->eetlp_prefix_path = 1;
+		if (bridge && bridge->eetlp_prefix_max)
+			dev->eetlp_prefix_max = eetlp_max;
 	}
-#endif
 }
 
 static void pci_configure_serr(struct pci_dev *dev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 16493426a04f..29c51325b1d9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -397,7 +397,7 @@ struct pci_dev {
 					   supported from root to here */
 #endif
 	unsigned int	pasid_no_tlp:1;		/* PASID works without TLP Prefix */
-	unsigned int	eetlp_prefix_path:1;	/* End-to-End TLP Prefix */
+	unsigned int	eetlp_prefix_max:3;	/* Max # of End-End TLP Prefixes, 0=not supported */
 
 	pci_channel_state_t error_state;	/* Current connectivity state */
 	struct device	dev;			/* Generic device interface */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index a39193213ff2..09e0c300c952 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -661,6 +661,7 @@
 #define  PCI_EXP_DEVCAP2_OBFF_MSG	0x00040000 /* New message signaling */
 #define  PCI_EXP_DEVCAP2_OBFF_WAKE	0x00080000 /* Re-use WAKE# for OBFF */
 #define  PCI_EXP_DEVCAP2_EE_PREFIX	0x00200000 /* End-End TLP Prefix */
+#define  PCI_EXP_DEVCAP2_EE_PREFIX_MAX	0x00c00000 /* Max End-End TLP Prefixes */
 #define PCI_EXP_DEVCTL2		0x28	/* Device Control 2 */
 #define  PCI_EXP_DEVCTL2_COMP_TIMEOUT	0x000f	/* Completion Timeout Value */
 #define  PCI_EXP_DEVCTL2_COMP_TMOUT_DIS	0x0010	/* Completion Timeout Disable */
-- 
2.39.2