[PATCHv3 pci-next 1/2] PCI/AER: correctable error message as KERN_INFO

[Xi Ruoyao]

On Mon, 2024-03-25 at 18:15 +0800, Xi Ruoyao wrote:
> On Mon, 2024-03-25 at 16:45 +0800, Ethan Zhao wrote:
> > On 3/25/2024 1:19 AM, Xi Ruoyao wrote:
> > > On Mon, 2023-09-18 at 14:39 -0500, Bjorn Helgaas wrote:
> > > > On Mon, Sep 18, 2023 at 07:42:30PM +0800, Xi Ruoyao wrote:
> > > > > ...
> > > > > My workstation suffers from too much correctable AER reporting as well
> > > > > (related to Intel's errata "RPL013: Incorrectly Formed PCIe Packets May
> > > > > Generate Correctable Errors" and/or the motherboard design, I guess).
> > > > We should rate-limit correctable error reporting so it's not
> > > > overwhelming.
> > > > 
> > > > At the same time, I'm *also* interested in the cause of these errors,
> > > > in case there's a Linux defect or a hardware erratum that we can work
> > > > around.  Do you have a bug report with any more details, e.g., a dmesg
> > > > log and "sudo lspci -vv" output?
> > > Hi Bjorn,
> > > 
> > > Sorry for the *very* late reply (somehow I didn't see the reply at all
> > > before it was removed by my cron job, and now I just savaged it from
> > > lore.kernel.org...)
> > > 
> > > The dmesg is like:
> > > 
> > > [  882.456994] pcieport 0000:00:1c.1: AER: Multiple Correctable error message received from 0000:00:1c.1
> > > [  882.457002] pcieport 0000:00:1c.1: AER: found no error details for 0000:00:1c.1
> > > [  882.457003] pcieport 0000:00:1c.1: AER: Multiple Correctable error message received from 0000:06:00.0
> > > [  883.545763] pcieport 0000:00:1c.1: AER: Multiple Correctable error message received from 0000:00:1c.1
> > > [  883.545789] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
> > > [  883.545790] pcieport 0000:00:1c.1:   device [8086:7a39] error status/mask=00000001/00002000
> > > [  883.545792] pcieport 0000:00:1c.1:    [ 0] RxErr                  (First)
> > > [  883.545794] pcieport 0000:00:1c.1: AER:   Error of this Agent is reported first
> > > [  883.545798] r8169 0000:06:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Transmitter ID)
> > > [  883.545799] r8169 0000:06:00.0:   device [10ec:8125] error status/mask=00001101/0000e000
> > > [  883.545800] r8169 0000:06:00.0:    [ 0] RxErr                  (First)
> > > [  883.545801] r8169 0000:06:00.0:    [ 8] Rollover
> > > [  883.545802] r8169 0000:06:00.0:    [12] Timeout
> > > [  883.545815] pcieport 0000:00:1c.1: AER: Correctable error message received from 0000:00:1c.1
> > > [  883.545823] pcieport 0000:00:1c.1: AER: found no error details for 0000:00:1c.1
> > > [  883.545824] pcieport 0000:00:1c.1: AER: Multiple Correctable error message received from 0000:06:00.0
> > > 
> > > lspci output attached.
> > > 
> > > Intel has issued an errata "RPL013" saying:
> > > 
> > > "Under complex microarchitectural conditions, the PCIe controller may
> > > transmit an incorrectly formed Transaction Layer Packet (TLP), which
> > > will fail CRC checks. When this erratum occurs, the PCIe end point may
> > > record correctable errors resulting in either a NAK or link recovery.
> > > Intel® has not observed any functional impact due to this erratum."
> > > 
> > > But I'm really unsure if it describes my issue.
> > > 
> > > Do you think I have some broken hardware and I should replace the CPU
> > > and/or the motherboard (where the r8169 is soldered)?  I've noticed that
> > > my 13900K is almost impossible to overclock (despite it's a K), but I've
> > > not encountered any issue other than these AER reporting so far after I
> > > gave up overclocking.
> > 
> > Seems there are two r8169 nics on your board, only 0000:06:00.0 reports
> > aer errors, how about another one the 0000:07:00.0 nic ?
> 
> It never happens to 0000:07:00.0, even if I plug the ethernet cable into
> it instead of 0000:06:00.0.
> 
> Maybe I should just use 0000:07:00.0 and blacklist 0000:06:00.0 as I
> don't need two NICs?

Plugging the ethernet cable into 0000:07:00.0 and then
"echo 1 > /sys/bus/pci/devices/0000:00:1c.1/remove" work for me...

-- 
Xi Ruoyao <xry111 at xry111.site>
School of Aerospace Science and Technology, Xidian University