[RFC PATCH v2 2/3] dt-bindings: tpm: Add linux,sml-log to ibm,vtpm.yaml

Lukas Wunner lukas at wunner.de
Tue Mar 12 22:11:09 AEDT 2024


On Mon, Mar 11, 2024 at 09:20:29AM -0400, Stefan Berger wrote:
> Add linux,sml-log, which carries the firmware TPM log in a uint8-array, to
> the properties. Either this property is required or both linux,sml-base and
> linux,sml-size are required. Add a test case for verification.
> 
> Fixes: 82003e0487fb ("Documentation: tpm: add the IBM Virtual TPM device tree binding documentation")

The Fixes tag is confusing.  The patch won't even apply cleanly to the
v4.10 commit referenced here as the conversion to yaml happened only
recently with v6.8.

Why is the Fixes tag necessary in the first place?  Same question for
the other patches in the series.  This looks like feature work rather
than a fix.  Not sure whether it satisfies the "obviously correct"
rule per Documentation/process/stable-kernel-rules.rst.


> --- a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
> +++ b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
> @@ -74,8 +74,6 @@ required:
>    - ibm,my-dma-window
>    - ibm,my-drc-index
>    - ibm,loc-code
> -  - linux,sml-base
> -  - linux,sml-size

I assume that either these two or the new "linux,sml-log" property
are (still) required?  If so, a quick grep through the bindings
(e.g. auxdisplay/img,ascii-lcd.yaml) shows that the following
might work:

required:
  - ...

oneOf:
  - required:
      - linux,sml-base
  - required:
      - linux,sml-log


> --- a/Documentation/devicetree/bindings/tpm/tpm-common.yaml
> +++ b/Documentation/devicetree/bindings/tpm/tpm-common.yaml
> @@ -30,6 +30,11 @@ properties:
>        size of reserved memory allocated for firmware event log
>      $ref: /schemas/types.yaml#/definitions/uint32
>  
> +  linux,sml-log:
> +    description:
> +      Content of firmware event log

Please add one or two sentences of context so that readers don't
need to use git blame + git log to find out what this is for.
(Mention at least that the property may be used to pass the log
to a kexec kernel.)


> -# must only have either memory-region or linux,sml-base
> +# must only have either memory-region or linux,sml-base/size or linux,sml-log
>  # as well as either resets or reset-gpios
>  dependentSchemas:
>    memory-region:
>      properties:
>        linux,sml-base: false
> +      linux,sml-log: false
>    linux,sml-base:
>      properties:
>        memory-region: false
> +      linux,sml-log: false
> +  linux,sml-log:
> +    properties:
> +      memory-region: false
> +      linux,sml-base: false
> +      linux,sml-size: false

Could you add "linux,sml-size: false" to "memory-region" as well
while at it for consistency?

Thanks,

Lukas


More information about the Linuxppc-dev mailing list