[kvm-unit-tests PATCH 5/7] arch-run: Add a "continuous" migration option for tests
Nicholas Piggin
npiggin at gmail.com
Tue Mar 5 13:58:37 AEDT 2024
On Mon Mar 4, 2024 at 7:19 PM AEST, Andrew Jones wrote:
> On Mon, Mar 04, 2024 at 07:17:35AM +0100, Thomas Huth wrote:
> > On 26/02/2024 10.38, Nicholas Piggin wrote:
> > > The cooperative migration protocol is very good to control precise
> > > pre and post conditions for a migration event. However in some cases
> > > its intrusiveness to the test program, can mask problems and make
> > > analysis more difficult.
> > >
> > > For example to stress test migration vs concurrent complicated
> > > memory access, including TLB refill, ram dirtying, etc., then the
> > > tight spin at getchar() and resumption of the workload after
> > > migration is unhelpful.
> > >
> > > This adds a continuous migration mode that directs the harness to
> > > perform migrations continually. This is added to the migration
> > > selftests, which also sees cooperative migration iterations reduced
> > > to avoid increasing test time too much.
> > >
> > > Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
> > > ---
> > > common/selftest-migration.c | 16 +++++++++--
> > > lib/migrate.c | 18 ++++++++++++
> > > lib/migrate.h | 3 ++
> > > scripts/arch-run.bash | 55 ++++++++++++++++++++++++++++++++-----
> > > 4 files changed, 82 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/common/selftest-migration.c b/common/selftest-migration.c
> > > index 0afd8581c..9a9b61835 100644
> > > --- a/common/selftest-migration.c
> > > +++ b/common/selftest-migration.c
> > > @@ -9,12 +9,13 @@
> > > */
> > > #include <libcflat.h>
> > > #include <migrate.h>
> > > +#include <asm/time.h>
> > > -#define NR_MIGRATIONS 30
> > > +#define NR_MIGRATIONS 15
> > > int main(int argc, char **argv)
> > > {
> > > - report_prefix_push("migration");
> > > + report_prefix_push("migration harness");
> > > if (argc > 1 && !strcmp(argv[1], "skip")) {
> > > migrate_skip();
> > > @@ -24,7 +25,16 @@ int main(int argc, char **argv)
> > > for (i = 0; i < NR_MIGRATIONS; i++)
> > > migrate_quiet();
> > > - report(true, "simple harness stress");
> > > + report(true, "cooperative migration");
> > > +
> > > + migrate_begin_continuous();
> > > + mdelay(2000);
> > > + migrate_end_continuous();
> > > + mdelay(1000);
> > > + migrate_begin_continuous();
> > > + mdelay(2000);
> > > + migrate_end_continuous();
> > > + report(true, "continuous migration");
> > > }
> > > report_prefix_pop();
> > > diff --git a/lib/migrate.c b/lib/migrate.c
> > > index 1d22196b7..770f76d5c 100644
> > > --- a/lib/migrate.c
> > > +++ b/lib/migrate.c
> > > @@ -60,3 +60,21 @@ void migrate_skip(void)
> > > puts("Skipped VM migration (quiet)\n");
> > > (void)getchar();
> > > }
> > > +
> > > +void migrate_begin_continuous(void)
> > > +{
> > > + puts("Begin continuous migration\n");
> > > + (void)getchar();
> > > +}
> > > +
> > > +void migrate_end_continuous(void)
> > > +{
> > > + /*
> > > + * Migration can split this output between source and dest QEMU
> > > + * output files, print twice and match once to always cope with
> > > + * a split.
> > > + */
> > > + puts("End continuous migration\n");
> > > + puts("End continuous migration (quiet)\n");
> > > + (void)getchar();
> > > +}
> > > diff --git a/lib/migrate.h b/lib/migrate.h
> > > index db6e0c501..35b6703a2 100644
> > > --- a/lib/migrate.h
> > > +++ b/lib/migrate.h
> > > @@ -11,3 +11,6 @@ void migrate_quiet(void);
> > > void migrate_once(void);
> > > void migrate_skip(void);
> > > +
> > > +void migrate_begin_continuous(void);
> > > +void migrate_end_continuous(void);
> > > diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
> > > index d0f6f098f..5c7e72036 100644
> > > --- a/scripts/arch-run.bash
> > > +++ b/scripts/arch-run.bash
> > > @@ -125,15 +125,17 @@ qmp_events ()
> > > filter_quiet_msgs ()
> > > {
> > > grep -v "Now migrate the VM (quiet)" |
> > > + grep -v "Begin continuous migration (quiet)" |
> > > + grep -v "End continuous migration (quiet)" |
> > > grep -v "Skipped VM migration (quiet)"
> > > }
> > > seen_migrate_msg ()
> > > {
> > > if [ $skip_migration -eq 1 ]; then
> > > - grep -q -e "Now migrate the VM" < $1
> > > + grep -q -e "Now migrate the VM" -e "Begin continuous migration" < $1
> > > else
> > > - grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
> > > + grep -q -e "Now migrate the VM" -e "Begin continuous migration" -e "Skipped VM migration" < $1
> > > fi
> > > }
> > > @@ -161,6 +163,7 @@ run_migration ()
> > > src_qmpout=/dev/null
> > > dst_qmpout=/dev/null
> > > skip_migration=0
> > > + continuous_migration=0
> > > mkfifo ${src_outfifo}
> > > mkfifo ${dst_outfifo}
> > > @@ -186,9 +189,12 @@ run_migration ()
> > > do_migration || return $?
> > > while ps -p ${live_pid} > /dev/null ; do
> > > - # Wait for test exit or further migration messages.
> > > - if ! seen_migrate_msg ${src_out} ; then
> > > + if [[ ${continuous_migration} -eq 1 ]] ; then
> >
> > Here you're using "[[" for testing ...
> >
> > > + do_migration || return $?
> > > + elif ! seen_migrate_msg ${src_out} ; then
> > > sleep 0.1
> > > + elif grep -q "Begin continuous migration" < ${src_out} ; then
> > > + do_migration || return $?
> > > elif grep -q "Now migrate the VM" < ${src_out} ; then
> > > do_migration || return $?
> > > elif [ $skip_migration -eq 0 ] && grep -q "Skipped VM migration" < ${src_out} ; then
> >
> > ... while the other code seems to use "[" for testing values. Can we try to
> > stick to one style, please (unless it's really required to use "[["
> > somewhere)?
> >
>
> We should decide on a Bash coding style and on preferences like [[ and
> then write a document for it, as well as create a set of shellcheck
> includes/excludes to test it. Then, using shellcheck we'd change all our
> current Bash code and also require shellcheck to pass on all new code
> before merge.
Seems like a good idea.
> Any volunteers for that effort? For the style selection
> we can take inspiration from other projects or even just adopt their
> style guides. Google has some guidance[1][2] and googling for Bash style
> pops up other hits.
>
> [1] https://google.github.io/styleguide/shellguide.html
> [2] https://chromium.googlesource.com/chromiumos/docs/+/master/styleguide/shell.md
My bash skills consit of mashing the keyboard until the errors quieten
down, so I may not be the best to decide on this stuff. I could take a
look at getting the checker running in make and post an RFC though. No
promises if it turns out to be harder than it looks...
Thanks,
Nick
More information about the Linuxppc-dev
mailing list