[PATCH] usb: gadget: fsl-udc: Replace custom log wrappers by pr_{err,warn,debug}
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Mar 4 23:11:53 AEDT 2024
The custom log wrappers ERR, WARNING and DBG don't add anything useful
that cannot easily be done with pr_err() and friends. Replace the custom
stuff by the well known functions from printk.h.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,
I didn't replace VDBG by pr_vdebug because the latter doesn't exist.
Alternatively all these macros could be replaced by
dev_{err,warn,dbg,vdbg}, which however would be a bigger change that
affects the output more.
Thoughts?
Best regards
Uwe
drivers/usb/gadget/udc/fsl_udc_core.c | 36 ++++++++++++++-------------
drivers/usb/gadget/udc/fsl_usb2_udc.h | 19 +++-----------
2 files changed, 23 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index e8042c158f6d..ebe611d4a7f9 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -15,6 +15,8 @@
#undef VERBOSE
+#define pr_fmt(x) "udc: " x
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
@@ -285,7 +287,7 @@ static int dr_controller_setup(struct fsl_udc *udc)
timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
if (time_after(jiffies, timeout)) {
- ERR("udc reset timeout!\n");
+ pr_err("udc reset timeout!\n");
return -ETIMEDOUT;
}
cpu_relax();
@@ -1105,7 +1107,7 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep)
/* Wait until flush complete */
while (fsl_readl(&dr_regs->endptflush)) {
if (time_after(jiffies, timeout)) {
- ERR("ep flush timeout\n");
+ pr_err("ep flush timeout\n");
return;
}
cpu_relax();
@@ -1543,7 +1545,7 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
udc->ep0_state = WAIT_FOR_SETUP;
break;
case WAIT_FOR_SETUP:
- ERR("Unexpected ep0 packets\n");
+ pr_err("Unexpected ep0 packets\n");
break;
default:
ep0stall(udc);
@@ -1612,7 +1614,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
errors = hc32_to_cpu(curr_td->size_ioc_sts);
if (errors & DTD_ERROR_MASK) {
if (errors & DTD_STATUS_HALTED) {
- ERR("dTD error %08x QH=%d\n", errors, pipe);
+ pr_err("dTD error %08x QH=%d\n", errors, pipe);
/* Clear the errors and Halt condition */
tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
tmp &= ~errors;
@@ -1631,7 +1633,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
status = -EILSEQ;
break;
} else
- ERR("Unknown error has occurred (0x%x)!\n",
+ pr_err("Unknown error has occurred (0x%x)!\n",
errors);
} else if (hc32_to_cpu(curr_td->size_ioc_sts)
@@ -1691,7 +1693,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
/* If the ep is configured */
if (!curr_ep->ep.name) {
- WARNING("Invalid EP?");
+ pr_warn("Invalid EP?\n");
continue;
}
@@ -1820,7 +1822,7 @@ static void reset_irq(struct fsl_udc *udc)
while (fsl_readl(&dr_regs->endpointprime)) {
/* Wait until all endptprime bits cleared */
if (time_after(jiffies, timeout)) {
- ERR("Timeout for reset\n");
+ pr_err("Timeout for reset\n");
break;
}
cpu_relax();
@@ -1958,7 +1960,7 @@ static int fsl_udc_start(struct usb_gadget *g,
udc_controller->transceiver->otg,
&udc_controller->gadget);
if (retval < 0) {
- ERR("can't bind to transceiver\n");
+ pr_err("can't bind to transceiver\n");
udc_controller->driver = NULL;
return retval;
}
@@ -2243,7 +2245,7 @@ static int struct_udc_setup(struct fsl_udc *udc,
udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL);
if (!udc->eps) {
- ERR("kmalloc udc endpoint status failed\n");
+ pr_err("kmalloc udc endpoint status failed\n");
goto eps_alloc_failed;
}
@@ -2258,7 +2260,7 @@ static int struct_udc_setup(struct fsl_udc *udc,
udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
&udc->ep_qh_dma, GFP_KERNEL);
if (!udc->ep_qh) {
- ERR("malloc QHs for udc failed\n");
+ pr_err("malloc QHs for udc failed\n");
goto ep_queue_alloc_failed;
}
@@ -2269,14 +2271,14 @@ static int struct_udc_setup(struct fsl_udc *udc,
udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
struct fsl_req, req);
if (!udc->status_req) {
- ERR("kzalloc for udc status request failed\n");
+ pr_err("kzalloc for udc status request failed\n");
goto udc_status_alloc_failed;
}
/* allocate a small amount of memory to get valid address */
udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
if (!udc->status_req->req.buf) {
- ERR("kzalloc for udc request buffer failed\n");
+ pr_err("kzalloc for udc request buffer failed\n");
goto udc_req_buf_alloc_failed;
}
@@ -2373,7 +2375,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
- ERR("Can't find OTG driver!\n");
+ pr_err("Can't find OTG driver!\n");
ret = -ENODEV;
goto err_kfree;
}
@@ -2389,7 +2391,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
if (pdata->operating_mode == FSL_USB2_DR_DEVICE) {
if (!request_mem_region(res->start, resource_size(res),
driver_name)) {
- ERR("request mem region for %s failed\n", pdev->name);
+ pr_err("request mem region for %s failed\n", pdev->name);
ret = -EBUSY;
goto err_kfree;
}
@@ -2420,7 +2422,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
/* Read Device Controller Capability Parameters register */
dccparams = fsl_readl(&dr_regs->dccparams);
if (!(dccparams & DCCPARAMS_DC)) {
- ERR("This SOC doesn't support device role\n");
+ pr_err("This SOC doesn't support device role\n");
ret = -ENODEV;
goto err_exit;
}
@@ -2438,14 +2440,14 @@ static int fsl_udc_probe(struct platform_device *pdev)
ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
driver_name, udc_controller);
if (ret != 0) {
- ERR("cannot request irq %d err %d\n",
+ pr_err("cannot request irq %d err %d\n",
udc_controller->irq, ret);
goto err_exit;
}
/* Initialize the udc structure including QH member and other member */
if (struct_udc_setup(udc_controller, pdev)) {
- ERR("Can't initialize udc data structure\n");
+ pr_err("Can't initialize udc data structure\n");
ret = -ENOMEM;
goto err_free_irq;
}
diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
index 2efc5a930b48..646bef64756e 100644
--- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -508,13 +508,6 @@ struct fsl_udc {
/*-------------------------------------------------------------------------*/
-#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \
- __func__, ## args)
-#else
-#define DBG(fmt, args...) do{}while(0)
-#endif
-
#if 0
static void dump_msg(const char *label, const u8 * buf, unsigned int length)
{
@@ -523,7 +516,7 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
if (length >= 512)
return;
- DBG("%s, length %u:\n", label, length);
+ pr_debug("[%s] %s, length %u:\n", __func__, label, length);
start = 0;
while (length > 0) {
num = min(length, 16u);
@@ -535,7 +528,7 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
p += 3;
}
*p = 0;
- printk(KERN_DEBUG "%6x: %s\n", start, line);
+ pr_debug("%6x: %s\n", start, line);
buf += num;
start += num;
length -= num;
@@ -544,15 +537,11 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
#endif
#ifdef VERBOSE
-#define VDBG DBG
+#define VDBG(fmt, args...) pr_debug("[%s] " fmt "\n", ## args)
#else
-#define VDBG(stuff...) do{}while(0)
+#define VDBG(fmt, args...) do {} while(0)
#endif
-#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARNING(stuff...) pr_warn("udc: " stuff)
-#define INFO(stuff...) pr_info("udc: " stuff)
-
/*-------------------------------------------------------------------------*/
/* ### Add board specific defines here
base-commit: 67908bf6954b7635d33760ff6dfc189fc26ccc89
--
2.43.0
More information about the Linuxppc-dev
mailing list