[PATCH v3 2/2] powerpc: hotplug driver bridge support

Krishna Kumar krishnak at linux.ibm.com
Mon Jun 24 22:09:28 AEST 2024


There is an issue with the hotplug operation when it's done on the
bridge/switch slot. The bridge-port and devices behind the bridge, which
become offline by hot-unplug operation, don't get hot-plugged/enabled by
doing hot-plug operation on that slot. Only the first port of the bridge
gets enabled and the remaining port/devices remain unplugged. The hot
plug/unplug operation is done by the hotplug driver
(drivers/pci/hotplug/pnv_php.c).

Root Cause Analysis: This behavior is due to missing code for the
switch/bridge. The existing driver depends on pci_hp_add_devices()
function for device enablement. This function calls pci_scan_slot() on
only one device-node/port of the bridge, not on all the siblings'
device-node/port.

The missing code needs to be added which will find all the sibling
device-nodes/bridge-ports and will run explicit pci_scan_slot() on
those.  A new function has been added for this purpose which gets
invoked from pci_hp_add_devices(). This new function
pci_traverse_sibling_nodes_and_scan_slot() gets all the sibling
bridge-ports by traversal and explicitly invokes pci_scan_slot on them.

Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Nicholas Piggin <npiggin at gmail.com>
Cc: Christophe Leroy <christophe.leroy at csgroup.eu>
Cc: "Aneesh Kumar K.V" <aneesh.kumar at kernel.org>
Cc: Bjorn Helgaas <bhelgaas at google.com>
Cc: Gaurav Batra <gbatra at linux.ibm.com>
Cc: Nathan Lynch <nathanl at linux.ibm.com>
Cc: Brian King <brking at linux.vnet.ibm.com>

Signed-off-by: Krishna Kumar <krishnak at linux.ibm.com>
---
 arch/powerpc/include/asm/ppc-pci.h |  4 ++++
 arch/powerpc/kernel/pci-hotplug.c  |  5 ++---
 arch/powerpc/kernel/pci_dn.c       | 32 ++++++++++++++++++++++++++++++
 3 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index a8b7e8682f5b..83db8d0798ac 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -28,6 +28,10 @@ struct pci_dn;
 void *pci_traverse_device_nodes(struct device_node *start,
 				void *(*fn)(struct device_node *, void *),
 				void *data);
+
+void pci_traverse_sibling_nodes_and_scan_slot(struct device_node *start,
+					       struct pci_bus *bus);
+
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
 
 #if defined(CONFIG_IOMMU_API) && (defined(CONFIG_PPC_PSERIES) || \
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 0fe251c6ac2c..639a3d592fe2 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -106,7 +106,7 @@ EXPORT_SYMBOL_GPL(pci_hp_remove_devices);
  */
 void pci_hp_add_devices(struct pci_bus *bus)
 {
-	int slotno, mode, max;
+	int mode, max;
 	struct pci_dev *dev;
 	struct pci_controller *phb;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
@@ -129,8 +129,7 @@ void pci_hp_add_devices(struct pci_bus *bus)
 		 * order for fully rescan all the way down to pick them up.
 		 * They can have been removed during partial hotplug.
 		 */
-		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-		pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+		pci_traverse_sibling_nodes_and_scan_slot(dn, bus);
 		max = bus->busn_res.start;
 		/*
 		 * Scan bridges that are already configured. We don't touch
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 38561d6a2079..bea612759832 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -493,4 +493,36 @@ static void pci_dev_pdn_setup(struct pci_dev *pdev)
 	pdn = pci_get_pdn(pdev);
 	pdev->dev.archdata.pci_data = pdn;
 }
+
+void pci_traverse_sibling_nodes_and_scan_slot(struct device_node *start, struct pci_bus *bus)
+{
+	struct device_node *dn;
+	int slotno;
+
+	u32 class = 0;
+
+	if (!of_property_read_u32(start->child, "class-code", &class)) {
+		/* Call of pci_scan_slot for non-bridge/EP case */
+		if (!((class >> 8) == PCI_CLASS_BRIDGE_PCI)) {
+			slotno = PCI_SLOT(PCI_DN(start->child)->devfn);
+			pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+			return;
+		}
+	}
+
+	/* Iterate all siblings */
+	for_each_child_of_node(start, dn) {
+		class = 0;
+
+		if (!of_property_read_u32(start->child, "class-code", &class)) {
+			/* Call of pci_scan_slot on each sibling-nodes/bridge-ports */
+			if ((class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+				slotno = PCI_SLOT(PCI_DN(dn)->devfn);
+				pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+			}
+		}
+	}
+
+}
+
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pci_dev_pdn_setup);
-- 
2.45.0



More information about the Linuxppc-dev mailing list