[kvm-unit-tests PATCH v10 08/15] powerpc: add pmu tests

[Thomas Huth]

On 12/06/2024 07.23, Nicholas Piggin wrote:
> Add some initial PMU testing.
> 
> - PMC5/6 tests
> - PMAE / PMI test
> - BHRB basic tests
> 
> Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
> ---
...
> diff --git a/powerpc/pmu.c b/powerpc/pmu.c
> new file mode 100644
> index 000000000..bdc45e167
> --- /dev/null
> +++ b/powerpc/pmu.c
> @@ -0,0 +1,562 @@
...
> +static void test_pmc5_with_ldat(void)
> +{
> +	unsigned long pmc5_1, pmc5_2;
> +	register unsigned long r4 asm("r4");
> +	register unsigned long r5 asm("r5");
> +	register unsigned long r6 asm("r6");
> +	uint64_t val;
> +
> +	reset_mmcr0();
> +	mtspr(SPR_PMC5, 0);
> +	mtspr(SPR_MMCR0, mfspr(SPR_MMCR0) & ~(MMCR0_FC | MMCR0_FC56));
> +	asm volatile(".rep 20 ; nop ; .endr" ::: "memory");
> +	mtspr(SPR_MMCR0, mfspr(SPR_MMCR0) | (MMCR0_FC | MMCR0_FC56));
> +	pmc5_1 = mfspr(SPR_PMC5);
> +
> +	val = 0xdeadbeef;
> +	r4 = 0;
> +	r5 = 0xdeadbeef;
> +	r6 = 100;
> +	reset_mmcr0();
> +	mtspr(SPR_PMC5, 0);
> +	mtspr(SPR_MMCR0, mfspr(SPR_MMCR0) & ~(MMCR0_FC | MMCR0_FC56));
> +	asm volatile(".rep 10 ; nop ; .endr ; ldat %0,%3,0x10 ; .rep 10 ; nop ; .endr" : "=r"(r4), "+r"(r5), "+r"(r6) : "r"(&val) :"memory");

Looks like older versions of Clang do not like this instruction:

  /tmp/pmu-4fda98.s: Assembler messages:
  /tmp/pmu-4fda98.s:1685: Error: unrecognized opcode: `ldat'
  clang-13: error: assembler command failed with exit code 1 (use -v to see 
invocation)

Could you please work-around that issue?

Also, please break the very long line here. Thanks!

> +	mtspr(SPR_MMCR0, mfspr(SPR_MMCR0) | (MMCR0_FC | MMCR0_FC56));
> +	pmc5_2 = mfspr(SPR_PMC5);
> +	assert(r4 == 0xdeadbeef);
> +	assert(val == 0xdeadbeef);
> +
> +	/* TCG does not count instructions around syscalls correctly */
> +	report_kfail(host_is_tcg, pmc5_1 != pmc5_2 + 1,
> +		     "PMC5 counts instructions with ldat");
> +}

  Thomas