[PATCH v3 2/6] powerpc/pseries/iommu: Fix the VFIO_IOMMU_SPAPR_TCE_GET_INFO ioctl output

Shivaprasad G Bhat sbhat at linux.ibm.com
Tue Jun 11 22:29:24 AEST 2024


The ioctl VFIO_IOMMU_SPAPR_TCE_GET_INFO is not reporting the
actuals on the platform as not all the details are correctly
collected during the platform probe/scan into the iommu_table_group.

Collect the information during the device setup time as the DMA
window property is already looked up on parent nodes anyway.

Signed-off-by: Shivaprasad G Bhat <sbhat at linux.ibm.com>
---
 arch/powerpc/platforms/pseries/iommu.c |   81 ++++++++++++++++++++++++++------
 1 file changed, 67 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 330c69830660..eebb8296d431 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -865,13 +865,6 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 				be32_to_cpu(prop.tce_shift), NULL,
 				&iommu_table_lpar_multi_ops);
 
-		/* Only for normal boot with default window. Doesn't matter even
-		 * if we set these with DDW which is 64bit during kdump, since
-		 * these will not be used during kdump.
-		 */
-		ppci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
-		ppci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
-
 		if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
 			panic("Failed to initialize iommu table");
 
@@ -1623,6 +1616,71 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	return direct_mapping;
 }
 
+static __u64 query_page_size_to_mask(u32 query_page_size)
+{
+	const long shift[] = {
+		(SZ_4K),   (SZ_64K), (SZ_16M),
+		(SZ_32M),  (SZ_64M), (SZ_128M),
+		(SZ_256M), (SZ_16G), (SZ_2M)
+	};
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(shift); i++) {
+		if (query_page_size & (1 << i))
+			ret |= shift[i];
+	}
+
+	return ret;
+}
+
+static void spapr_tce_init_table_group(struct pci_dev *pdev,
+				       struct device_node *pdn,
+				       struct dynamic_dma_window_prop prop)
+{
+	struct iommu_table_group  *table_group = PCI_DN(pdn)->table_group;
+	u32 ddw_avail[DDW_APPLICABLE_SIZE];
+
+	struct ddw_query_response query;
+	int ret;
+
+	/* Only for normal boot with default window. Doesn't matter during
+	 * kdump, since these will not be used during kdump.
+	 */
+	if (is_kdump_kernel())
+		return;
+
+	if (table_group->max_dynamic_windows_supported != 0)
+		return; /* already initialized */
+
+	table_group->tce32_start = be64_to_cpu(prop.dma_base);
+	table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
+
+	if (!of_find_property(pdn, "ibm,dma-window", NULL))
+		dev_err(&pdev->dev, "default dma window missing!\n");
+
+	ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable",
+			&ddw_avail[0], DDW_APPLICABLE_SIZE);
+	if (ret) {
+		table_group->max_dynamic_windows_supported = -1;
+		return;
+	}
+
+	ret = query_ddw(pdev, ddw_avail, &query, pdn);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: query_ddw failed\n", __func__);
+		table_group->max_dynamic_windows_supported = -1;
+		return;
+	}
+
+	if (query.windows_available == 0)
+		table_group->max_dynamic_windows_supported = 1;
+	else
+		table_group->max_dynamic_windows_supported = IOMMU_TABLE_GROUP_MAX_TABLES;
+
+	table_group->max_levels = 1;
+	table_group->pgsizes |= query_page_size_to_mask(query.page_size);
+}
+
 static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 {
 	struct device_node *pdn, *dn;
@@ -1662,13 +1720,6 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 				be32_to_cpu(prop.tce_shift), NULL,
 				&iommu_table_lpar_multi_ops);
 
-		/* Only for normal boot with default window. Doesn't matter even
-		 * if we set these with DDW which is 64bit during kdump, since
-		 * these will not be used during kdump.
-		 */
-		pci->table_group->tce32_start = be64_to_cpu(prop.dma_base);
-		pci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift);
-
 		iommu_init_table(tbl, pci->phb->node, 0, 0);
 		iommu_register_group(pci->table_group,
 				pci_domain_nr(pci->phb->bus), 0);
@@ -1677,6 +1728,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 		pr_debug("  found DMA window, table: %p\n", pci->table_group);
 	}
 
+	spapr_tce_init_table_group(dev, pdn, prop);
+
 	set_iommu_table_base(&dev->dev, pci->table_group->tables[0]);
 	iommu_add_device(pci->table_group, &dev->dev);
 }




More information about the Linuxppc-dev mailing list