[PATCH v12 08/84] KVM: x86/mmu: Mark page/folio accessed only when zapping leaf SPTEs

Sean Christopherson seanjc at google.com
Sat Jul 27 09:51:17 AEST 2024


Mark folios as accessed only when zapping leaf SPTEs, which is a rough
heuristic for "only in response to an mmu_notifier invalidation".  Page
aging and LRUs are tolerant of false negatives, i.e. KVM doesn't need to
be precise for correctness, and re-marking folios as accessed when zapping
entire roots or when zapping collapsible SPTEs is expensive and adds very
little value.

E.g. when a VM is dying, all of its memory is being freed; marking folios
accessed at that time provides no known value.  Similarly, because KVM
marks folios as accessed when creating SPTEs, marking all folios as
accessed when userspace happens to delete a memslot doesn't add value.
The folio was marked access when the old SPTE was created, and will be
marked accessed yet again if a vCPU accesses the pfn again after reloading
a new root.  Zapping collapsible SPTEs is a similar story; marking folios
accessed just because userspace disable dirty logging is a side effect of
KVM behavior, not a deliberate goal.

As an intermediate step, a.k.a. bisection point, towards *never* marking
folios accessed when dropping SPTEs, mark folios accessed when the primary
MMU might be invalidating mappings, as such zappings are not KVM initiated,
i.e. might actually be related to page aging and LRU activity.

Note, x86 is the only KVM architecture that "double dips"; every other
arch marks pfns as accessed only when mapping into the guest, not when
mapping into the guest _and_ when removing from the guest.

Signed-off-by: Sean Christopherson <seanjc at google.com>
---
 Documentation/virt/kvm/locking.rst | 76 +++++++++++++++---------------
 arch/x86/kvm/mmu/mmu.c             |  4 +-
 arch/x86/kvm/mmu/tdp_mmu.c         |  7 ++-
 3 files changed, 43 insertions(+), 44 deletions(-)

diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
index 02880d5552d5..8b3bb9fe60bf 100644
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -138,49 +138,51 @@ Then, we can ensure the dirty bitmaps is correctly set for a gfn.
 
 2) Dirty bit tracking
 
-In the origin code, the spte can be fast updated (non-atomically) if the
+In the original code, the spte can be fast updated (non-atomically) if the
 spte is read-only and the Accessed bit has already been set since the
 Accessed bit and Dirty bit can not be lost.
 
 But it is not true after fast page fault since the spte can be marked
 writable between reading spte and updating spte. Like below case:
 
-+------------------------------------------------------------------------+
-| At the beginning::                                                     |
-|                                                                        |
-|	spte.W = 0                                                       |
-|	spte.Accessed = 1                                                |
-+------------------------------------+-----------------------------------+
-| CPU 0:                             | CPU 1:                            |
-+------------------------------------+-----------------------------------+
-| In mmu_spte_clear_track_bits()::   |                                   |
-|                                    |                                   |
-|  old_spte = *spte;                 |                                   |
-|                                    |                                   |
-|                                    |                                   |
-|  /* 'if' condition is satisfied. */|                                   |
-|  if (old_spte.Accessed == 1 &&     |                                   |
-|       old_spte.W == 0)             |                                   |
-|     spte = 0ull;                   |                                   |
-+------------------------------------+-----------------------------------+
-|                                    | on fast page fault path::         |
-|                                    |                                   |
-|                                    |    spte.W = 1                     |
-|                                    |                                   |
-|                                    | memory write on the spte::        |
-|                                    |                                   |
-|                                    |    spte.Dirty = 1                 |
-+------------------------------------+-----------------------------------+
-|  ::                                |                                   |
-|                                    |                                   |
-|   else                             |                                   |
-|     old_spte = xchg(spte, 0ull)    |                                   |
-|   if (old_spte.Accessed == 1)      |                                   |
-|     kvm_set_pfn_accessed(spte.pfn);|                                   |
-|   if (old_spte.Dirty == 1)         |                                   |
-|     kvm_set_pfn_dirty(spte.pfn);   |                                   |
-|     OOPS!!!                        |                                   |
-+------------------------------------+-----------------------------------+
++-------------------------------------------------------------------------+
+| At the beginning::                                                      |
+|                                                                         |
+|	spte.W = 0                                                              |
+|	spte.Accessed = 1                                                       |
++-------------------------------------+-----------------------------------+
+| CPU 0:                              | CPU 1:                            |
++-------------------------------------+-----------------------------------+
+| In mmu_spte_update()::              |                                   |
+|                                     |                                   |
+|  old_spte = *spte;                  |                                   |
+|                                     |                                   |
+|                                     |                                   |
+|  /* 'if' condition is satisfied. */ |                                   |
+|  if (old_spte.Accessed == 1 &&      |                                   |
+|       old_spte.W == 0)              |                                   |
+|     spte = new_spte;                |                                   |
++-------------------------------------+-----------------------------------+
+|                                     | on fast page fault path::         |
+|                                     |                                   |
+|                                     |    spte.W = 1                     |
+|                                     |                                   |
+|                                     | memory write on the spte::        |
+|                                     |                                   |
+|                                     |    spte.Dirty = 1                 |
++-------------------------------------+-----------------------------------+
+|  ::                                 |                                   |
+|                                     |                                   |
+|   else                              |                                   |
+|     old_spte = xchg(spte, new_spte);|                                   |
+|   if (old_spte.Accessed &&          |                                   |
+|       !new_spte.Accessed)           |                                   |
+|     flush = true;                   |                                   |
+|   if (old_spte.Dirty &&             |                                   |
+|       !new_spte.Dirty)              |                                   |
+|     flush = true;                   |                                   |
+|     OOPS!!!                         |                                   |
++-------------------------------------+-----------------------------------+
 
 The Dirty bit is lost in this case.
 
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 2e6daa6d1cc0..58b70328b20c 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -542,10 +542,8 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
 	 * to guarantee consistency between TLB and page tables.
 	 */
 
-	if (is_accessed_spte(old_spte) && !is_accessed_spte(new_spte)) {
+	if (is_accessed_spte(old_spte) && !is_accessed_spte(new_spte))
 		flush = true;
-		kvm_set_pfn_accessed(spte_to_pfn(old_spte));
-	}
 
 	if (is_dirty_spte(old_spte) && !is_dirty_spte(new_spte))
 		flush = true;
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index 7ac43d1ce918..d1de5f28c445 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -520,10 +520,6 @@ static void handle_changed_spte(struct kvm *kvm, int as_id, gfn_t gfn,
 	if (was_present && !was_leaf &&
 	    (is_leaf || !is_present || WARN_ON_ONCE(pfn_changed)))
 		handle_removed_pt(kvm, spte_to_child_pt(old_spte, level), shared);
-
-	if (was_leaf && is_accessed_spte(old_spte) &&
-	    (!is_present || !is_accessed_spte(new_spte) || pfn_changed))
-		kvm_set_pfn_accessed(spte_to_pfn(old_spte));
 }
 
 static inline int __must_check __tdp_mmu_set_spte_atomic(struct tdp_iter *iter,
@@ -865,6 +861,9 @@ static bool tdp_mmu_zap_leafs(struct kvm *kvm, struct kvm_mmu_page *root,
 
 		tdp_mmu_iter_set_spte(kvm, &iter, SHADOW_NONPRESENT_VALUE);
 
+		if (is_accessed_spte(iter.old_spte))
+			kvm_set_pfn_accessed(spte_to_pfn(iter.old_spte));
+
 		/*
 		 * Zappings SPTEs in invalid roots doesn't require a TLB flush,
 		 * see kvm_tdp_mmu_zap_invalidated_roots() for details.
-- 
2.46.0.rc1.232.g9752f9e123-goog



More information about the Linuxppc-dev mailing list