[PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29
Damien Stewart
gvdecor at yahoo.com.au
Tue Jul 9 13:46:19 AEST 2024
Hello.
> How does it fail? I've repeatedly asked for dmesg outputs
> for working and non-working configurations.
I am the alleged tester. Attached are two dmesg logs. First one fails. Second passes with 2nd IRQ patch. Also attached is device tree blob if I've followed the correct command.
The good log is direct from dmesg. But the bad log is collected live over serial, since it ends up in kernel panic, with no where to save it.
--
My regards, Damien Stewart.
Green Valley Decorators.
-------------- next part --------------
[ 0.000000] hash-mmu: Page sizes from device-tree:
[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=3
[ 0.000000] hash-mmu: base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000, tlbiel=0, penc=31
[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
[ 0.000000] Using 1TB segments
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 6.10.0-rc6-powerpc64-smp (christian at lx-cce) (powerpc-linux-gnu-gcc (Debian 9.5.0-1) 9.5.0, GNU ld (GNU Binutils for Debian) 2.42) #1 SMP Thu Jul 4 18:40:38 CEST 2024
[ 0.000000] IOBMAP L2 allocated at: (____ptrval____)
[ 0.000000] ioremap() called early from .iommu_init_early_pasemi+0xec/0x260. Use early_ioremap() instead
[ 0.000000] Hardware name: pasemi,nemo PA6T 0x900102 A-EON Amigaone X1000
[ 0.000000] Found legacy serial port 0 for /pxp at 0,e0000000/serial at 1d
[ 0.000000] port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
[ 0.000000] Found legacy serial port 1 for /pxp at 0,e0000000/serial at 1d,1
[ 0.000000] port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Allocated 2320 bytes for 2 pacas
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x100000000
[ 0.000000] dcache_bsize = 0x40
[ 0.000000] icache_bsize = 0x40
[ 0.000000] cpu_features = 0x0000010000401182
[ 0.000000] possible = 0x001ffbebffffb18f
[ 0.000000] always = 0x0000000000000180
[ 0.000000] cpu_user_features = 0xdc000802 0x00000000
[ 0.000000] mmu_features = 0x6e000001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] vmalloc start = 0xc0003d0000000000
[ 0.000000] IO start = 0xc0003e0000000000
[ 0.000000] vmemmap start = 0xc0003f0000000000
[ 0.000000] hash-mmu: ppc64_pft_size = 0x0
[ 0.000000] hash-mmu: htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from .pas_setup_arch+0x3c/0x58. Use early_ioremap() instead
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] barrier-nospec: patched 427 locations
[ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] percpu: Embedded 27 pages/cpu s70952 r0 d39640 u524288
[ 0.000000] pcpu-alloc: s70952 r0 d39640 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Kernel command line: console=tty0 root=/dev/sdb3
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3986488K/4194304K available (23556K kernel code, 3248K rwdata, 10600K rodata, 9476K init, 671K bss, 207816K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 57793 entries in 340 pages
[ 0.000000] ftrace: allocated 339 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs
[ 0.000000] mpic: ISU size: 1024, shift: 10, mask: 3ff
[ 0.000000] mpic: Initializing for 1024 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 66.666666 MHz
[ 0.000000] time_init: processor frequency = 1800.000000 MHz
[ 0.000002] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns
[ 0.000008] clocksource: timebase mult[f000003] shift[24] registered
[ 0.000019] clockevent: decrementer mult[1111110e] shift[32] cpu[0]
[ 0.000124] Console: colour dummy device 80x25
[ 0.000133] printk: legacy console [tty0] enabled
[ 0.000433] pid_max: default: 32768 minimum: 301
[ 0.000512] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000546] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001050] mpic: requesting IPIs...
[ 0.001701] rcu: Hierarchical SRCU implementation.
[ 0.001714] rcu: Max phase no-delay instances is 400.
[ 0.002004] smp: Bringing up secondary CPUs ...
[ 0.002426] smp: Brought up 1 node, 2 CPUs
[ 0.003018] devtmpfs: initialized
[ 0.006765] Found PA-PXP PCI host bridge.
[ 0.006777] PCI host bridge /pxp at 0,e0000000 (primary) ranges:
[ 0.006810] IO 0x00000000fc800000..0x00000000fcffffff -> 0x0000000000000000
[ 0.006828] MEM 0x0000000080000000..0x00000000e00fffff -> 0x0000000080000000
[ 0.006844] MEM 0x00000000fd800000..0x00000000fd800fff -> 0x00000000fd800000
[ 0.006858] MEM 0x0000080000000000..0x00000bffffffffff -> 0x0000080000000000
[ 0.006879] no ISA IO ranges or unexpected isa range, mapping 64k
[ 0.006890] ISA bridge (early) is /pxp at 0,e0000000/io-bridge at 0
[ 0.007042] i8259 legacy interrupt controller initialized
[ 0.007132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007155] futex hash table entries: 512 (order: 4, 65536 bytes, linear)
[ 0.007510] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.008112] thermal_sys: Registered thermal governor 'step_wise'
[ 0.012169] HugeTLB: registered 16.0 MiB page size, pre-allocated 0 pages
[ 0.012190] HugeTLB: 0 KiB vmemmap can be freed for a 16.0 MiB page
[ 0.029149] raid6: altivecx8 gen() 4693 MB/s
[ 0.046201] raid6: altivecx4 gen() 4694 MB/s
[ 0.063251] raid6: altivecx2 gen() 4284 MB/s
[ 0.080302] raid6: altivecx1 gen() 3852 MB/s
[ 0.097360] raid6: int64x8 gen() 2046 MB/s
[ 0.114411] raid6: int64x4 gen() 2548 MB/s
[ 0.131458] raid6: int64x2 gen() 2269 MB/s
[ 0.148518] raid6: int64x1 gen() 1602 MB/s
[ 0.148527] raid6: using algorithm altivecx4 gen() 4694 MB/s
[ 0.148536] raid6: using intx1 recovery algorithm
[ 0.148821] SCSI subsystem initialized
[ 0.149676] libata version 3.00 loaded.
[ 0.149792] usbcore: registered new interface driver usbfs
[ 0.149822] usbcore: registered new interface driver hub
[ 0.149849] usbcore: registered new device driver usb
[ 0.149974] EDAC MC: Ver: 3.0.0
[ 0.150205] Advanced Linux Sound Architecture Driver Initialized.
[ 0.150687] PCI: Probing PCI hardware
[ 0.152010] PCI host bridge to bus 0000:00
[ 0.152027] pci_bus 0000:00: root bus resource [io 0x80000-0x87ffff] (bus address [0x0000-0x7fffff])
[ 0.152044] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe00fffff]
[ 0.152056] pci_bus 0000:00: root bus resource [mem 0xfd800000-0xfd800fff]
[ 0.152068] pci_bus 0000:00: root bus resource [mem 0x80000000000-0xbffffffffff]
[ 0.152081] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.152092] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.152127] NEMO SB600 IOB base e0000000
[ 0.152166] pci 0000:00:00.0: [1959:a001] type 00 class 0x060000 conventional PCI endpoint
[ 0.152291] ISA bridge PCI attached: 0000:00:00.0
[ 0.152340] pci 0000:00:01.0: [1959:a009] type 00 class 0x058000 conventional PCI endpoint
[ 0.152527] pci 0000:00:03.0: [1959:a00c] type 00 class 0x080080 conventional PCI endpoint
[ 0.152679] pci 0000:00:04.0: [1959:a00a] type 00 class 0x050000 conventional PCI endpoint
[ 0.152834] pci 0000:00:05.0: [1959:a00a] type 00 class 0x050000 conventional PCI endpoint
[ 0.153041] pci 0000:00:08.0: [1959:a000] type 00 class 0x0b2000 conventional PCI endpoint
[ 0.153185] pci 0000:00:09.0: [1959:a000] type 00 class 0x0b2000 conventional PCI endpoint
[ 0.153478] pci 0000:00:10.0: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.153510] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.153524] pci 0000:00:10.0: bridge window [io 0x82000-0x82fff]
[ 0.153538] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.153559] pci 0000:00:10.0: enabling Extended Tags
[ 0.153606] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.153768] pci 0000:00:10.1: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.153800] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.153823] pci 0000:00:10.1: enabling Extended Tags
[ 0.153868] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.154006] pci 0000:00:10.2: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.154037] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.154060] pci 0000:00:10.2: enabling Extended Tags
[ 0.154105] pci 0000:00:10.2: PME# supported from D0 D3hot D3cold
[ 0.154242] pci 0000:00:10.3: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.154274] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.154297] pci 0000:00:10.3: enabling Extended Tags
[ 0.154341] pci 0000:00:10.3: PME# supported from D0 D3hot D3cold
[ 0.154479] pci 0000:00:11.0: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.154510] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.154523] pci 0000:00:11.0: bridge window [io 0x80000-0x83fff]
[ 0.154536] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.154557] pci 0000:00:11.0: enabling Extended Tags
[ 0.154601] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 0.154774] pci 0000:00:11.1: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.154806] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.154830] pci 0000:00:11.1: enabling Extended Tags
[ 0.154874] pci 0000:00:11.1: PME# supported from D0 D3hot D3cold
[ 0.155014] pci 0000:00:11.2: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.155045] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.155068] pci 0000:00:11.2: enabling Extended Tags
[ 0.155112] pci 0000:00:11.2: PME# supported from D0 D3hot D3cold
[ 0.155250] pci 0000:00:11.3: [1959:a002] type 01 class 0x060400 PCIe Root Port
[ 0.155281] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.155304] pci 0000:00:11.3: enabling Extended Tags
[ 0.155348] pci 0000:00:11.3: PME# supported from D0 D3hot D3cold
[ 0.155549] pci 0000:00:14.0: [1959:a005] type 00 class 0x020000 conventional PCI endpoint
[ 0.155692] pci 0000:00:14.1: [1959:a005] type 00 class 0x020000 conventional PCI endpoint
[ 0.155829] pci 0000:00:14.2: [1959:a005] type 00 class 0x020000 conventional PCI endpoint
[ 0.155952] pci 0000:00:14.3: [1959:a005] type 00 class 0x020000 conventional PCI endpoint
[ 0.156104] pci 0000:00:15.0: [1959:a006] type 00 class 0x020000 conventional PCI endpoint
[ 0.156249] pci 0000:00:15.1: [1959:a006] type 00 class 0x020000 conventional PCI endpoint
[ 0.156486] pci 0000:00:1a.0: [1959:a007] type 00 class 0x0801ff conventional PCI endpoint
[ 0.156647] pci 0000:00:1b.0: [1959:a00b] type 00 class 0x088000 conventional PCI endpoint
[ 0.156803] pci 0000:00:1c.0: [1959:a003] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.156829] pci 0000:00:1c.0: BAR 0 [io 0x870200-0x87023f]
[ 0.156959] pci 0000:00:1c.1: [1959:a003] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.156984] pci 0000:00:1c.1: BAR 0 [io 0x870240-0x87027f]
[ 0.157114] pci 0000:00:1c.2: [1959:a003] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.157139] pci 0000:00:1c.2: BAR 0 [io 0x870280-0x8702bf]
[ 0.157274] pci 0000:00:1d.0: [1959:a004] type 00 class 0x070003 conventional PCI endpoint
[ 0.157299] pci 0000:00:1d.0: BAR 0 [io 0x8703f8-0x8703ff]
[ 0.157426] pci 0000:00:1d.1: [1959:a004] type 00 class 0x070003 conventional PCI endpoint
[ 0.157451] pci 0000:00:1d.1: BAR 0 [io 0x8702f8-0x8702ff]
[ 0.157601] pci 0000:00:1e.0: [1959:a008] type 00 class 0x0601ff conventional PCI endpoint
[ 0.157626] pci 0000:00:1e.0: BAR 0 [io 0x870400-0x8704ff]
[ 0.157640] pci 0000:00:1e.0: BAR 1 [io 0x870500-0x8705ff]
[ 0.196680] IOMMU table initialized, virtual merging enabled
[ 0.196833] pci 0000:01:00.0: [1002:6610] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.196866] pci 0000:01:00.0: BAR 0 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.196888] pci 0000:01:00.0: BAR 2 [mem 0xa0000000-0xa003ffff 64bit]
[ 0.196904] pci 0000:01:00.0: BAR 4 [io 0x82000-0x820ff]
[ 0.196925] pci 0000:01:00.0: ROM [mem 0xa0040000-0xa005ffff pref]
[ 0.196942] pci 0000:01:00.0: enabling Extended Tags
[ 0.197016] pci 0000:01:00.0: supports D1 D2
[ 0.197026] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.197062] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:10.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.197250] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.197280] pci 0000:01:00.1: BAR 0 [mem 0xa0060000-0xa0063fff 64bit]
[ 0.197323] pci 0000:01:00.1: enabling Extended Tags
[ 0.197381] pci 0000:01:00.1: supports D1 D2
[ 0.200661] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.201510] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.202343] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.203172] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.203715] pci 0000:05:12.0: [1002:4380] type 00 class 0x01018f conventional PCI endpoint
[ 0.203748] pci 0000:05:12.0: BAR 0 [io 0x81040-0x81047]
[ 0.203766] pci 0000:05:12.0: BAR 1 [io 0x8105c-0x8105f]
[ 0.203784] pci 0000:05:12.0: BAR 2 [io 0x81048-0x8104f]
[ 0.203801] pci 0000:05:12.0: BAR 3 [io 0x81058-0x8105b]
[ 0.203818] pci 0000:05:12.0: BAR 4 [io 0x81010-0x8101f]
[ 0.203836] pci 0000:05:12.0: BAR 5 [mem 0xa0209000-0xa02093ff]
[ 0.203867] pci 0000:05:12.0: set SATA to AHCI mode
[ 0.204038] pci 0000:05:13.0: [1002:4387] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.204070] pci 0000:05:13.0: BAR 0 [mem 0xa0207000-0xa0207fff]
[ 0.204238] pci 0000:05:13.1: [1002:4388] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.204268] pci 0000:05:13.1: BAR 0 [mem 0xa0208000-0xa0208fff]
[ 0.204435] pci 0000:05:13.2: [1002:4389] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.204466] pci 0000:05:13.2: BAR 0 [mem 0xa0206000-0xa0206fff]
[ 0.204633] pci 0000:05:13.3: [1002:438a] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.204665] pci 0000:05:13.3: BAR 0 [mem 0xa0204000-0xa0204fff]
[ 0.204832] pci 0000:05:13.4: [1002:438b] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.204863] pci 0000:05:13.4: BAR 0 [mem 0xa0205000-0xa0205fff]
[ 0.205048] pci 0000:05:13.5: [1002:4386] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.205079] pci 0000:05:13.5: BAR 0 [mem 0xa0209800-0xa02098ff]
[ 0.205171] pci 0000:05:13.5: supports D1 D2
[ 0.205181] pci 0000:05:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.205311] pci 0000:05:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.205341] pci 0000:05:14.0: BAR 0 [io 0x81020-0x8102f]
[ 0.205358] pci 0000:05:14.0: BAR 1 [mem 0xa0209400-0xa02097ff]
[ 0.205522] pci 0000:05:14.1: [1002:438c] type 00 class 0x010183 conventional PCI endpoint
[ 0.205553] pci 0000:05:14.1: BAR 0 [io 0x81030-0x81037]
[ 0.205571] pci 0000:05:14.1: BAR 1 [io 0x81054-0x81057]
[ 0.205589] pci 0000:05:14.1: BAR 2 [io 0x81038-0x8103f]
[ 0.205606] pci 0000:05:14.1: BAR 3 [io 0x81050-0x81053]
[ 0.205623] pci 0000:05:14.1: BAR 4 [io 0x81000-0x8100f]
[ 0.205652] pci 0000:05:14.1: BAR 2 [io 0x80170-0x80177]: legacy IDE quirk
[ 0.205663] pci 0000:05:14.1: BAR 3 [io 0x80376]: legacy IDE quirk
[ 0.205792] pci 0000:05:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
[ 0.205827] pci 0000:05:14.2: BAR 0 [mem 0xa0200000-0xa0203fff 64bit]
[ 0.205906] pci 0000:05:14.2: PME# supported from D0 D3hot D3cold
[ 0.206039] pci 0000:05:14.3: [1002:438d] type 00 class 0x060100 conventional PCI endpoint
[ 0.206230] pci 0000:05:14.4: [1002:4384] type 01 class 0x060400 conventional PCI bridge
[ 0.206276] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.206291] pci 0000:05:14.4: bridge window [io 0x83000-0x83fff]
[ 0.206305] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.206701] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.206737] pci_bus 0000:06: extended config space not accessible
[ 0.206961] pci 0000:06:06.0: [10ec:8139] type 00 class 0x020000 conventional PCI endpoint
[ 0.206998] pci 0000:06:06.0: BAR 0 [io 0x83000-0x830ff]
[ 0.207019] pci 0000:06:06.0: BAR 1 [mem 0xa0300000-0xa03000ff]
[ 0.207796] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.208643] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.209478] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.210312] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.210361] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.210537] PCI 0000:00 Cannot reserve Legacy IO [io 0x80000-0x80fff]
[ 0.210552] pci 0000:00:10.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.210581] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-06] add_size 200000 add_align 100000
[ 0.210601] pci 0000:00:11.1: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.210616] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.210634] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 0.210651] pci 0000:00:11.2: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.210665] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 0.210683] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[ 0.210701] pci 0000:00:11.3: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 0.210715] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[ 0.210733] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
[ 0.210774] pci 0000:00:10.0: bridge window [mem 0x80000000000-0x800001fffff 64bit pref]: assigned
[ 0.210794] pci 0000:00:11.0: bridge window [mem 0x80000200000-0x800003fffff 64bit pref]: assigned
[ 0.210809] pci 0000:00:11.1: bridge window [mem 0x80000000-0x801fffff]: assigned
[ 0.210823] pci 0000:00:11.1: bridge window [mem 0x80000400000-0x800005fffff 64bit pref]: assigned
[ 0.210837] pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]: assigned
[ 0.210851] pci 0000:00:11.2: bridge window [mem 0x80000600000-0x800007fffff 64bit pref]: assigned
[ 0.210866] pci 0000:00:11.3: bridge window [mem 0x80400000-0x805fffff]: assigned
[ 0.210879] pci 0000:00:11.3: bridge window [mem 0x80000800000-0x800009fffff 64bit pref]: assigned
[ 0.210894] pci 0000:00:11.1: bridge window [io 0x84000-0x84fff]: assigned
[ 0.210906] pci 0000:00:11.2: bridge window [io 0x85000-0x85fff]: assigned
[ 0.210918] pci 0000:00:11.3: bridge window [io 0x86000-0x86fff]: assigned
[ 0.210938] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.210950] pci 0000:00:10.0: bridge window [io 0x82000-0x82fff]
[ 0.210963] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.210976] pci 0000:00:10.0: bridge window [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.210991] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.211004] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.211025] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.211043] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.211055] pci 0000:05:14.4: bridge window [io 0x83000-0x83fff]
[ 0.211069] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.211086] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.211097] pci 0000:00:11.0: bridge window [io 0x80000-0x83fff]
[ 0.211109] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.211122] pci 0000:00:11.0: bridge window [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.211136] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.211147] pci 0000:00:11.1: bridge window [io 0x84000-0x84fff]
[ 0.211159] pci 0000:00:11.1: bridge window [mem 0x80000000-0x801fffff]
[ 0.211172] pci 0000:00:11.1: bridge window [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.211186] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.211197] pci 0000:00:11.2: bridge window [io 0x85000-0x85fff]
[ 0.211209] pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]
[ 0.211221] pci 0000:00:11.2: bridge window [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.211236] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.211247] pci 0000:00:11.3: bridge window [io 0x86000-0x86fff]
[ 0.211259] pci 0000:00:11.3: bridge window [mem 0x80400000-0x805fffff]
[ 0.211271] pci 0000:00:11.3: bridge window [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.211289] pci_bus 0000:00: resource 4 [io 0x80000-0x87ffff]
[ 0.211301] pci_bus 0000:00: resource 5 [mem 0x80000000-0xe00fffff]
[ 0.211312] pci_bus 0000:00: resource 6 [mem 0xfd800000-0xfd800fff]
[ 0.211324] pci_bus 0000:00: resource 7 [mem 0x80000000000-0xbffffffffff]
[ 0.211336] pci_bus 0000:01: resource 0 [io 0x82000-0x82fff]
[ 0.211347] pci_bus 0000:01: resource 1 [mem 0x90000000-0xa00fffff]
[ 0.211358] pci_bus 0000:01: resource 2 [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.211372] pci_bus 0000:05: resource 0 [io 0x80000-0x83fff]
[ 0.211383] pci_bus 0000:05: resource 1 [mem 0xa0100000-0xa03fffff]
[ 0.211394] pci_bus 0000:05: resource 2 [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.211407] pci_bus 0000:06: resource 0 [io 0x83000-0x83fff]
[ 0.211418] pci_bus 0000:06: resource 1 [mem 0xa0300000-0xa03fffff]
[ 0.211430] pci_bus 0000:07: resource 0 [io 0x84000-0x84fff]
[ 0.211441] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff]
[ 0.211452] pci_bus 0000:07: resource 2 [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.211465] pci_bus 0000:08: resource 0 [io 0x85000-0x85fff]
[ 0.211476] pci_bus 0000:08: resource 1 [mem 0x80200000-0x803fffff]
[ 0.211487] pci_bus 0000:08: resource 2 [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.211500] pci_bus 0000:09: resource 0 [io 0x86000-0x86fff]
[ 0.211511] pci_bus 0000:09: resource 1 [mem 0x80400000-0x805fffff]
[ 0.211522] pci_bus 0000:09: resource 2 [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.212326] PCI: Probing PCI hardware done
[ 0.212640] clocksource: Switched to clocksource timebase
[ 0.212834] VFS: Disk quotas dquot_6.6.0
[ 0.212857] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.217709] NET: Registered PF_INET protocol family
[ 0.217984] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.220335] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.220370] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.220385] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.220536] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.220964] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.221043] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.221100] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.221224] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.221512] RPC: Registered named UNIX socket transport module.
[ 0.221526] RPC: Registered udp transport module.
[ 0.221534] RPC: Registered tcp transport module.
[ 0.221541] RPC: Registered tcp-with-tls transport module.
[ 0.221549] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.222901] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.222928] pci 0000:05:13.0: avoiding MSI to work around a hardware defect
[ 0.222990] pci 0000:05:13.1: avoiding MSI to work around a hardware defect
[ 0.223052] pci 0000:05:13.2: avoiding MSI to work around a hardware defect
[ 0.223092] pci 0000:05:13.3: avoiding MSI to work around a hardware defect
[ 0.223130] pci 0000:05:13.4: avoiding MSI to work around a hardware defect
[ 0.223169] pci 0000:05:13.5: avoiding MSI to work around a hardware defect
[ 0.223930] PCI: CLS 64 bytes, default 128
[ 0.224939] OF: /localbus at f0000000/cf at 1000000: could not find phandle 14
[ 0.224964] OF: /localbus at f0000000/cf at 1000000: could not find phandle 1
[ 0.224984] OF: /localbus at f0000000/cf at 1000000: could not find phandle 10
[ 0.225003] OF: /localbus at f0000000/cf at 1000000: could not find phandle 11
[ 0.230249] Initialise system trusted keyrings
[ 0.230838] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.231160] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.231458] NFS: Registering the id_resolver key type
[ 0.231482] Key type id_resolver registered
[ 0.231490] Key type id_legacy registered
[ 0.231508] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.231518] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.232072] Key type cifs.idmap registered
[ 0.232322] ntfs3: Read-only LZX/Xpress compression included
[ 0.232469] fuse: init (API version 7.40)
[ 0.232806] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, fatal assert, debug enabled
[ 0.233363] 9p: Installing v9fs 9p2000 file system support
[ 0.270938] xor: measuring software checksum speed
[ 0.273665] 8regs : 3637 MB/sec
[ 0.277000] 8regs_prefetch : 2960 MB/sec
[ 0.279713] 32regs : 3642 MB/sec
[ 0.282783] 32regs_prefetch : 3215 MB/sec
[ 0.284367] altivec : 6277 MB/sec
[ 0.284377] xor: using function: altivec (6277 MB/sec)
[ 0.284387] Key type asymmetric registered
[ 0.284396] Asymmetric key parser 'x509' registered
[ 0.284490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.284506] io scheduler mq-deadline registered
[ 0.284514] io scheduler kyber registered
[ 0.284537] io scheduler bfq registered
[ 0.288387] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.290646] serial8250.0: ttyS0 at I/O 0x8703f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.291247] serial8250.0: ttyS1 at I/O 0x8702f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.292684] 0000:00:1d.0: ttyS0 at I/O 0x8703f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.293786] 0000:00:1d.1: ttyS1 at I/O 0x8702f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.294218] Registering PA Semi RNG
[ 0.294310] random: crng init done
[ 0.294446] Linux agpgart interface v0.103
[ 0.294682] [drm] radeon kernel modesetting enabled.
[ 0.295191] [drm] initializing kernel modesetting (OLAND 0x1002:0x6610 0x174B:0xE269 0x87).
[ 0.623657] ATOM BIOS: C66201
[ 0.623798] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 0.623818] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 0.623830] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 0.623839] [drm] RAM width 128bits DDR
[ 0.623848] radeon 0000:01:00.0: dma_iommu_get_required_mask: returning bypass mask 0x1ffffffff
[ 0.624129] [drm] radeon: 2048M of VRAM memory ready
[ 0.624143] [drm] radeon: 2048M of GTT memory ready.
[ 0.624168] [drm] Loading oland Microcode
[ 0.624205] [drm] Internal thermal controller with fan control
[ 0.637729] [drm] radeon: dpm initialized
[ 0.637783] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 0.684298] [drm] PCIE GART of 2048M enabled (table at 0x0000000000165000).
[ 0.684481] radeon 0000:01:00.0: WB enabled
[ 0.684495] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 0.684509] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 0.684521] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 0.684533] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 0.684545] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 0.697872] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 0.698037] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 0.698096] [drm] radeon: irq initialized.
[ 0.806549] [drm] ring test on 0 succeeded in 1 usecs
[ 0.806577] [drm] ring test on 1 succeeded in 1 usecs
[ 0.806590] [drm] ring test on 2 succeeded in 1 usecs
[ 0.806607] [drm] ring test on 3 succeeded in 3 usecs
[ 0.806636] [drm] ring test on 4 succeeded in 2 usecs
[ 0.982143] [drm] ring test on 5 succeeded in 2 usecs
[ 0.982160] [drm] UVD initialized successfully.
[ 0.982671] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.982721] [drm] ib test on ring 1 succeeded in 0 usecs
[ 0.982762] [drm] ib test on ring 2 succeeded in 0 usecs
[ 0.982804] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.982842] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.145654] [drm:.uvd_v1_0_ib_test] *ERROR* radeon: fence wait timed out.
[ 2.145683] [drm:.radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-110).
[ 2.146366] [drm] Radeon Display Connectors
[ 2.146378] [drm] Connector 0:
[ 2.146385] [drm] HDMI-A-1
[ 2.146391] [drm] HPD1
[ 2.146397] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.146409] [drm] Encoders:
[ 2.146416] [drm] DFP1: INTERNAL_UNIPHY
[ 2.146423] [drm] Connector 1:
[ 2.146429] [drm] DVI-D-1
[ 2.146435] [drm] HPD2
[ 2.146441] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.146453] [drm] Encoders:
[ 2.146459] [drm] DFP2: INTERNAL_UNIPHY
[ 2.146466] [drm] Connector 2:
[ 2.146472] [drm] VGA-1
[ 2.146478] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 2.146490] [drm] Encoders:
[ 2.146496] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.148153] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 2.297319] [drm] fb mappable at 0x90571000
[ 2.297333] [drm] vram apper at 0x90000000
[ 2.297341] [drm] size 8294400
[ 2.297348] [drm] fb depth is 24
[ 2.297354] [drm] pitch is 7680
[ 2.536227] Console: switching to colour frame buffer device 240x67
[ 2.644391] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[ 2.652019] loop: module loaded
[ 2.652279] mpt3sas version 48.100.00.00 loaded
[ 2.654293] ahci 0000:05:12.0: version 3.0
[ 2.654348] ahci 0000:05:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.654856] ahci 0000:05:12.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[ 2.655351] ahci 0000:05:12.0: 4/4 ports implemented (port mask 0xf)
[ 2.655729] ahci 0000:05:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.658031] scsi host0: ahci
[ 2.658571] scsi host1: ahci
[ 2.659111] scsi host2: ahci
[ 2.659668] scsi host3: ahci
[ 2.659959] ata1: SATA max UDMA/133 abar m1024 at 0xa0209000 port 0xa0209100 irq 9 lpm-pol 0
[ 2.660466] ata2: SATA max UDMA/133 abar m1024 at 0xa0209000 port 0xa0209180 irq 9 lpm-pol 0
[ 2.660976] ata3: SATA max UDMA/133 abar m1024 at 0xa0209000 port 0xa0209200 irq 9 lpm-pol 0
[ 2.661477] ata4: SATA max UDMA/133 abar m1024 at 0xa0209000 port 0xa0209280 irq 9 lpm-pol 0
[ 2.662983] scsi host4: pata_atiixp
[ 2.663771] scsi host5: pata_atiixp
[ 2.664126] ata5: PATA max UDMA/100 cmd 0x81030 ctl 0x81054 bmdma 0x81000 irq 9 lpm-pol 0
[ 2.664645] ata6: DUMMY
[ 2.667948] PA Semi PWRficient DMA library initialized (20 tx, 64 rx channels)
[ 2.677439] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 2.677897] pasemi_mac 0000:00:15.0: no mac address in device tree, not configuring
[ 2.678604] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.679181] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.680449] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.681910] 8139too 0000:06:06.0 eth1: RealTek RTL8139 at 0x000000007555485d, 00:00:21:2b:86:a8, IRQ 5
[ 2.682731] PPP generic driver version 2.4.2
[ 2.683128] PPP BSD Compression module registered
[ 2.683397] PPP Deflate Compression module registered
[ 2.683707] NET: Registered PF_PPPOX protocol family
[ 2.684727] electra-cf f0000000.cf: at mem 0xf0000000 io 0xf1000000 irq 18
[ 2.685611] ehci-pci 0000:05:13.5: EHCI Host Controller
[ 2.686286] ehci-pci 0000:05:13.5: new USB bus registered, assigned bus number 1
[ 2.686771] ehci-pci 0000:05:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 2.687238] ehci-pci 0000:05:13.5: debug port 1
[ 2.687520] ehci-pci 0000:05:13.5: irq 12, io mem 0xa0209800
[ 2.694634] ehci-pci 0000:05:13.5: USB 2.0 started, EHCI 1.00
[ 2.710045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 2.726179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.743349] usb usb1: Product: EHCI Host Controller
[ 2.760648] usb usb1: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ehci_hcd
[ 2.778095] usb usb1: SerialNumber: 0000:05:13.5
[ 2.795661] hub 1-0:1.0: USB hub found
[ 2.813002] hub 1-0:1.0: 10 ports detected
[ 2.830843] ohci-pci 0000:05:13.0: OHCI PCI host controller
[ 2.848491] ohci-pci 0000:05:13.0: new USB bus registered, assigned bus number 2
[ 2.866673] ohci-pci 0000:05:13.0: irq 9, io mem 0xa0207000
[ 2.939714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 2.957769] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.968738] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.975421] usb usb2: Product: OHCI PCI host controller
[ 2.993387] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.010474] usb usb2: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
[ 3.028705] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.045878] usb usb2: SerialNumber: 0000:05:13.0
[ 3.064346] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E5, max UDMA/133
[ 3.084056] hub 2-0:1.0: USB hub found
[ 3.100071] ata2.00: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.00, max UDMA/133
[ 3.136397] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.141654] hub 2-0:1.0: 2 ports detected
[ 3.164658] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.174815] ohci-pci 0000:05:13.1: OHCI PCI host controller
[ 3.213110] ata4.00: ATA-9: WDC WDS480G2G0A-00JH30, UG510000, max UDMA/133
[ 3.213119] ata4.00: 937721856 sectors, multi 1: LBA48 NCQ (depth 32)
[ 3.231457] ohci-pci 0000:05:13.1: new USB bus registered, assigned bus number 3
[ 3.250647] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.270692] ohci-pci 0000:05:13.1: irq 10, io mem 0xa0208000
[ 3.288574] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.327401] ata1.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL05, max UDMA/133
[ 3.327413] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.367163] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.372723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 3.385812] ata2.00: configured for UDMA/133
[ 3.406270] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.406277] usb usb3: Product: OHCI PCI host controller
[ 3.406282] usb usb3: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
[ 3.406286] usb usb3: SerialNumber: 0000:05:13.1
[ 3.432856] hub 3-0:1.0: USB hub found
[ 3.447282] ata4.00: Features: Dev-Sleep
[ 3.473651] hub 3-0:1.0: 2 ports detected
[ 3.488138] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.545922] ohci-pci 0000:05:13.2: OHCI PCI host controller
[ 3.558758] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.586769] ohci-pci 0000:05:13.2: new USB bus registered, assigned bus number 4
[ 3.590022] ata3.00: configured for UDMA/133
[ 3.634677] ohci-pci 0000:05:13.2: irq 11, io mem 0xa0206000
[ 3.649433] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 3.673768] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.728963] ata1.00: configured for UDMA/133
[ 3.752833] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 3.773607] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.773641] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.792761] usb usb4: Product: OHCI PCI host controller
[ 3.812980] ata4.00: configured for UDMA/133
[ 3.821472] scsi 0:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL05 PQ: 0 ANSI: 5
[ 3.832663] usb usb4: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
[ 3.894809] usb usb4: SerialNumber: 0000:05:13.2
[ 3.916308] hub 4-0:1.0: USB hub found
[ 3.938692] hub 4-0:1.0: 2 ports detected
[ 3.961095] ohci-pci 0000:05:13.3: OHCI PCI host controller
[ 3.983471] ohci-pci 0000:05:13.3: new USB bus registered, assigned bus number 5
[ 4.005594] ohci-pci 0000:05:13.3: irq 10, io mem 0xa0204000
[ 4.027424] sr 0:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.027431] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.074683] usb 2-1: New USB device found, idVendor=05ac, idProduct=1002, bcdDevice= 1.22
[ 4.096344] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.118027] usb 2-1: Product: Hub in Apple Extended USB Keyboard
[ 4.127768] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 4.138422] usb 2-1: Manufacturer: Mitsumi Electric
[ 4.159891] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.203134] usb usb5: Product: OHCI PCI host controller
[ 4.205801] hub 2-1:1.0: USB hub found
[ 4.224553] usb usb5: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
[ 4.244683] hub 2-1:1.0: 3 ports detected
[ 4.265675] usb usb5: SerialNumber: 0000:05:13.3
[ 4.308789] hub 5-0:1.0: USB hub found
[ 4.330137] hub 5-0:1.0: 2 ports detected
[ 4.351595] ohci-pci 0000:05:13.4: OHCI PCI host controller
[ 4.373051] ohci-pci 0000:05:13.4: new USB bus registered, assigned bus number 6
[ 4.373279] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.392858] ohci-pci 0000:05:13.4: irq 11, io mem 0xa0205000
[ 4.413917] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.445156] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH10LS20 1.00 PQ: 0 ANSI: 5
[ 4.470492] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 4.491991] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.513313] usb usb6: Product: OHCI PCI host controller
[ 4.534490] usb usb6: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
[ 4.555713] usb usb6: SerialNumber: 0000:05:13.4
[ 4.577028] hub 6-0:1.0: USB hub found
[ 4.598258] hub 6-0:1.0: 2 ports detected
[ 4.620572] usbcore: registered new interface driver usblp
[ 4.642537] usbcore: registered new interface driver usb-storage
[ 4.664203] usbcore: registered new interface driver usbserial_generic
[ 4.685962] usbserial: USB Serial support registered for generic
[ 4.707380] sr 1:0:0:0: [sr1] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.711638] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 4.727739] usbcore: registered new interface driver ftdi_sio
[ 4.767941] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4.788985] usbcore: registered new interface driver option
[ 4.810596] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.833011] mousedev: PS/2 mouse device common for all mice
[ 4.855091] usbcore: registered new interface driver synaptics_usb
[ 4.861635] usb 2-1.1: new full-speed USB device number 3 using ohci-pci
[ 4.876930] usbcore: registered new interface driver iforce
[ 4.918738] usbcore: registered new interface driver xpad
[ 4.940895] usbcore: registered new interface driver usb_acecad
[ 4.962708] usbcore: registered new interface driver aiptek
[ 4.963754] usb 5-1: New USB device found, idVendor=06a2, idProduct=0033, bcdDevice= 1.00
[ 4.982647] usbcore: registered new interface driver hanwang
[ 5.001405] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.021449] usbcore: registered new interface driver kbtab
[ 5.040213] usb 5-1: Product: USB Mouse
[ 5.080508] usb 5-1: Manufacturer: Topro
[ 5.084760] rtc_cmos rtc_cmos: registered as rtc0
[ 5.120249] rtc_cmos rtc_cmos: setting system clock to 2024-07-05T18:03:39 UTC (1720202619)
[ 5.121167] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 5.140188] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 5.140399] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.160055] i2c_dev: i2c /dev entries driver
[ 5.199005] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=0204, bcdDevice= 1.22
[ 5.199247] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 00E5 PQ: 0 ANSI: 5
[ 5.217551] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 5.238452] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.256570] usb 2-1.1: Product: Apple Extended USB Keyboard
[ 5.277221] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.296223] usb 2-1.1: Manufacturer: Mitsumi Electric
[ 5.318479] sd 2:0:0:0: [sda] Write Protect is off
[ 5.359113] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.359465] scsi 3:0:0:0: Direct-Access ATA WDC WDS480G2G0A- 0000 PQ: 0 ANSI: 5
[ 5.367638] usb 2-1.2: new full-speed USB device number 4 using ohci-pci
[ 5.381123] sd 3:0:0:0: [sdb] 937721856 512-byte logical blocks: (480 GB/447 GiB)
[ 5.399314] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.419493] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.438752] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 5.458461] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.477230] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 5.479386] IR JVC protocol handler initialized
[ 5.517488] IR MCE Keyboard/mouse protocol handler initialized
[ 5.517533] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.537217] IR NEC protocol handler initialized
[ 5.556218] sd 3:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 5.576215] IR RC5(x/sz) protocol handler initialized
[ 5.600642] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 4) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1) sda4 (SFS^@)(res 2 spb 1) sda5 (LNX^@)(res 2 spb 2) sda6 (SWP^@)(res 2 spb 1) sda7 (SFS^@)(res 2 spb 1) sda8 (SFS^@)(res 2 spb 1) sda9 (SFS^@)(res 2 spb 1) sda10 (SFS^@)(res 2 spb 1) sda11 (SFS^B)(res 2 spb 1) sda12 (DOS^C)(res 2 spb 4) sda13 (LNX^@)(res 2 spb 2) sda14 (DOS^C)(res 2 spb 1) sda15 (LNX^@)(res 2 spb 2) sda16 (SFS^@)(res 2 spb 1)
[ 5.615963] IR RC6 protocol handler initialized
[ 5.659441] sdb: RDSK (512) sdb1 (LNX^@)(res 2 spb 1) sdb2 (LNX^@)(res 2 spb 2) sdb3 (LNX^@)(res 2 spb 2) sdb4 ((res 2 spb 1) sdb5 ((res 2 spb 1) sdb6 ((res 2 spb 1) sdb7 ((res 2 spb 1) sdb8 ((res 2 spb 1)
[ 5.682708] IR SANYO protocol handler initialized
[ 5.707504] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.731138] IR Sharp protocol handler initialized
[ 5.756688] usb 2-1.2: not running at top speed; connect to a high speed hub
[ 5.778647] IR Sony protocol handler initialized
[ 5.812687] usb 2-1.2: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.27
[ 5.826864] IR XMP protocol handler initialized
[ 5.850151] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.875361] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.898734] usb 2-1.2: Product: Cruzer Glide
[ 5.949865] usb 2-1.2: Manufacturer: SanDisk
[ 5.955640] i2c i2c-8: Detected TI TMP423 chip at 0x4c
[ 5.974361] usb 2-1.2: SerialNumber: 2005244462031AB35CF8
[ 6.026801] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 6.052787] scsi host6: usb-storage 2-1.2:1.0
[ 6.081863] EDAC MC0: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
[ 6.109973] EDAC MC1: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:05.0 (POLLED)
[ 6.143641] input: Topro USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:05:13.3/usb5/5-1/5-1:1.0/0003:06A2:0033.0001/input/input0
[ 6.171860] hid-generic 0003:06A2:0033.0001: input: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:05:13.3-1/input0
[ 6.203636] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:05AC:0204.0002/input/input1
[ 6.286300] hid-generic 0003:05AC:0204.0002: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:05:13.0-1.1/input0
[ 6.320228] input: Mitsumi Electric Apple Extended USB Keyboard System Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:05AC:0204.0003/input/input2
[ 6.402877] input: Mitsumi Electric Apple Extended USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:05AC:0204.0003/input/input3
[ 6.434757] hid-generic 0003:05AC:0204.0003: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:05:13.0-1.1/input1
[ 6.467440] usbcore: registered new interface driver usbhid
[ 6.500054] usbhid: USB HID core driver
[ 6.532959] no UART detected at 0x1
[ 6.565595] usbcore: registered new interface driver snd-usb-audio
[ 6.597973] usbcore: registered new interface driver snd-ua101
[ 6.630061] usbcore: registered new interface driver snd-usb-usx2y
[ 6.661908] usbcore: registered new interface driver snd-usb-caiaq
[ 6.693715] usbcore: registered new interface driver snd-usb-6fire
[ 6.725200] usbcore: registered new interface driver snd-usb-hiface
[ 6.756439] usbcore: registered new interface driver snd-bcd2000
[ 6.787315] usbcore: registered new interface driver snd_usb_pod
[ 6.817783] usbcore: registered new interface driver snd_usb_podhd
[ 6.848043] usbcore: registered new interface driver snd_usb_toneport
[ 6.877878] usbcore: registered new interface driver snd_usb_variax
[ 6.908636] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 6.938262] Initializing XFRM netlink socket
[ 6.967087] NET: Registered PF_INET6 protocol family
[ 6.996426] Segment Routing with IPv6
[ 7.024848] In-situ OAM (IOAM) with IPv6
[ 7.053267] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 7.082259] NET: Registered PF_PACKET protocol family
[ 7.110652] NET: Registered PF_KEY protocol family
[ 7.138831] 9pnet: Installing 9P2000 support
[ 7.166804] Key type dns_resolver registered
[ 7.194638] drmem: No dynamic reconfiguration memory found
[ 7.222342] No cpufreq driver, powersavings modes disabled
[ 7.250001] Using PA6T idle loop (spin)
[ 7.281753] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[ 7.311279] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 7.315515] Loading compiled-in X.509 certificates
[ 7.370149] Btrfs loaded, zoned=no, fsverity=no
[ 7.396171] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.422245] sd 6:0:0:0: [sdc] 30529536 512-byte logical blocks: (15.6 GB/14.6 GiB)
[ 7.449312] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.476555] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.502166] ALSA device list:
[ 7.526816] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.527643] No soundcards found.
[ 7.549406] cfg80211: failed to load regulatory.db
[ 7.593728] sd 6:0:0:0: [sdc] Write Protect is off
[ 7.615835] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 7.624711] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7.726709] sdc: sdc1
[ 7.748969] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 7.781815] EXT4-fs (sdb3): mounted filesystem d737fd37-e386-48b0-98eb-b291696ff3d4 ro with ordered data mode. Quota mode: none.
[ 7.804672] VFS: Mounted root (ext4 filesystem) readonly on device 8:19.
[ 7.829729] devtmpfs: mounted
[ 7.858598] Freeing unused kernel image (initmem) memory: 9476K
[ 7.881234] Kernel memory protection not selected by kernel config.
[ 7.903992] Run /sbin/init as init process
[ 7.926704] with arguments:
[ 7.926707] /sbin/init
[ 7.926711] with environment:
[ 7.926714] HOME=/
[ 7.926717] TERM=linux
[ 8.158177] systemd[1]: systemd 253-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 8.209090] systemd[1]: Detected architecture ppc64.
[ 8.320698] systemd[1]: Hostname set to <fienix>.
[ 9.003403] systemd[1]: Queued start job for default target graphical.target.
[ 9.031812] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 9.080795] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 9.127298] systemd[1]: Created slice user.slice - User and Session Slice.
[ 9.172105] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 9.219062] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[ 9.244685] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 9.297381] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 9.351946] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 9.408213] systemd[1]: Reached target slices.target - Slice Units.
[ 9.465875] systemd[1]: Reached target swap.target - Swaps.
[ 9.524541] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 9.584689] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 9.645266] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 9.706995] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 9.770144] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 9.834921] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 9.901543] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 9.967734] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 10.041866] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 10.111017] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 10.180491] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 10.250204] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 10.321719] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 10.393865] systemd[1]: Starting modprobe at configfs.service - Load Kernel Module configfs...
[ 10.466240] systemd[1]: Starting modprobe at dm_mod.service - Load Kernel Module dm_mod...
[ 10.511137] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel at lists.linux.dev
[ 10.572492] systemd[1]: Starting modprobe at drm.service - Load Kernel Module drm...
[ 10.645262] systemd[1]: Starting modprobe at efi_pstore.service - Load Kernel Module efi_pstore...
[ 10.717743] systemd[1]: Starting modprobe at fuse.service - Load Kernel Module fuse...
[ 10.803988] systemd[1]: Starting modprobe at loop.service - Load Kernel Module loop...
[ 10.873737] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
[ 10.943171] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 10.978189] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 11.015050] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 11.079526] systemd-journald[1287]: Collecting audit messages is disabled.
[ 11.125642] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 11.220810] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 11.327371] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 11.393593] systemd[1]: Started systemd-journald.service - Journal Service.
[ 12.304347] sr 0:0:0:0: [sr0] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 12.334283] sr 0:0:0:0: [sr0] tag#23 Sense Key : 0x5 [current]
[ 12.363862] sr 0:0:0:0: [sr0] tag#23 ASC=0x21 ASCQ=0x0
[ 12.393030] sr 0:0:0:0: [sr0] tag#23 CDB: opcode=0x28 28 00 00 00 00 00 00 00 01 00
[ 12.422190] I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 15.042420] sr 1:0:0:0: [sr1] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s
[ 15.071893] sr 1:0:0:0: [sr1] tag#24 Sense Key : 0x5 [current]
[ 15.100996] sr 1:0:0:0: [sr1] tag#24 ASC=0x21 ASCQ=0x0
[ 15.129644] sr 1:0:0:0: [sr1] tag#24 CDB: opcode=0x28 28 00 00 00 00 00 00 00 01 00
[ 15.158276] I/O error, dev sr1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 15.208472] EXT4-fs (sdb3): re-mounted d737fd37-e386-48b0-98eb-b291696ff3d4 r/w. Quota mode: none.
[ 15.299579] systemd-journald[1287]: Received client request to flush runtime journal.
[ 15.378926] systemd-journald[1287]: /var/log/journal/1a61c33c1bfd4a0682463eca1581b969/system.journal: Montonic clock jumped backwards relative to last journal entry, rotating.
[ 15.378946] systemd-journald[1287]: Rotating system journal.
[ 16.240215] pasemi_mac 0000:00:14.3 enp0s20f3: renamed from eth0
[ 16.575612] 8139too 0000:06:06.0 enp6s6: renamed from eth1
[ 17.566350] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[ 17.570788] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[ 17.677766] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops 0xc0000000017f38e0)
[ 17.686683] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[ 17.687465] snd_hda_codec_idt hdaudioC1D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.687972] snd_hda_codec_idt hdaudioC1D3: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 17.688426] snd_hda_codec_idt hdaudioC1D3: mono: mono_out=0x0
[ 17.688797] snd_hda_codec_idt hdaudioC1D3: dig-out=0x21/0x0
[ 17.689148] snd_hda_codec_idt hdaudioC1D3: inputs:
[ 17.689438] snd_hda_codec_idt hdaudioC1D3: Rear Mic=0xe
[ 17.689786] snd_hda_codec_idt hdaudioC1D3: Front Mic=0xb
[ 17.690131] snd_hda_codec_idt hdaudioC1D3: Line=0xc
[ 17.690466] snd_hda_codec_idt hdaudioC1D3: CD=0x12
[ 17.727824] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input4
[ 17.841953] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input5
[ 17.845312] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input6
[ 17.852970] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input7
[ 17.862797] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input8
[ 17.863926] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input9
[ 17.871821] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input10
[ 17.874341] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input11
[ 17.875297] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input12
[ 21.709851] 8139too 0000:06:06.0 enp6s6: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 40.647417] systemd-journald[1287]: /var/log/journal/1a61c33c1bfd4a0682463eca1581b969/user-1000.journal: Montonic clock jumped backwards relative to last journal entry, rotating.
[ 40.647453] systemd-journald[1287]: Failed to write entry to /var/log/journal/1a61c33c1bfd4a0682463eca1581b969/user-1000.journal (27 items, 1043 bytes), rotating before retrying: Not a XENIX named type file
[ 70.645031] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
-------------- next part --------------
hash-mmu: Page sizes from device-tree:
hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=3
hash-mmu: base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000, tlbiel=0, penc=31
hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
Using 1TB segments
hash-mmu: Initializing hash mmu with SLB
Linux version 6.10.0-rc6-powerpc64-smp (christian at lx-cce) (powerpc-linux-gnu-gcc (Debian 9.5.0-1) 9.5.0, GNU ld (GN
U Binutils for Debian) 2.42) #1 SMP Fri Jul 5 06:17:33 CEST 2024
Found initrd at 0xc000000024000000:0xc000000025734a00
IOBMAP L2 allocated at: (____ptrval____)
ioremap() called early from .iommu_init_early_pasemi+0xec/0x260. Use early_ioremap() instead
Hardware name: pasemi,nemo PA6T 0x900102 A-EON Amigaone X1000
Found legacy serial port 0 for /pxp at 0,e0000000/serial at 1d
port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
Found legacy serial port 1 for /pxp at 0,e0000000/serial at 1d,1
port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
CPU maps initialized for 1 thread per core
(thread shift is 0)
Allocated 2320 bytes for 2 pacas
-----------------------------------------------------
phys_mem_size = 0x1000:000:11.1: bridge window [mem 0x80000400000-0x800005fffff 64bit pref]
pci 0000:00:11.2: PCI bridge to [bus 08]
pci 0000:00:11.2: bridge window [io 0x85000-0x85fff]
pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]
pci 0000:00:11.2: bridge window [mem 0x80000600000-0x800007fffff 64bit pref]
pci 0000:00:11.3: PCI bridge to [bus 09]
pci 0000:00:11.3: bridge window [io 0x86000o0ut Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Key type cifs.idmap registered
ntfs3: Read-only LZX/Xpress compression included
fuse: init (API version 7.40)
SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, fatal assert, debug enabled
9p: Installing v9fs 9p2000 file system support
xor: measuring software checksum speed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 6.10.0-rc6-powerpc64-smp ohci_hcd
usb usb2: SerialNumber: 0000:05:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:05:13.1: OHCI PCI host cont
oIR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR Sony protocol handler initialized
IR XMP protocol handler initialized
i2c i2c-8: Detected TI TMP423 chip at 0x4c
EDAC MC0: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
EDAC MC1: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: D
Vata4.00: qc timeout after 5000
msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1.00: qc timeout after 5000 msecs (cmd 0xa1)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: qc timeout after 5000 msecs (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: qc timeout after 5000 msecs (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err
mata2.00: qc timeout after 10000 msecs (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: qc timeout after 10000 msecs (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3: limiting SATA link speed to 1.5 Gbps
ata1.00: qc timeout after 10000 msecs (cmd 0xa1)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: qc timeout after 10000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: limiting SATA link speed to 1.5 Gbps
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: link is slow to respond, please be patient (ready=0)
ata2: link is slow to respond, please be patient (ready=0)
ata2: link is slow to respond, please be patient (ready=0)
ata1.00: qc timeout after 30000 msecs (cmd 0xa1)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: qc timeout after 30000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: qc timeout after 30000 msecs (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2: hardreset failed
ata2: reset failed, giving up
Freeing unused kernel image (initmem) memory: 9476K
Kernel memory protection not selected by kernel config.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
Loading, please wait...
+ '[' -z local ]
+ '[' -n ]
+ '[' none '=' none ]
+ noresume=y
+ mount -t tmpfs -o 'nodev,noexec,nosuid,size=10%,mode=0755' tmpfs /run
+ mkdir -m 0700 /run/initramfs
+ '[' -n /run/initramfs/initramfs.debug ]
+ exec
BusyBox v1.35.0 (Debian 1:1.35.0-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
-------------- next part --------------
/dts-v1/;
/ {
#interrupt-cells = <0x02>;
#address-cells = <0x02>;
#size-cells = <0x02>;
model = "pasemi,nemo";
device_type = "bootrom";
compatible = "pasemi,nemo\0pasemi,pa6t-1682m\0PA6T-1682M\0pasemi,pwrficient\0pasemi";
platform-open-pic = <0x00 0xfc000000 0x00 0x41000>;
phandle = <0x7fdff018>;
options {
little-endian? = <0x00>;
HWADDR = "00:50:c2:20:d9:e9";
CD = "boot -fs=iso atapi0.0:amigaboot.of";
HD = "boot -fs=amigafs ide0.1:amigaboot.of";
MENU_0_COMMAND = "boot -fs=amigafs ide0.1:amigaboot.of";
rd = "batch -fatfs usbdisk0:rd";
vm = "batch -fatfs usbdisk0:vm";
sc = "set console uart0";
keymap_swapaltamiga = "off";
MENU_1_LABEL = "Linux";
l = "boot -elf -noints -fatfs usbdisk0:vmlinux39NH";
ru = "batch -fatfs ";
du = "dir -fatfs usbdisk0:";
dc = "dir -fs=iso atapi0.0:";
env = "printenv";
dh = "dir -fs=amigafs ide0.1:";
STARTUP = "set pmu -astate=A4; menu";
MENU_2_LABEL = "Linux Alt";
CD1 = "boot -fs=iso atapi1.0:amigaboot.of";
LRD = "ramdisk -z -addr=0x24000000 -fatfs usbdisk0:initrd.img-4.1.12";
MENU_0_LABEL = "AmigaOS";
bootable_only = "1";
lab = "load -fs=amigafs ide0.1:amigaboot.of";
lof = "load -fs=amigafs ide0.1,dh14:ofclient";
MENU_1_COMMAND = "ramdisk -z -addr=0x24000000 -fs=amigafs ide0.1,dh14:initrd.img-4.19; boot -z -elf -noints -nousb -fs=amigafs ide0.1,dh14:vmlinuz-4.19";
MENU_2_COMMAND = "ramdisk -z -addr=0x24000000 -fatfs usbdisk0:initrd.img-4.19; boot -z -elf -noints -nousb -fatfs usbdisk0:vmlinuz-4.19";
bof = "boot -elf -noints -nousb -fs=amigafs ide0.1,dh14:ofclient";
bootargs = "console=tty0 root=UUID=e2bfffd4-f481-4c90-a565-1028de3fcb29";
dx = "dir -fs=amigafs ide0.1,dh12:";
amigaboot_quiet = "N";
os4_commandline = "debuglevel=5 munge";
bootmenu_waitticks = "30";
boot_config = "AmigaOS_4.1_Final_Edition_S";
vmlinux = "boot -z -elf -noints -nousb -fs=amigafs ide0.1,dh14:vmlinux";
MENU_TIMEOUT = "2";
framebuffer = "800/600/8/0x90000000/832";
BOOT_CONSOLE = "pcconsole0";
CFE_VERSION = "PAS-2.0.30";
CFE_BOARDNAME = "NEMO";
CFE_MEMORYSIZE = "4096";
phandle = <0x7fe2f1f0>;
};
openprom {
device_type = "BootROM";
model = "Open Firmware 3";
phandle = <0x7fe2f2f0>;
};
sdc at fc000000 {
device_type = "sdc";
#address-cells = <0x01>;
#size-cells = <0x01>;
compatible = "1682m-sdc\0pasemi,pwrficient-sdc\0pasemi,sdc";
reg = <0x00 0xfc000000 0x00 0x800000>;
phandle = <0x7fe2f458>;
openpic at fc000000 {
device_type = "open-pic";
compatible = "pasemi,pwrficient-openpic\0chrp,open-pic";
interrupt-controller;
#address-cells = <0x00>;
#interrupt-cells = <0x02>;
msi-available-ranges = <0x200 0x200>;
reg = <0xfc000000 0x100000>;
phandle = <0x7fe2f6e8>;
};
gpio at fc103000 {
device_type = "gpio";
compatible = "1682m-gpio\0pasemi,pwrficient-gpio\0pasemi,gpio";
reg = <0xfc103000 0x1000>;
phandle = <0x7fe2fa18>;
};
gizmo at fc104000 {
device_type = "gizmo";
compatible = "1682m-gizmo\0pasemi,pwrficient-gizmo\0pasemi,gizmo";
reg = <0xfc104000 0x1000>;
phandle = <0x7fe2fbf0>;
};
rng at fc105000 {
device_type = "rng";
compatible = "1682m-rng\0pasemi,pwrficient-rng\0pasemi,rng";
reg = <0xfc105000 0x1000>;
phandle = <0x7fe2fdd0>;
};
mdio at 0 {
compatible = "gpio-mdio";
#address-cells = <0x01>;
#size-cells = <0x00>;
mdc-pin = <0x05>;
mdio-pin = <0x06>;
reg = <0x00 0x00>;
phandle = <0x7fe3d6f8>;
ethernet-phy at 0 {
reg = <0x00>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x07 0x01>;
phandle = <0x7fe3d9b8>;
};
};
};
pxp at 0,e0000000 {
interrupt-controller;
device_type = "pci";
#interrupt-cells = <0x01>;
#address-cells = <0x03>;
#size-cells = <0x02>;
model = "pa";
compatible = "pasemi,rootbus\0pa-pxp";
interrupt-map-mask = <0x00 0x00 0x00 0xff>;
interrupt-map = <0x00 0x00 0x00 0x30 0x7fe2f6e8 0x30 0x01 0x00 0x00 0x00 0x31 0x7fe2f6e8 0x31 0x01 0x00 0x00 0x00 0x32 0x7fe2f6e8 0x32 0x01 0x00 0x00 0x00 0x33 0x7fe2f6e8 0x33 0x01>;
bus-range = <0x00 0xff>;
ranges = <0x00 0x00 0xe0000000 0x00 0xe0000000 0x00 0x10000000 0x1000000 0x00 0x00 0x00 0xfc800000 0x00 0x800000 0x2000000 0x00 0x80000000 0x00 0x80000000 0x00 0x60000000 0x2000000 0x00 0xe0000000 0x00 0xe0000000 0x00 0x100000 0x2000000 0x00 0xfd800000 0x00 0xfd800000 0x00 0x1000 0x2000000 0x800 0x00 0x800 0x00 0x400 0x00>;
reg = <0x00 0xe0000000 0x00 0x10000000>;
phandle = <0x7fe2ffa8>;
serial at 1d {
device_type = "serial";
vendor-id = <0x1959>;
device-id = <0xa004>;
revision-id = <0x02>;
class-code = <0x70003>;
reg = <0xe800 0x00 0x00 0x00 0x00 0x100e810 0x00 0x00 0x00 0x08>;
assigned-addresses = <0x8100e810 0x00 0x7f03f8 0x00 0x08>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x49 0x01>;
clock-frequency = <0x7f28155>;
current-speed = <0x1c200>;
compatible = "ns16550\0pciclass,0700";
phandle = <0x7fe318a8>;
};
serial at 1d,1 {
device_type = "serial";
vendor-id = <0x1959>;
device-id = <0xa004>;
revision-id = <0x02>;
class-code = <0x70003>;
reg = <0xe900 0x00 0x00 0x00 0x00 0x100e910 0x00 0x00 0x00 0x08>;
assigned-addresses = <0x8100e910 0x00 0x7f02f8 0x00 0x08>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x4a 0x01>;
clock-frequency = <0x7f28155>;
current-speed = <0x1c200>;
compatible = "ns16550\0pciclass,0700";
phandle = <0x7fe31db0>;
};
dma-engine at 1a {
device_type = "dma-engine";
vendor-id = <0x1959>;
device-id = <0xa007>;
revision-id = <0x12>;
class-code = <0x801ff>;
reg = <0xd000 0x00 0x00 0x00 0x00 0x82000000 0x00 0xe00d0000 0x00 0x1000>;
assigned-addresses = <0x82000000 0x00 0xe00d0000 0x00 0x1000>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x80 0x01>;
compatible = "1682m-dma\0pasemi,dma-engine";
phandle = <0x7fe322b8>;
};
io-bridge at 0 {
device_type = "isa";
vendor-id = <0x1959>;
device-id = <0xa001>;
revision-id = <0x12>;
class-code = <0x60000>;
reg = <0x00 0x00 0x00 0x00 0x00 0x82000000 0x00 0xe0000000 0x00 0x2000 0xc2000000 0x00 0xfd800000 0x00 0x1000>;
assigned-addresses = <0x82000000 0x00 0xe0000000 0x00 0x2000 0xc2000000 0x00 0xfd800000 0x00 0x1000>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x56 0x01>;
compatible = "pasemi,1682m-iob\0pasemi,io-bridge";
phandle = <0x7fe32728>;
};
cache-controller at 1 {
device_type = "cache-controller";
vendor-id = <0x1959>;
device-id = <0xa009>;
revision-id = <0x11>;
class-code = <0x58000>;
reg = <0x800 0x00 0x00 0x00 0x00>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x52 0x01>;
compatible = "pasemi,1682m-l2c\0pasemi,l2c";
phandle = <0x7fe32bc8>;
};
ethernet at 14,3 {
device_type = "ethernet";
vendor-id = <0x1959>;
device-id = <0xa005>;
revision-id = <0x11>;
class-code = <0x20000>;
reg = <0xa300 0x00 0x00 0x00 0x00 0x82000000 0x00 0xe00a3000 0x00 0x1000>;
assigned-addresses = <0x82000000 0x00 0xe00a3000 0x00 0x1000>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x43 0x01>;
local-mac-address = [02 00 e0 0a 30 00];
compatible = "pasemi,1682m-gmac\0pasemi,ethernet";
phy-handle = <0x7fe3d9b8>;
phandle = <0x7fe32fd0>;
};
i2c at 1c {
device_type = "i2c";
vendor-id = <0x1959>;
device-id = <0xa003>;
revision-id = <0x01>;
class-code = <0xc0500>;
reg = <0xe000 0x00 0x00 0x00 0x00 0x100e010 0x00 0x00 0x00 0x40>;
assigned-addresses = <0x8100e010 0x00 0x7f0200 0x00 0x40>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x46 0x01>;
phandle = <0x7fe334a0>;
};
i2c at 1c,1 {
device_type = "i2c";
vendor-id = <0x1959>;
device-id = <0xa003>;
revision-id = <0x01>;
class-code = <0xc0500>;
reg = <0xe100 0x00 0x00 0x00 0x00 0x100e110 0x00 0x00 0x00 0x40>;
assigned-addresses = <0x8100e110 0x00 0x7f0240 0x00 0x40>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x47 0x01>;
phandle = <0x7fe33890>;
};
i2c at 1c,2 {
device_type = "i2c";
vendor-id = <0x1959>;
device-id = <0xa003>;
revision-id = <0x01>;
class-code = <0xc0500>;
reg = <0xe200 0x00 0x00 0x00 0x00 0x100e210 0x00 0x00 0x00 0x40>;
assigned-addresses = <0x8100e210 0x00 0x7f0280 0x00 0x40>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x48 0x01>;
phandle = <0x7fe33c80>;
};
pci at 11,3 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa002>;
revision-id = <0x11>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x09 0x09>;
reg = <0x8b00 0x00 0x00 0x00 0x00>;
phandle = <0x7fe36500>;
};
pci at 11,2 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa002>;
revision-id = <0x11>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x08 0x08>;
reg = <0x8a00 0x00 0x00 0x00 0x00>;
phandle = <0x7fe36928>;
};
pci at 11,1 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa002>;
revision-id = <0x11>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x07 0x07>;
reg = <0x8900 0x00 0x00 0x00 0x00>;
phandle = <0x7fe36d50>;
};
pci at 11 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa002>;
revision-id = <0x11>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x05 0x06>;
reg = <0x8800 0x00 0x00 0x00 0x00>;
ranges = <0x1000000 0x00 0x00 0x1000000 0x00 0x00 0x00 0x4000 0x2000000 0x00 0xa0100000 0x2000000 0x00 0xa0100000 0x00 0x300000>;
phandle = <0x7fe37178>;
pci at 12 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x09 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4380>;
revision-id = <0x00>;
class-code = <0x1018f>;
reg = <0x59000 0x00 0x00 0x00 0x00 0x1059010 0x00 0x00 0x00 0x08 0x1059014 0x00 0x00 0x00 0x04 0x1059018 0x00 0x00 0x00 0x08 0x105901c 0x00 0x00 0x00 0x04 0x1059020 0x00 0x00 0x00 0x10 0x2059024 0x00 0x00 0x00 0x400>;
assigned-addresses = <0x81059010 0x00 0x1040 0x00 0x08 0x81059014 0x00 0x105c 0x00 0x04 0x81059018 0x00 0x1048 0x00 0x08 0x8105901c 0x00 0x1058 0x00 0x04 0x81059020 0x00 0x1010 0x00 0x10 0x82059024 0x00 0xa0209000 0x00 0x400>;
phandle = <0x7fe39f40>;
atapi0.0 {
device_type = "block";
phandle = <0x7fe3a3f8>;
};
ide0.1 {
device_type = "block";
phandle = <0x7fe3a500>;
};
};
pci at 13 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x09 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4387>;
revision-id = <0x00>;
class-code = <0xc0310>;
reg = <0x59800 0x00 0x00 0x00 0x00 0x2059810 0x00 0x00 0x00 0x1000>;
assigned-addresses = <0x82059810 0x00 0xa0207000 0x00 0x1000>;
phandle = <0x7fe3a600>;
};
pci at 13,1 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x0a 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4388>;
revision-id = <0x00>;
class-code = <0xc0310>;
reg = <0x59900 0x00 0x00 0x00 0x00 0x2059910 0x00 0x00 0x00 0x1000>;
assigned-addresses = <0x82059910 0x00 0xa0208000 0x00 0x1000>;
phandle = <0x7fe3a9f0>;
};
pci at 13,2 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x0b 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4389>;
revision-id = <0x00>;
class-code = <0xc0310>;
reg = <0x59a00 0x00 0x00 0x00 0x00 0x2059a10 0x00 0x00 0x00 0x1000>;
assigned-addresses = <0x82059a10 0x00 0xa0206000 0x00 0x1000>;
phandle = <0x7fe3ade0>;
};
pci at 13,3 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x0a 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x438a>;
revision-id = <0x00>;
class-code = <0xc0310>;
reg = <0x59b00 0x00 0x00 0x00 0x00 0x2059b10 0x00 0x00 0x00 0x1000>;
assigned-addresses = <0x82059b10 0x00 0xa0204000 0x00 0x1000>;
phandle = <0x7fe3b1d0>;
};
pci at 13,4 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x0b 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x438b>;
revision-id = <0x00>;
class-code = <0xc0310>;
reg = <0x59c00 0x00 0x00 0x00 0x00 0x2059c10 0x00 0x00 0x00 0x1000>;
assigned-addresses = <0x82059c10 0x00 0xa0205000 0x00 0x1000>;
phandle = <0x7fe3b5c0>;
};
pci at 13,5 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x0c 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4386>;
revision-id = <0x00>;
class-code = <0xc0320>;
reg = <0x59d00 0x00 0x00 0x00 0x00 0x2059d10 0x00 0x00 0x00 0x100>;
assigned-addresses = <0x82059d10 0x00 0xa0209800 0x00 0x100>;
phandle = <0x7fe3b9b0>;
};
pci at 14 {
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4385>;
revision-id = <0x14>;
class-code = <0xc0500>;
reg = <0x5a000 0x00 0x00 0x00 0x00 0x105a010 0x00 0x00 0x00 0x10 0x205a014 0x00 0x00 0x00 0x400>;
assigned-addresses = <0x8105a010 0x00 0x1020 0x00 0x10 0x8205a014 0x00 0xa0209400 0x00 0x400>;
phandle = <0x7fe3bda0>;
};
pci at 14,1 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x09 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x438c>;
revision-id = <0x00>;
class-code = <0x10183>;
reg = <0x5a100 0x00 0x00 0x00 0x00 0x105a110 0x00 0x00 0x00 0x08 0x105a114 0x00 0x00 0x00 0x04 0x105a118 0x00 0x00 0x00 0x08 0x105a11c 0x00 0x00 0x00 0x04 0x105a120 0x00 0x00 0x00 0x10>;
assigned-addresses = <0x8105a110 0x00 0x1030 0x00 0x08 0x8105a114 0x00 0x1054 0x00 0x04 0x8105a118 0x00 0x1038 0x00 0x08 0x8105a11c 0x00 0x1050 0x00 0x04 0x8105a120 0x00 0x1000 0x00 0x10>;
phandle = <0x7fe3c108>;
};
pci at 14,2 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x09 0x01>;
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4383>;
revision-id = <0x00>;
class-code = <0x40300>;
subsystem-vendor-id = <0x1888>;
subsystem-id = <0x1000>;
reg = <0x5a200 0x00 0x00 0x00 0x00 0x205a210 0x00 0x00 0x00 0x4000>;
assigned-addresses = <0x8205a210 0x00 0xa0200000 0x00 0x4000>;
phandle = <0x7fe3c598>;
};
pci at 14,3 {
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x438d>;
revision-id = <0x00>;
class-code = <0x60100>;
reg = <0x5a300 0x00 0x00 0x00 0x00 0x205a310 0x00 0x00 0x00 0x100000>;
assigned-addresses = <0x8205a310 0x00 0xa0100000 0x00 0x100000>;
phandle = <0x7fe3ca38>;
};
pci at 14,4 {
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x4384>;
revision-id = <0x00>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x06 0x06>;
reg = <0x5a400 0x00 0x00 0x00 0x00>;
ranges = <0x1000000 0x00 0x3000 0x1000000 0x00 0x3000 0x00 0x1000 0x2000000 0x00 0xa0300000 0x2000000 0x00 0xa0300000 0x00 0x100000>;
phandle = <0x7fe3cd78>;
pci at 6 {
interrupt-parent = <0x7fe2ffa8>;
interrupts = <0x05 0x01>;
device_type = "pci";
vendor-id = <0x10ec>;
device-id = <0x8139>;
revision-id = <0x10>;
class-code = <0x20000>;
subsystem-vendor-id = <0x10bd>;
subsystem-id = <0x320>;
reg = <0x63000 0x00 0x00 0x00 0x00 0x1063010 0x00 0x00 0x00 0x100 0x2063014 0x00 0x00 0x00 0x100>;
assigned-addresses = <0x81063010 0x00 0x3000 0x00 0x100 0x82063014 0x00 0xa0300000 0x00 0x100>;
phandle = <0x7fe3d230>;
};
};
};
pci at 10 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa002>;
revision-id = <0x11>;
class-code = <0x60400>;
#address-cells = <0x03>;
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
bus-range = <0x01 0x01>;
reg = <0x8000 0x00 0x00 0x00 0x00>;
ranges = <0x1000000 0x00 0x2000 0x1000000 0x00 0x2000 0x00 0x1000 0x2000000 0x00 0x90000000 0x2000000 0x00 0x90000000 0x00 0x10100000>;
phandle = <0x7fe37630>;
pci at 0 {
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0x6610>;
revision-id = <0x87>;
class-code = <0x30000>;
subsystem-vendor-id = <0x174b>;
subsystem-id = <0xe269>;
reg = <0x10000 0x00 0x00 0x00 0x00 0x42010010 0x00 0x00 0x00 0x10000000 0x2010018 0x00 0x00 0x00 0x40000 0x1010020 0x00 0x00 0x00 0x100>;
assigned-addresses = <0xc2010010 0x00 0x90000000 0x00 0x10000000 0x82010018 0x00 0xa0000000 0x00 0x40000 0x81010020 0x00 0x2000 0x00 0x100>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x30 0x01>;
phandle = <0x7fe395b0>;
};
pci at 0,1 {
device_type = "pci";
vendor-id = <0x1002>;
device-id = <0xaab0>;
revision-id = <0x00>;
class-code = <0x40300>;
subsystem-vendor-id = <0x174b>;
subsystem-id = <0xaab0>;
reg = <0x10100 0x00 0x00 0x00 0x00 0x2010110 0x00 0x00 0x00 0x4000>;
assigned-addresses = <0x82010110 0x00 0xa0060000 0x00 0x4000>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x31 0x01>;
phandle = <0x7fe39aa0>;
};
};
pci at 3 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa00c>;
revision-id = <0x13>;
class-code = <0x80080>;
reg = <0x1800 0x00 0x00 0x00 0x00>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x54 0x01>;
phandle = <0x7fe37ae8>;
};
pci at 4 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa00a>;
revision-id = <0x11>;
class-code = <0x50000>;
reg = <0x2000 0x00 0x00 0x00 0x00>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x58 0x01>;
phandle = <0x7fe37e60>;
};
pci at 5 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa00a>;
revision-id = <0x11>;
class-code = <0x50000>;
reg = <0x2800 0x00 0x00 0x00 0x00>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x5a 0x01>;
phandle = <0x7fe381d8>;
};
pci at 8 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa000>;
revision-id = <0x12>;
class-code = "\0\v ";
reg = <0x4000 0x00 0x00 0x00 0x00>;
phandle = <0x7fe38550>;
};
pci at 9 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa000>;
revision-id = <0x12>;
class-code = "\0\v ";
reg = <0x4800 0x00 0x00 0x00 0x00>;
phandle = <0x7fe38818>;
};
pci at 15 {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa006>;
revision-id = <0x11>;
class-code = <0x20000>;
reg = <0xa800 0x00 0x00 0x00 0x00 0x82000000 0x00 0xe00a8000 0x00 0x1000>;
assigned-addresses = <0x82000000 0x00 0xe00a8000 0x00 0x1000>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x44 0x01>;
phandle = <0x7fe38ae0>;
};
pci at 1b {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa00b>;
revision-id = <0x11>;
class-code = <0x88000>;
reg = <0xd800 0x00 0x00 0x00 0x00>;
phandle = <0x7fe38ed0>;
};
pci at 1e {
device_type = "pci";
vendor-id = <0x1959>;
device-id = <0xa008>;
revision-id = <0x12>;
class-code = <0x601ff>;
reg = <0xf000 0x00 0x00 0x00 0x00 0x100f010 0x00 0x00 0x00 0x100 0x100f014 0x00 0x00 0x00 0x100>;
assigned-addresses = <0x8100f010 0x00 0x7f0400 0x00 0x100 0x8100f014 0x00 0x7f0500 0x00 0x100>;
interrupt-parent = <0x7fe2f6e8>;
interrupts = <0x51 0x01>;
phandle = <0x7fe39198>;
};
};
cpus {
#address-cells = <0x01>;
#size-cells = <0x00>;
phandle = <0x7fe30540>;
PowerPC,PA6T at 0 {
device_type = "cpu";
bus-frequency = <0x35a4e900>;
clock-frequency = <0x6b49d200>;
timebase-frequency = <0x3f940aa>;
d-cache-line-size = <0x40>;
i-cache-line-size = <0x40>;
d-cache-block-size = <0x40>;
i-cache-block-size = <0x40>;
ibm,segment-page-sizes = <0x0c 0x00 0x01 0x0c 0x00 0x0e 0x20 0x01 0x0e 0x01 0x10 0x110 0x01 0x10 0x03 0x12 0x130 0x01 0x12 0x0f 0x14 0x30 0x01 0x14 0x1f 0x18 0x100 0x01 0x18 0x00 0x1e 0x120 0x01 0x1e 0x3f>;
ibm,processor-segment-sizes = <0x1c 0x28>;
ibm,processor-page-sizes = <0x0c 0x0e 0x10 0x12 0x14 0x18 0x1e>;
64-bit;
cpu-version = <0x900102>;
general-purpose;
graphics;
d-cache-size = <0x10000>;
i-cache-size = <0x10000>;
i-cache-sets = <0x02>;
d-cache-sets = <0x02>;
reg = <0x00>;
phandle = <0x7fe30698>;
};
PowerPC,PA6T at 1 {
device_type = "cpu";
bus-frequency = <0x35a4e900>;
clock-frequency = <0x6b49d200>;
timebase-frequency = <0x3f940aa>;
d-cache-line-size = <0x40>;
i-cache-line-size = <0x40>;
d-cache-block-size = <0x40>;
i-cache-block-size = <0x40>;
ibm,segment-page-sizes = <0x0c 0x00 0x01 0x0c 0x00 0x0e 0x20 0x01 0x0e 0x01 0x10 0x110 0x01 0x10 0x03 0x12 0x130 0x01 0x12 0x0f 0x14 0x30 0x01 0x14 0x1f 0x18 0x100 0x01 0x18 0x00 0x1e 0x120 0x01 0x1e 0x3f>;
ibm,processor-segment-sizes = <0x1c 0x28>;
ibm,processor-page-sizes = <0x0c 0x0e 0x10 0x12 0x14 0x18 0x1e>;
64-bit;
cpu-version = <0x900102>;
general-purpose;
graphics;
d-cache-size = <0x10000>;
i-cache-size = <0x10000>;
i-cache-sets = <0x02>;
d-cache-sets = <0x02>;
reg = <0x01>;
phandle = <0x7fe30eb0>;
};
};
memory {
device_type = "memory";
reg = <0x00 0x00 0x00 0x80000000 0x01 0x00 0x00 0x80000000>;
available = <0x00 0x00 0x00 0x7fd1d000 0x01 0x00 0x00 0x80000000>;
phandle = <0x7fe316c8>;
};
lpc at fe000000 {
device_type = "lpc";
#address-cells = <0x01>;
#size-cells = <0x01>;
reg = <0x00 0xfe000000 0x00 0x2000000>;
ranges = <0xfe000000 0x00 0xfe000000 0x2000000>;
phandle = <0x7fe34070>;
};
localbus at f0000000 {
device_type = "localbus";
compatible = "pasemi,localbus\0localbus";
#interrupt-cells = <0x02>;
#address-cells = <0x01>;
#size-cells = <0x01>;
reg = <0x00 0xf0000000 0x00 0xc000000>;
ranges = <0x00 0x00 0xf0000000 0xc000000>;
phandle = <0x7fe342e0>;
cf at 1000000 {
device_type = "electra-cf";
compatible = "pasemi,chitra-cf\0pasemi,electra-cf\0electra-cf";
reg = <0x00 0x1000 0x1000000 0x1000>;
interrupts = <0x00 0x01>;
card-detect-gpio = <0x0e>;
card-vsense-gpio = <0x01>;
card-3v-gpio = <0x0a>;
card-5v-gpio = <0x0b>;
interrupt-parent = <0x7fe2f6e8>;
phandle = <0x7fe3dbc8>;
};
};
chosen {
linux,stdout-path = "/bootconsole";
bootargs = "console=tty0 root=/dev/sdb3\n";
cpu = <0x7fe30698>;
memory = <0x7fe316c8>;
sdc-interrupt-controller = <0x7fe2f6e8>;
stdin = <0x7fe35ae8>;
stdout = <0x7fe35ae8>;
phandle = <0x7fe34628>;
};
bootconsole {
device_type = "bootconsole";
phandle = <0x7fe359d8>;
};
};
More information about the Linuxppc-dev
mailing list