[PATCH 2/4] powerpc: dts: p1010rdb: fix INTx interrupt issue on P1010RDB-PB

[Frank Li]

From: Xiaowei Bao <xiaowei.bao at nxp.com>

Due to the INTA is shared with the active-low PHY2 interrupt on
P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as
active-low, the P1010RDB-PB board is used separately, so configure
P1010RDB-PB's INTA with polarity as active-high.  The INTX in
P1010RDB-PB do not work because of the pcie at 0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie at 0 node fixup
to p1010rdb-pb.dts and p1010rdb-pb_36b.dts.

Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts     | 16 ++++++++++++++++
 arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts | 16 ++++++++++++++++
 arch/powerpc/boot/dts/fsl/p1010rdb.dtsi       | 16 ----------------
 3 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 3a94acbb3c033..ce3346d77858f 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -29,3 +29,19 @@ &phy2 {
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie at 0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 4cf255fedc96e..83590354f9a09 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -56,3 +56,19 @@ &phy2 {
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie at 0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 2ca9cee2ddeb2..ef49a7d6c69dd 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -215,19 +215,3 @@ enet2: ethernet at b2000 {
 		phy-connection-type = "sgmii";
 	};
 };
-
-&pci0 {
-	pcie at 0 {
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			/*
-			 *irq[4:5] are active-high
-			 *irq[6:7] are active-low
-			 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-- 
2.34.1