[PATCH] crypto:vmx: Move ppc vmx diirectory to arch/powerpc/crypto.
Danny Tsen
dtsen at linux.ibm.com
Wed Jan 3 07:58:56 AEDT 2024
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen at linux.ibm.com>
---
arch/powerpc/crypto/Kconfig | 20 ++
arch/powerpc/crypto/Makefile | 20 +-
.../crypto/vmx => arch/powerpc/crypto}/aes.c | 0
.../vmx => arch/powerpc/crypto}/aes_cbc.c | 0
.../vmx => arch/powerpc/crypto}/aes_ctr.c | 0
.../vmx => arch/powerpc/crypto}/aes_xts.c | 0
.../vmx => arch/powerpc/crypto}/aesp8-ppc.h | 0
.../vmx => arch/powerpc/crypto}/aesp8-ppc.pl | 0
.../vmx => arch/powerpc/crypto}/ghash.c | 0
.../powerpc/crypto}/ghashp8-ppc.pl | 0
.../crypto/vmx => arch/powerpc/crypto}/vmx.c | 0
drivers/crypto/Kconfig | 14 +-
drivers/crypto/Makefile | 2 +-
drivers/crypto/vmx/.gitignore | 3 -
drivers/crypto/vmx/Kconfig | 14 --
drivers/crypto/vmx/Makefile | 23 --
drivers/crypto/vmx/ppc-xlate.pl | 231 ------------------
17 files changed, 46 insertions(+), 281 deletions(-)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aes.c (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aes_cbc.c (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aes_ctr.c (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aes_xts.c (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aesp8-ppc.h (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/aesp8-ppc.pl (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/ghash.c (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/ghashp8-ppc.pl (100%)
rename {drivers/crypto/vmx => arch/powerpc/crypto}/vmx.c (100%)
delete mode 100644 drivers/crypto/vmx/.gitignore
delete mode 100644 drivers/crypto/vmx/Kconfig
delete mode 100644 drivers/crypto/vmx/Makefile
delete mode 100644 drivers/crypto/vmx/ppc-xlate.pl
diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
index 6fc2248ca561..1e201b7ae2fc 100644
--- a/arch/powerpc/crypto/Kconfig
+++ b/arch/powerpc/crypto/Kconfig
@@ -137,4 +137,24 @@ config CRYPTO_POLY1305_P10
- Power10 or later
- Little-endian
+config CRYPTO_DEV_VMX
+ bool "Support for VMX cryptographic acceleration instructions"
+ depends on PPC64 && VSX
+ help
+ Support for VMX cryptographic acceleration instructions.
+
+config CRYPTO_DEV_VMX_ENCRYPT
+ tristate "Encryption acceleration support on P8 CPU"
+ depends on CRYPTO_DEV_VMX
+ select CRYPTO_AES
+ select CRYPTO_CBC
+ select CRYPTO_CTR
+ select CRYPTO_GHASH
+ select CRYPTO_XTS
+ default m
+ help
+ Support for VMX cryptographic acceleration instructions on Power8 CPU.
+ This module supports acceleration for AES and GHASH in hardware. If you
+ choose 'M' here, this module will be called vmx-crypto.
+
endmenu
diff --git a/arch/powerpc/crypto/Makefile b/arch/powerpc/crypto/Makefile
index ebdac1b9eb9a..fca0e9739869 100644
--- a/arch/powerpc/crypto/Makefile
+++ b/arch/powerpc/crypto/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CRYPTO_VPMSUM_TESTER) += crc-vpmsum_test.o
obj-$(CONFIG_CRYPTO_AES_GCM_P10) += aes-gcm-p10-crypto.o
obj-$(CONFIG_CRYPTO_CHACHA20_P10) += chacha-p10-crypto.o
obj-$(CONFIG_CRYPTO_POLY1305_P10) += poly1305-p10-crypto.o
+obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
aes-ppc-spe-y := aes-spe-core.o aes-spe-keys.o aes-tab-4k.o aes-spe-modes.o aes-spe-glue.o
md5-ppc-y := md5-asm.o md5-glue.o
@@ -27,14 +28,29 @@ crct10dif-vpmsum-y := crct10dif-vpmsum_asm.o crct10dif-vpmsum_glue.o
aes-gcm-p10-crypto-y := aes-gcm-p10-glue.o aes-gcm-p10.o ghashp10-ppc.o aesp10-ppc.o
chacha-p10-crypto-y := chacha-p10-glue.o chacha-p10le-8x.o
poly1305-p10-crypto-y := poly1305-p10-glue.o poly1305-p10le_64.o
+vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
+
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+override flavour := linux-ppc64le
+else
+ifdef CONFIG_PPC64_ELF_ABI_V2
+override flavour := linux-ppc64-elfv2
+else
+override flavour := linux-ppc64
+endif
+endif
quiet_cmd_perl = PERL $@
- cmd_perl = $(PERL) $< $(if $(CONFIG_CPU_LITTLE_ENDIAN), linux-ppc64le, linux-ppc64) > $@
+ cmd_perl = $(PERL) $< $(flavour) > $@
-targets += aesp10-ppc.S ghashp10-ppc.S
+targets += aesp10-ppc.S ghashp10-ppc.S aesp8-ppc.S ghashp8-ppc.S
$(obj)/aesp10-ppc.S $(obj)/ghashp10-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE
$(call if_changed,perl)
+$(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE
+ $(call if_changed,perl)
+
OBJECT_FILES_NON_STANDARD_aesp10-ppc.o := y
OBJECT_FILES_NON_STANDARD_ghashp10-ppc.o := y
+OBJECT_FILES_NON_STANDARD_aesp8-ppc.o := y
diff --git a/drivers/crypto/vmx/aes.c b/arch/powerpc/crypto/aes.c
similarity index 100%
rename from drivers/crypto/vmx/aes.c
rename to arch/powerpc/crypto/aes.c
diff --git a/drivers/crypto/vmx/aes_cbc.c b/arch/powerpc/crypto/aes_cbc.c
similarity index 100%
rename from drivers/crypto/vmx/aes_cbc.c
rename to arch/powerpc/crypto/aes_cbc.c
diff --git a/drivers/crypto/vmx/aes_ctr.c b/arch/powerpc/crypto/aes_ctr.c
similarity index 100%
rename from drivers/crypto/vmx/aes_ctr.c
rename to arch/powerpc/crypto/aes_ctr.c
diff --git a/drivers/crypto/vmx/aes_xts.c b/arch/powerpc/crypto/aes_xts.c
similarity index 100%
rename from drivers/crypto/vmx/aes_xts.c
rename to arch/powerpc/crypto/aes_xts.c
diff --git a/drivers/crypto/vmx/aesp8-ppc.h b/arch/powerpc/crypto/aesp8-ppc.h
similarity index 100%
rename from drivers/crypto/vmx/aesp8-ppc.h
rename to arch/powerpc/crypto/aesp8-ppc.h
diff --git a/drivers/crypto/vmx/aesp8-ppc.pl b/arch/powerpc/crypto/aesp8-ppc.pl
similarity index 100%
rename from drivers/crypto/vmx/aesp8-ppc.pl
rename to arch/powerpc/crypto/aesp8-ppc.pl
diff --git a/drivers/crypto/vmx/ghash.c b/arch/powerpc/crypto/ghash.c
similarity index 100%
rename from drivers/crypto/vmx/ghash.c
rename to arch/powerpc/crypto/ghash.c
diff --git a/drivers/crypto/vmx/ghashp8-ppc.pl b/arch/powerpc/crypto/ghashp8-ppc.pl
similarity index 100%
rename from drivers/crypto/vmx/ghashp8-ppc.pl
rename to arch/powerpc/crypto/ghashp8-ppc.pl
diff --git a/drivers/crypto/vmx/vmx.c b/arch/powerpc/crypto/vmx.c
similarity index 100%
rename from drivers/crypto/vmx/vmx.c
rename to arch/powerpc/crypto/vmx.c
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 79c3bb9c99c3..59644d72c735 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -610,13 +610,13 @@ config CRYPTO_DEV_QCOM_RNG
To compile this driver as a module, choose M here. The
module will be called qcom-rng. If unsure, say N.
-config CRYPTO_DEV_VMX
- bool "Support for VMX cryptographic acceleration instructions"
- depends on PPC64 && VSX
- help
- Support for VMX cryptographic acceleration instructions.
-
-source "drivers/crypto/vmx/Kconfig"
+#config CRYPTO_DEV_VMX
+# bool "Support for VMX cryptographic acceleration instructions"
+# depends on PPC64 && VSX
+# help
+# Support for VMX cryptographic acceleration instructions.
+#
+#source "drivers/crypto/vmx/Kconfig"
config CRYPTO_DEV_IMGTEC_HASH
tristate "Imagination Technologies hardware hash accelerator"
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index d859d6a5f3a4..95331bc6456b 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -42,7 +42,7 @@ obj-$(CONFIG_CRYPTO_DEV_SL3516) += gemini/
obj-y += stm32/
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
-obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
+#obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
obj-$(CONFIG_CRYPTO_DEV_SAFEXCEL) += inside-secure/
obj-$(CONFIG_CRYPTO_DEV_ARTPEC6) += axis/
diff --git a/drivers/crypto/vmx/.gitignore b/drivers/crypto/vmx/.gitignore
deleted file mode 100644
index 7aa71d83f739..000000000000
--- a/drivers/crypto/vmx/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-aesp8-ppc.S
-ghashp8-ppc.S
diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig
deleted file mode 100644
index b2c28b87f14b..000000000000
--- a/drivers/crypto/vmx/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config CRYPTO_DEV_VMX_ENCRYPT
- tristate "Encryption acceleration support on P8 CPU"
- depends on CRYPTO_DEV_VMX
- select CRYPTO_AES
- select CRYPTO_CBC
- select CRYPTO_CTR
- select CRYPTO_GHASH
- select CRYPTO_XTS
- default m
- help
- Support for VMX cryptographic acceleration instructions on Power8 CPU.
- This module supports acceleration for AES and GHASH in hardware. If you
- choose 'M' here, this module will be called vmx-crypto.
diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
deleted file mode 100644
index 7257b8c44626..000000000000
--- a/drivers/crypto/vmx/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
-vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
-
-ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-override flavour := linux-ppc64le
-else
-ifdef CONFIG_PPC64_ELF_ABI_V2
-override flavour := linux-ppc64-elfv2
-else
-override flavour := linux-ppc64
-endif
-endif
-
-quiet_cmd_perl = PERL $@
- cmd_perl = $(PERL) $< $(flavour) > $@
-
-targets += aesp8-ppc.S ghashp8-ppc.S
-
-$(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE
- $(call if_changed,perl)
-
-OBJECT_FILES_NON_STANDARD_aesp8-ppc.o := y
diff --git a/drivers/crypto/vmx/ppc-xlate.pl b/drivers/crypto/vmx/ppc-xlate.pl
deleted file mode 100644
index b583898c11ae..000000000000
--- a/drivers/crypto/vmx/ppc-xlate.pl
+++ /dev/null
@@ -1,231 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# PowerPC assembler distiller by <appro>.
-
-my $flavour = shift;
-my $output = shift;
-open STDOUT,">$output" || die "can't open $output: $!";
-
-my %GLOBALS;
-my $dotinlocallabels=($flavour=~/linux/)?1:0;
-my $elfv2abi=(($flavour =~ /linux-ppc64le/) or ($flavour =~ /linux-ppc64-elfv2/))?1:0;
-my $dotfunctions=($elfv2abi=~1)?0:1;
-
-################################################################
-# directives which need special treatment on different platforms
-################################################################
-my $globl = sub {
- my $junk = shift;
- my $name = shift;
- my $global = \$GLOBALS{$name};
- my $ret;
-
- $name =~ s|^[\.\_]||;
-
- SWITCH: for ($flavour) {
- /aix/ && do { $name = ".$name";
- last;
- };
- /osx/ && do { $name = "_$name";
- last;
- };
- /linux/
- && do { $ret = "_GLOBAL($name)";
- last;
- };
- }
-
- $ret = ".globl $name\nalign 5\n$name:" if (!$ret);
- $$global = $name;
- $ret;
-};
-my $text = sub {
- my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text";
- $ret = ".abiversion 2\n".$ret if ($elfv2abi);
- $ret;
-};
-my $machine = sub {
- my $junk = shift;
- my $arch = shift;
- if ($flavour =~ /osx/)
- { $arch =~ s/\"//g;
- $arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any");
- }
- ".machine $arch";
-};
-my $size = sub {
- if ($flavour =~ /linux/)
- { shift;
- my $name = shift; $name =~ s|^[\.\_]||;
- my $ret = ".size $name,.-".($dotfunctions?".":"").$name;
- $ret .= "\n.size .$name,.-.$name" if ($dotfunctions);
- $ret;
- }
- else
- { ""; }
-};
-my $asciz = sub {
- shift;
- my $line = join(",", at _);
- if ($line =~ /^"(.*)"$/)
- { ".byte " . join(",",unpack("C*",$1),0) . "\n.align 2"; }
- else
- { ""; }
-};
-my $quad = sub {
- shift;
- my @ret;
- my ($hi,$lo);
- for (@_) {
- if (/^0x([0-9a-f]*?)([0-9a-f]{1,8})$/io)
- { $hi=$1?"0x$1":"0"; $lo="0x$2"; }
- elsif (/^([0-9]+)$/o)
- { $hi=$1>>32; $lo=$1&0xffffffff; } # error-prone with 32-bit perl
- else
- { $hi=undef; $lo=$_; }
-
- if (defined($hi))
- { push(@ret,$flavour=~/le$/o?".long\t$lo,$hi":".long\t$hi,$lo"); }
- else
- { push(@ret,".quad $lo"); }
- }
- join("\n", at ret);
-};
-
-################################################################
-# simplified mnemonics not handled by at least one assembler
-################################################################
-my $cmplw = sub {
- my $f = shift;
- my $cr = 0; $cr = shift if ($#_>1);
- # Some out-of-date 32-bit GNU assembler just can't handle cmplw...
- ($flavour =~ /linux.*32/) ?
- " .long ".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 :
- " cmplw ".join(',',$cr, at _);
-};
-my $bdnz = sub {
- my $f = shift;
- my $bo = $f=~/[\+\-]/ ? 16+9 : 16; # optional "to be taken" hint
- " bc $bo,0,".shift;
-} if ($flavour!~/linux/);
-my $bltlr = sub {
- my $f = shift;
- my $bo = $f=~/\-/ ? 12+2 : 12; # optional "not to be taken" hint
- ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
- " .long ".sprintf "0x%x",19<<26|$bo<<21|16<<1 :
- " bclr $bo,0";
-};
-my $bnelr = sub {
- my $f = shift;
- my $bo = $f=~/\-/ ? 4+2 : 4; # optional "not to be taken" hint
- ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
- " .long ".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 :
- " bclr $bo,2";
-};
-my $beqlr = sub {
- my $f = shift;
- my $bo = $f=~/-/ ? 12+2 : 12; # optional "not to be taken" hint
- ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
- " .long ".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 :
- " bclr $bo,2";
-};
-# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two
-# arguments is 64, with "operand out of range" error.
-my $extrdi = sub {
- my ($f,$ra,$rs,$n,$b) = @_;
- $b = ($b+$n)&63; $n = 64-$n;
- " rldicl $ra,$rs,$b,$n";
-};
-my $vmr = sub {
- my ($f,$vx,$vy) = @_;
- " vor $vx,$vy,$vy";
-};
-
-# Some ABIs specify vrsave, special-purpose register #256, as reserved
-# for system use.
-my $no_vrsave = ($elfv2abi);
-my $mtspr = sub {
- my ($f,$idx,$ra) = @_;
- if ($idx == 256 && $no_vrsave) {
- " or $ra,$ra,$ra";
- } else {
- " mtspr $idx,$ra";
- }
-};
-my $mfspr = sub {
- my ($f,$rd,$idx) = @_;
- if ($idx == 256 && $no_vrsave) {
- " li $rd,-1";
- } else {
- " mfspr $rd,$idx";
- }
-};
-
-# PowerISA 2.06 stuff
-sub vsxmem_op {
- my ($f, $vrt, $ra, $rb, $op) = @_;
- " .long ".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|($rb<<11)|($op*2+1);
-}
-# made-up unaligned memory reference AltiVec/VMX instructions
-my $lvx_u = sub { vsxmem_op(@_, 844); }; # lxvd2x
-my $stvx_u = sub { vsxmem_op(@_, 972); }; # stxvd2x
-my $lvdx_u = sub { vsxmem_op(@_, 588); }; # lxsdx
-my $stvdx_u = sub { vsxmem_op(@_, 716); }; # stxsdx
-my $lvx_4w = sub { vsxmem_op(@_, 780); }; # lxvw4x
-my $stvx_4w = sub { vsxmem_op(@_, 908); }; # stxvw4x
-
-# PowerISA 2.07 stuff
-sub vcrypto_op {
- my ($f, $vrt, $vra, $vrb, $op) = @_;
- " .long ".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|$op;
-}
-my $vcipher = sub { vcrypto_op(@_, 1288); };
-my $vcipherlast = sub { vcrypto_op(@_, 1289); };
-my $vncipher = sub { vcrypto_op(@_, 1352); };
-my $vncipherlast= sub { vcrypto_op(@_, 1353); };
-my $vsbox = sub { vcrypto_op(@_, 0, 1480); };
-my $vshasigmad = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1730); };
-my $vshasigmaw = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1666); };
-my $vpmsumb = sub { vcrypto_op(@_, 1032); };
-my $vpmsumd = sub { vcrypto_op(@_, 1224); };
-my $vpmsubh = sub { vcrypto_op(@_, 1096); };
-my $vpmsumw = sub { vcrypto_op(@_, 1160); };
-my $vaddudm = sub { vcrypto_op(@_, 192); };
-my $vadduqm = sub { vcrypto_op(@_, 256); };
-
-my $mtsle = sub {
- my ($f, $arg) = @_;
- " .long ".sprintf "0x%X",(31<<26)|($arg<<21)|(147*2);
-};
-
-print "#include <asm/ppc_asm.h>\n" if $flavour =~ /linux/;
-
-while($line=<>) {
-
- $line =~ s|[#!;].*$||; # get rid of asm-style comments...
- $line =~ s|/\*.*\*/||; # ... and C-style comments...
- $line =~ s|^\s+||; # ... and skip white spaces in beginning...
- $line =~ s|\s+$||; # ... and at the end
-
- {
- $line =~ s|\b\.L(\w+)|L$1|g; # common denominator for Locallabel
- $line =~ s|\bL(\w+)|\.L$1|g if ($dotinlocallabels);
- }
-
- {
- $line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||;
- my $c = $1; $c = "\t" if ($c eq "");
- my $mnemonic = $2;
- my $f = $3;
- my $opcode = eval("\$$mnemonic");
- $line =~ s/\b(c?[rf]|v|vs)([0-9]+)\b/$2/g if ($c ne "." and $flavour !~ /osx/);
- if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(',',$line)); }
- elsif ($mnemonic) { $line = $c.$mnemonic.$f."\t".$line; }
- }
-
- print $line if ($line);
- print "\n";
-}
-
-close STDOUT;
--
2.31.1
More information about the Linuxppc-dev
mailing list