[PATCH v4 5/5] net: wan: fsl_qmc_hdlc: Add framer support

[Herve Codina]

Hi Andy,

On Thu, 22 Feb 2024 17:49:40 +0200
Andy Shevchenko <andriy.shevchenko at linux.intel.com> wrote:

> On Thu, Feb 22, 2024 at 03:22:18PM +0100, Herve Codina wrote:
> > Add framer support in the fsl_qmc_hdlc driver in order to be able to
> > signal carrier changes to the network stack based on the framer status
> > Also use this framer to provide information related to the E1/T1 line
> > interface on IF_GET_IFACE and configure the line interface according to
> > IF_IFACE_{E1,T1} information.  
> 
> ...
> 
> > +static int qmc_hdlc_framer_set_carrier(struct qmc_hdlc *qmc_hdlc)
> > +{
> > +	struct framer_status framer_status;
> > +	unsigned long flags;
> > +	int ret;
> > +
> > +	if (!qmc_hdlc->framer)
> > +		return 0;  
> 
> > +	spin_lock_irqsave(&qmc_hdlc->carrier_lock, flags);  
> 
> cleanup.h ?
> 
> > +	ret = framer_get_status(qmc_hdlc->framer, &framer_status);
> > +	if (ret) {
> > +		dev_err(qmc_hdlc->dev, "get framer status failed (%d)\n", ret);
> > +		goto end;
> > +	}
> > +	if (framer_status.link_is_on)
> > +		netif_carrier_on(qmc_hdlc->netdev);
> > +	else
> > +		netif_carrier_off(qmc_hdlc->netdev);
> > +
> > +end:
> > +	spin_unlock_irqrestore(&qmc_hdlc->carrier_lock, flags);
> > +	return ret;
> > +}  
> 

I've got an issue with guard(spinlock_irqsave).

I changed this code to:
--- 8< ---
static int qmc_hdlc_framer_set_carrier(struct qmc_hdlc *qmc_hdlc)
{
	struct framer_status framer_status;
	int ret;

	if (!qmc_hdlc->framer)
		return 0;

	guard(spinlock_irqsave)(&qmc_hdlc->carrier_lock);

	ret = framer_get_status(qmc_hdlc->framer, &framer_status);
	if (ret) {
		dev_err(qmc_hdlc->dev, "get framer status failed (%d)\n", ret);
		return ret;
	}
	if (framer_status.link_is_on)
		netif_carrier_on(qmc_hdlc->netdev);
	else
		netif_carrier_off(qmc_hdlc->netdev);

	return 0;
}
--- 8< ---

I have the following warning (make C=1):
drivers/net/wan/fsl_qmc_hdlc.c:49:12: warning: context imbalance in 'qmc_hdlc_framer_set_carrier' - wrong count at exit

I also tried to call guard(spinlock_irqsave) before 'if (!qmc_hdlc->framer)'
but it does not change anything.

Did I miss something in the guard(spinlock_irqsave) usage ?

Best regards,
Hervé