[PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
Conor Dooley
conor at kernel.org
Thu Feb 15 02:54:57 AEDT 2024
On Wed, Feb 14, 2024 at 07:34:30AM -0800, Palmer Dabbelt wrote:
> From: Palmer Dabbelt <palmer at rivosinc.com>
>
> The new SBI console has the same problem as the old one: there's only
> one shared backing hardware and no synchronization, so the two drivers
> end up stepping on each other. This was the same issue the old SBI-0.1
> console drivers had, but that was disabled by default when SBI-0.1 was.
>
> So just mark the new driver as nonportable.
>
> Reported-by: Emil Renner Berthing <kernel at esmil.dk>
> Fixes: 88ead68e764c ("tty: Add SBI debug console support to HVC SBI driver")
> Signed-off-by: Palmer Dabbelt <palmer at rivosinc.com>
As was brought up when we covered this earlier today, if you're going to
probe a driver based on an ecall, the same hardware should not remain
enabled in the DT passed to the kernel.
If you want to enable this driver in a multiplatform kernel alongside
"real" drivers, then the solution is simple, firmware needs implementation
needs to patch the DT and, at least, mark the uart as reserved if it is
using it to provide the debug console. Marking this nonportable so that
people only walk into this with their eyes open seems like a reasonable
action to me.
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Cheers,
Conor.
> ---
> drivers/tty/hvc/Kconfig | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 6e05c5c7bca1..c2a4e88b328f 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,13 +108,15 @@ config HVC_DCC_SERIALIZE_SMP
>
> config HVC_RISCV_SBI
> bool "RISC-V SBI console support"
> - depends on RISCV_SBI
> + depends on RISCV_SBI && NONPORTABLE
> select HVC_DRIVER
> help
> This enables support for console output via RISC-V SBI calls, which
> - is normally used only during boot to output printk.
> + is normally used only during boot to output printk. This driver
> + conflicts with real console drivers and should not be enabled on
> + systems that directly access the console.
>
> - If you don't know what do to here, say Y.
> + If you don't know what do to here, say N.
>
> config HVCS
> tristate "IBM Hypervisor Virtual Console Server support"
> --
> 2.43.0
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20240214/164099e5/attachment.sig>
More information about the Linuxppc-dev
mailing list