[PATCH 1/1] ALSA: aoa: soundbus: i2sbus: pcm: use 'time_left' variable with wait_for_completion_timeout()

[Wolfram Sang]

There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Fix to the proper variable type 'unsigned long' while here.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
 sound/aoa/soundbus/i2sbus/pcm.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/aoa/soundbus/i2sbus/pcm.c b/sound/aoa/soundbus/i2sbus/pcm.c
index 07df5cc0f2d7..98b812ffbde6 100644
--- a/sound/aoa/soundbus/i2sbus/pcm.c
+++ b/sound/aoa/soundbus/i2sbus/pcm.c
@@ -255,24 +255,24 @@ static void i2sbus_wait_for_stop(struct i2sbus_dev *i2sdev,
 {
 	unsigned long flags;
 	DECLARE_COMPLETION_ONSTACK(done);
-	long timeout;
+	unsigned long time_left;
 
 	spin_lock_irqsave(&i2sdev->low_lock, flags);
 	if (pi->dbdma_ring.stopping) {
 		pi->stop_completion = &done;
 		spin_unlock_irqrestore(&i2sdev->low_lock, flags);
-		timeout = wait_for_completion_timeout(&done, HZ);
+		time_left = wait_for_completion_timeout(&done, HZ);
 		spin_lock_irqsave(&i2sdev->low_lock, flags);
 		pi->stop_completion = NULL;
-		if (timeout == 0) {
+		if (time_left == 0) {
 			/* timeout expired, stop dbdma forcefully */
 			printk(KERN_ERR "i2sbus_wait_for_stop: timed out\n");
 			/* make sure RUN, PAUSE and S0 bits are cleared */
 			out_le32(&pi->dbdma->control, (RUN | PAUSE | 1) << 16);
 			pi->dbdma_ring.stopping = 0;
-			timeout = 10;
+			time_left = 10;
 			while (in_le32(&pi->dbdma->status) & ACTIVE) {
-				if (--timeout <= 0)
+				if (--time_left <= 0)
 					break;
 				udelay(1);
 			}
-- 
2.43.0